This article includes a list of general references, but it remains largely unverified because it lacks sufficient corresponding inline citations. (July 2013) |

In mathematics, the **total derivative** of a function f at a point is the best linear approximation near this point of the function with respect to its arguments. Unlike partial derivatives, the total derivative approximates the function with respect to all of its arguments, not just a single one. In many situations, this is the same as considering all partial derivatives simultaneously. The term "total derivative" is primarily used when f is a function of several variables, because when f is a function of a single variable, the total derivative is the same as the ordinary derivative of the function.^{[1]}^{:198–203}

## The total derivative as a linear map

Let be an open subset. Then a function is said to be (**totally**) **differentiable** at a point if there exists a linear transformation such that

The linear map is called the (**total**) **derivative** or (**total**) **differential** of at . Other notations for the total derivative include and . A function is (**totally**) **differentiable** if its total derivative exists at every point in its domain.

Conceptually, the definition of the total derivative expresses the idea that is the best linear approximation to at the point . This can be made precise by quantifying the error in the linear approximation determined by . To do so, write

where equals the error in the approximation. To say that the derivative of at is is equivalent to the statement

where is little-o notation and indicates that is much smaller than as . The total derivative is the *unique* linear transformation for which the error term is this small, and this is the sense in which it is the best linear approximation to .

The function is differentiable if and only if each of its components is differentiable, so when studying total derivatives, it is often possible to work one coordinate at a time in the codomain. However, the same is not true of the coordinates in the domain. It is true that if is differentiable at , then each partial derivative exists at . The converse is false: It can happen that all of the partial derivatives of at exist, but is not differentiable at . This means that the function is very "rough" at , to such an extreme that its behavior cannot be adequately described by its behavior in the coordinate directions. When is not so rough, this cannot happen. More precisely, if all the partial derivatives of at exist and are continuous in a neighborhood of , then is differentiable at . When this happens, then in addition, the total derivative of is the linear transformation corresponding to the Jacobian matrix of partial derivatives at that point.^{[2]}

## The total derivative as a differential form

When the function under consideration is real-valued, the total derivative can be recast using differential forms. For example, suppose that is a differentiable function of variables . The total derivative of at may be written in terms of its Jacobian matrix, which in this instance is a row matrix:

The linear approximation property of the total derivative implies that if

is a small vector (where the denotes transpose, so that this vector is a column vector), then

Heuristically, this suggests that if are infinitesimal increments in the coordinate directions, then

In fact, the notion of the infinitesimal, which is merely symbolic here, can be equipped with extensive mathematical structure. Techniques, such as the theory of differential forms, effectively give analytical and algebraic descriptions of objects like infinitesimal increments, . For instance, may be inscribed as a linear functional on the vector space . Evaluating at a vector in measures how much points in the th coordinate direction. The total derivative is a linear combination of linear functionals and hence is itself a linear functional. The evaluation measures how much points in the direction determined by at , and this direction is the gradient. This point of view makes the total derivative an instance of the exterior derivative.

Suppose now that is a vector-valued function, that is, . In this case, the components of are real-valued functions, so they have associated differential forms . The total derivative amalgamates these forms into a single object and is therefore an instance of a vector-valued differential form.

## The chain rule for total derivatives

The chain rule has a particularly elegant statement in terms of total derivatives. It says that, for two functions and , the total derivative of the composite function at satisfies

If the total derivatives of and are identified with their Jacobian matrices, then the composite on the right-hand side is simply matrix multiplication. This is enormously useful in applications, as it makes it possible to account for essentially arbitrary dependencies among the arguments of a composite function.

### Example: Differentiation with direct dependencies

Suppose that *f* is a function of two variables, *x* and *y*. If these two variables are independent, so that the domain of *f* is , then the behavior of *f* may be understood in terms of its partial derivatives in the *x* and *y* directions. However, in some situations, *x* and *y* may be dependent. For example, it might happen that *f* is constrained to a curve . In this case, we are actually interested in the behavior of the composite function . The partial derivative of *f* with respect to *x* does not give the true rate of change of *f* with respect to changing *x* because changing *x* necessarily changes *y*. However, the chain rule for the total derivative takes such dependencies into account. Write . Then, the chain rule says

By expressing the total derivative using Jacobian matrices, this becomes:

Suppressing the evaluation at for legibility, we may also write this as

This gives a straightforward formula for the derivative of in terms of the partial derivatives of and the derivative of .

For example, suppose

The rate of change of *f* with respect to *x* is usually the partial derivative of *f* with respect to *x*; in this case,

However, if *y* depends on *x*, the partial derivative does not give the true rate of change of *f* as *x* changes because the partial derivative assumes that *y* is fixed. Suppose we are constrained to the line

Then

and the total derivative of *f* with respect to *x* is

which we see is not equal to the partial derivative . Instead of immediately substituting for *y* in terms of *x*, however, we can also use the chain rule as above:

### Example: Differentiation with indirect dependencies

While one can often perform substitutions to eliminate indirect dependencies, the chain rule provides for a more efficient and general technique. Suppose is a function of time and variables which themselves depend on time. Then, the time derivative of is

The chain rule expresses this derivative in terms of the partial derivatives of and the time derivatives of the functions :

This expression is often used in physics for a gauge transformation of the Lagrangian, as two Lagrangians that differ only by the total time derivative of a function of time and the generalized coordinates lead to the same equations of motion. An interesting example concerns the resolution of causality concerning the Wheeler–Feynman time-symmetric theory. The operator in brackets (in the final expression above) is also called the total derivative operator (with respect to ).

For example, the total derivative of is

Here there is no term since itself does not depend on the independent variable directly.

## Total differential equation

A *total differential equation* is a differential equation expressed in terms of total derivatives. Since the exterior derivative is coordinate-free, in a sense that can be given a technical meaning, such equations are intrinsic and *geometric*.

## Application to equation systems

In economics, it is common for the total derivative to arise in the context of a system of equations.^{[1]}^{:pp. 217–220} For example, a simple supply-demand system might specify the quantity *q* of a product demanded as a function *D* of its price *p* and consumers' income *I*, the latter being an exogenous variable, and might specify the quantity supplied by producers as a function *S* of its price and two exogenous resource cost variables *r* and *w*. The resulting system of equations

determines the market equilibrium values of the variables *p* and *q*. The total derivative of *p* with respect to *r*, for example, gives the sign and magnitude of the reaction of the market price to the exogenous variable *r*. In the indicated system, there are a total of six possible total derivatives, also known in this context as comparative static derivatives: *dp* / *dr*, *dp* / *dw*, *dp* / *dI*, *dq* / *dr*, *dq* / *dw*, and *dq* / *dI*. The total derivatives are found by totally differentiating the system of equations, dividing through by, say *dr*, treating *dq* / *dr* and *dp* / *dr* as the unknowns, setting *dI* = *dw* = 0, and solving the two totally differentiated equations simultaneously, typically by using Cramer's rule.

## See also

- Directional derivative
- Gradient#Total derivative
- Fréchet derivative - generalization of the total derivative

## References

- ^
^{a}^{b}Chiang, Alpha C. (1984).*Fundamental Methods of Mathematical Economics*(Third ed.). McGraw-Hill. ISBN 0-07-010813-7. **^**Abraham, Ralph; Marsden, J. E.; Ratiu, Tudor (2012).*Manifolds, Tensor Analysis, and Applications*. Springer Science & Business Media. p. 78.

- A. D. Polyanin and V. F. Zaitsev,
*Handbook of Exact Solutions for Ordinary Differential Equations (2nd edition)*, Chapman & Hall/CRC Press, Boca Raton, 2003. ISBN 1-58488-297-2 - From thesaurus.maths.org total derivative