|Manufacturer||Française de Mécanique|
|Displacement||2,458 cc (2.5 L; 150.0 cu in)|
2,664 cc (2.7 L; 162.6 cu in)
2,849 cc (2.8 L; 173.9 cu in)
2,963 cc (3.0 L; 180.8 cu in)
2,975 cc (3.0 L; 181.5 cu in)
|Cylinder bore||88 mm (3.46 in)|
91 mm (3.58 in)
93 mm (3.66 in)
|Piston stroke||63 mm (2.48 in)|
72.7 mm (2.86 in)
73 mm (2.87 in)
|Valvetrain||SOHC 2 or 4 valves per cyl|
DOHC 4 valves per cyl (race engine)
|Oil system||Wet sump|
|Power output||97–300 kW (132–408 PS; 130–402 bhp)|
|Torque output||208–520 N⋅m (153–384 lbf⋅ft)|
|Successor||V6 ESL engine|
Volvo Modular engine
The V6 PRV engine is an automobile petrol V6 engine that was developed jointly by Peugeot, Renault and Volvo Cars – and sold from 1974 to 1998. It was gradually replaced after 1994 by another joint PSA-Renault design, known as the ES engine at PSA and the L engine at Renault. It was designed and manufactured by the company "Française de Mécanique" for PSA, Renault and Volvo.
In 1966, Peugeot and Renault entered a cooperative agreement to manufacture common components. The first joint subsidiary, La Française de Mécanique (also called Compagnie Française de Mécanique or simply FM) was launched in 1969. The FM factory was built in Douvrin near Lens in northern France. The PRV engines are sometimes referred to as "Douvrin" engines, though that name is more commonly applied to a family of straight-fours produced at the same time.
In 1971, Volvo joined Peugeot and Renault in the creation of the PRV company, a public limited company (plc) in which each of the three manufacturers owned an equal portion. The company originally planned to build V8 engines, although these were later scrapped in favor of a smaller and more fuel-efficient V6.
The PRV engine could be seen as a V8 with two missing cylinders, having a 90-degree angle between cylinder banks, rather than the customary 60, but with crankpins being 120 degrees apart. The Maserati V6 of the Citroën SM followed a remarkably similar pattern of development.
Additionally, Renault needed a V6 engine to fit in its new model, the Renault 30. Renault's internal designation for the PRV was Z-Type.
Machinery for assembling the engines arrived at Douvrin in early June 1973, and buildings for producing the engines were finished in January 1974. The first PRV engines were officially introduced on 3 October 1974 in the Volvo 264. Adoption was swift, and the PRV V6 had been sold in at least five different models by the end of 1975.
In 1984, the first commercially available turbocharged PRV V6 was sold in the Renault 25 V6 Turbo. This was the first to be even-fire with split crankpins, and was the first of the second generation, and indeed EFI engine of any sort. Turbocharged versions went on to be used in the Renault Alpine GTA V6 Turbo (essentially the same engine as the 25 Turbo at 2.5 L (2,458 cc), Renault Alpine A610, and Renault Safrane Bi-turbo – both with 3.0 L (2,963 cc) low compression. Naturally aspirated 2963 cc and 2975 cc versions of both low- and high-compression 3-litre engines appeared in a number of Peugeot, Citroën and Renault cars until 1997.
While Renault were working forced induction into the PRV, Peugeot and Citroën developed their own 24-valve engines as an option in the 605 and XM respectively. The compression remained the same as the Renault 12v, but the pistons differed, as did some of the timing gear, and the heads were re-engineered to allow easier maintenance (the camshaft being fitted from the opposite end for example). This engine was however extremely expensive, and suffered cam wear problems. This was due to the exhaust valves sharing a single lobe, while each inlet valve had its own lobe. This was at least partially solved by the use of ceramic followers as one of a succession of recalls.
Meanwhile, French supercar manufacturer Venturi had been developing their own versions of the PRV. The most powerful versions they built were in the Atlantique 300 at 207 kilowatts (281 PS; 278 bhp) from a single turbocharged 3.0 L 12v, and they successfully raced at the 24 Hours of Le Mans with the 600LM with a twin turbocharged 24v 3.0-litre, pushing out over 450 kilowatts (610 PS; 600 bhp) in race spec, and the road-going spin-off, the 400GT managed 300 kilowatts (408 PS; 402 bhp). This used the low compression bottom end common to the Renault turbo engines, coupled to 24-valve cylinder heads with bespoke rockers and tappets.
Peugeot too allowed a small group of engineers to create a team for endurance racing, and after a few years the team grew to be called WM Peugeot. The ultimate version of the car used a low compression 3.0-litre bottom end coupled to bespoke twin-cam heads. It is the only DOHC PRV. This car still holds the top speed record at 24 Hours of Le Mans set in 1988. By taping over the engine cooling intakes to improve aerodynamics, the team managed to push the car to 407 kilometres per hour (253 mph) on the 5 kilometres (3.1 mi) straight before the engine was destroyed.
After producing 970,315 units, production of the PRV V6 was stopped on 15 June 1998.
Uneven firing order
The original engineering work done on the V8 engine can still be seen in the resulting V6 engine: its cylinder banks are arranged at 90°, instead of the much more common 60°. V8 engines nearly universally feature 90° configurations, because this allows for a natural firing order. V6 engines, on the other hand, produce even firing intervals between cylinders when their two banks of cylinders are arranged at 60°. 90-degree V6 engines, like the PRV, experience uneven firing, which can be addressed using split crankshaft journals. 90° V6 engines are shorter and wider than 60° engines, allowing lower engine bay hood/bonnet profiles.
First-generation PRV engines (1974–1985) featured uneven firing order. Second generation PRV engines (introduced in 1984 in the Renault 25 Turbo) featured split crankshaft journals to create evenly spaced ignition events. Other similar design examples are the odd-fire and even-fire Buick V6 and the Maserati V6 seen in the Citroën SM.
- Z6W-A 700: 2849 cc carbureted version used in Renault Alpine V6 GT
- Z7U-702: Used in the Renault 25 V6 Turbo
- Z7U-730: turbocharged version used in the Renault Alpine V6 Turbo
- Z7X-711: Used in the Eagle Premier/Dodge Monaco
- Z7X-715: Used in the Eagle Premier/Dodge Monaco
- Z7X-726: Renault Safrane Bi-turbo
- Z7X-744: Renault Alpine A610
- ZM112: Carbureted version used in the Peugeot 504
- ZMJ140: Fuel-injected version used in the Peugeot 504
- ZMJ-159: Fuel-injected version used in the DMC DeLorean
- ZN3J: Fuel-injected version used in the US-spec Peugeot 505
- ZNJK: Fuel-injected version used in the Peugeot 604
- ZPJ S6A: Fuel-injected version used in the Peugeot 605 and the Citroën XM
- ZPJ4 SKZ: Fuel-injected multivalve version used in the Peugeot 605 and the Citroën XM
- B27A: Carbureted version used in the Volvo 260
- B27E: Fuel-injected version used in the Volvo 260
- B27F: Low compression fuel-injected version used in the Volvo 260
- B28A: Carbureted version used in the Volvo 260
- B28E: Fuel-injected version used in the Volvo 260 and the Volvo 760
- B28F: Low compression fuel-injected version used in the Volvo 260 and the Volvo 760
- B280E: Fuel-injected version used in the Volvo 760 and the Volvo 960 for the 1st year in certain markets
- B280F: Low compression fuel-injected version used in the Volvo 760, Volvo 780 and the Volvo 960 for the first year in certain markets
|Displacement||2458 cc||2664 cc||2849 cc||2963 cc||2975 cc|
|Bore x stroke||91 mm × 63 mm||88 mm × 73 mm||91 mm × 73 mm||93 mm × 72.7 mm||93 mm × 73 mm|
|Number of valves||12-valve||12 or 24-valve|
|Engine aspiration||Turbo||Naturally aspirated||Naturally aspirated or Turbo|
|Power||134–136 kW (182–185 PS; 180–182 bhp) at 5500 rpm||92–110 kW (125–150 PS; 123–148 bhp) at 5500-6000 rpm||95–143 kW (129–194 PS; 127–192 bhp) at 5500-6000 rpm||123–147 kW (167–200 PS; 165–197 bhp) at 5500-6000 rpm
184 kW (250 PS; 247 bhp) at 5000-5750 rpm (Turbo)
|123–147 kW (167–200 PS; 165–197 bhp) at 5600-6000 rpm|
184–300 kW (250–408 PS; 247–402 bhp) at 5750 rpm (Turbo)
|Torque||276–288 N⋅m (204–212 lbf⋅ft) at 2200-4000 rpm||207–218 N⋅m (153–161 lbf⋅ft) at 3000-3500 rpm||207–255 N⋅m (153–188 lbf⋅ft) at 2750-4000 rpm||235–260 N⋅m (173–192 lbf⋅ft) at 3600-4600 rpm
350 N⋅m (258 lbf⋅ft) at 2900 rpm (Turbo)
|235–260 N⋅m (173–192 lbf⋅ft) at 3600-4600 rpm|
350–456 N⋅m (258–336 lbf⋅ft) at 2900 rpm (Turbo)
|Weight||–||150 kg (331 lb)||–|
PRV powered automobiles
The dates following each entry denote the introduction of a PRV V6-equipped models.
- 2458 cc:
- 2664 cc:
- 2849 cc:
- Alpine GTA (November 1984 – 1990)
- DMC DeLorean (1981–1983)
- Lancia Thema (1984–1992)
- Panhard ERC
- Panhard VCR
- Peugeot 505 (July 1986–1992)
- Peugeot 604 (1979–1985)
- Peugeot P4
- Peugeot Proxima (1986, prototype)
- Peugeot Oxia (1988, prototype)
- Renault 25 (1988–1992)
- Renault Espace II (1991–1996)
- UMM Alter II (90's)
- Venturi 160 (1987–1992)
- Venturi 260 (1989–1996)
- Volvo 260/264/265 (1980–1982)
- Volvo 262C (1980–1981)
- Volvo 760/780 (February 1982–1991)
- Volvo 960 (rare 1991 models)
- 2963 cc:
- 2975 cc:
PRV engines in racing
- ALD C289 (1992 24 Hours of Le Mans endurance prototype)
- Alpine A310 Group 4 & B/12
- Alpine A610 GT2
- Chevron B36 (1987 24 Hours of Le Mans endurance prototype)
- Fouquet buggies
- Peugeot 504 V6 Coupé Rallye Group 4
- Peugeot P4 V6 Paris Dakar
- RJ Racing Helem V6
- Schlesser Original
- UMM Alter II
- Venturi 260LM, 400GTR, 500LM and 600LM
- WM P series (1976-1989 24 Hours of Le Mans endurance prototypes, including P80 that finished at 4th place at 1980 24 Hours of Le Mans and the famous P88 that was known for breaking Mulsanne Straight speed record with 407 km/h (253 mph) at 1988 24 Hours of Le Mans)
- Ultima Mk1/2/3
The PRV was also the basis for the 90° V6 engine used by Alfa Romeo in the 155 V6 Ti in the 1996 DTM/ITC season from Silverstone onwards. The engines in that series required the use of bank separation angle and cylinder bore spacing from a production based engine, and as a 90° V6 has greater room between banks than a 60° V6 for a more optimal induction system, Alfa Romeo used the PRV as a basis as it had been used in the Lancia Thema, a car which shared its platform with the Alfa Romeo 164, as well as the Fiat Croma and Saab 9000. 
Other sources declare that the 90° V6 engine in 1996 Alfa Romeo 155 V6 Ti is based on a 2.6 L V8 from 1970 Alfa Romeo Montreal with 2 cylinders removed, as allowed by the rules, however the FIA homologation documentation shows the homologated production engine was a "2850cm³" capacity "V6" engine. The bore spacing of the Montreal engine was too close to be suitable for the 155 V6 Ti in any case. Limone invented the "Montreal V8" story to throw the press off the scent and to satisfy FIAT management who were unhappy that a non-FIAT group developed engine was being used.
- "Peugeot 604 SL". PRV V6 Engine. Retrieved 18 December 2011.
- "The Brief History of the Douvrin PRV V6 Engine". The Douvrin PRV V6 Resource Centre. Archived from the original on 12 September 2004. Retrieved 30 August 2009.
- Citroen Technical bulletin for XM. Bulletin binder number MAN 058930
- "The Douvrin PRV V6 Resource Centre". The Douvrin PRV V6 Resource Centre. Archived from the original on 16 February 2009. Retrieved 30 August 2009.
- YouTube: Limone Racconta: La verità sul motore Alfa 155 V6 Ti + 156 e Fulvia Concept - Davide Cironi (SUBS) - YouTube, accessdate: 26. July 2018
- Collins, Peter (2012). Alfa Romeo 155/156/147 Competition Touring Cars. Dorset, England: Veloce Publishing. pp. 91–94. ISBN 978-1-845843-42-7.
- "Registro Italiano Alfa Romeo 155". Alfa Romeo 155 V6 Ti (in Italian). Retrieved 27 April 2013.
- Collins, Peter (2012). Alfa Romeo 155/1&6/147 Competition Touring Cars. Dorset, England: Veloce Publishing. pp. 92–94. ISBN 978-1-845843-42-7.
|Wikimedia Commons has media related to PRV engine.|