Sealant is a substance used to block the passage of fluids through the surface or joints or openings in materials, a type of mechanical seal. In building construction sealant is sometimes synonymous with caulking and also serve the purposes of blocking dust, sound and heat transmission. Sealants may be weak or strong, flexible or rigid, permanent or temporary. Sealants are not adhesives but some have adhesive qualities and are called adhesive-sealants or structural sealants.
Sealants were first used in prehistory in the broadest sense as mud, grass and reeds to seal dwellings from the weather such as the daub in wattle and daub and thatching. Natural sealants and adhesive-sealants included plant resins such as pine pitch and birch pitch, bitumen, wax, tar, natural gum, clay (mud) mortar, lime mortar, lead, blood and egg. In the 17th century glazing putty was first used to seal window glass made with linseed oil and chalk, later other drying oils were also used to make oil-based putties which were often referred to as caulks. In the 1920s polymers such as acrylic polymers, butyl polymers and silicone polymers were first developed and used in sealants. By the 1960s synthetic-polymer-based sealants were widely available.
Sealants, despite not having great strength, convey a number of properties. They seal top structures to the substrate, and are particularly effective in waterproofing processes by keeping moisture out (or in) the components in which they are used. They can provide thermal and acoustical insulation, and may serve as fire barriers. They may have electrical properties, as well. Sealants can also be used for simple smoothing or filling. They are often called upon to perform several of these functions at once.
A caulking sealant has three basic functions: It fills a gap between two or more substrates; it forms a barrier through the physical properties of the sealant itself and by adhesion to the substrate; and, it maintains sealing properties for the expected lifetime, service conditions, and environments. The sealant performs these functions by way of correct formulation to achieve specific application and performance properties. Other than adhesives, however, there are few functional alternatives to the sealing process.
Soldering or welding can perhaps be used as alternatives in certain instances, depending on the substrates and the relative movement that the substrates will see in service. However, the simplicity and reliability offered by organic elastomers usually make them the clear choice for performing these functions.
Types of sealants
A sealant may be viscous material that has little or no flow characteristics and which stay where they are applied; or they can be thin and runny so as to allow it to penetrate the substrate by means of capillary action.
Anaerobic acrylic sealants (generally referred to as impregnants) are the most desirable, as they are required to cure in the absence of air, unlike surface sealants that require air as part of the cure mechanism that changes state to become solid, once applied, and is used to prevent the penetration of air, gas, noise, dust, fire, smoke, or liquid from one location through a barrier into another.
Typically, sealants are used to close small openings that are difficult to shut with other materials, such as concrete, drywall, etc. Desirable properties of sealants include insolubility, corrosion resistance, and adhesion. Uses of sealants vary widely and sealants are used in many industries, for example, construction, automotive and aerospace industries.
Sealants can be categorized in accordance with varying criteria, e. g. in accordance with the reactivity of the product in the ready-to-use condition or on the basis of its mechanical behavior after installation.
Often the intended use or the chemical basis is used to classify sealants, too. A typical classification system for most commonly used sealants is shown below.
Types of sealants fall between the higher-strength, adhesive-derived sealers and coatings at one end, and extremely low-strength putties, waxes, and caulks at the other. Putties and caulks serve only one function – i.e., to take up space and fill voids. Sealants maybe based on Silicone - and has a proven long life and is unaffected by UV or extremes of weather or temperature.
See below for other common types of sealants -
- Acrylic resins
- Acoustic sealants
- Adhesive sealants
- Butyl rubber
- Dental sealants
- Elastic sealants
- Electronic sealants
- Epoxy thermosets
- Extruded sealants
- Fibrin glue
- Firestop barrier sealants
- Floor sealant
- Hot wax
- Impregnating sealants
- Latex sealants
- Metal sealants
- Patio sealants
- Paint sealants
- Plastic sealants
- Polysulfide sealants
- Polyurethane sealants
- Rubber sealants
- Seam sealants
- Silicone sealant
- Stone sealer
- Surgical sealant
- Tile sealant
- Urethane sealants
- Valve seal
Common areas of use
- Firewall Sealants - a two-component, firewall sealant intended for use as a coating, sealant or filleting material in the construction, repair and maintenance of aircraft and is especially useful where fire resistance, exposure to phosphate ester fluids, and/or exposure to extreme temperatures -65°F (-54°C) to 400°F (204°C) are major considerations.
- Fuel Tank Sealants - High-temperature fuel resistant sealant intended for use on integral fuel tanks with excellent resistance to other fluids such as water, alcohols, synthetic oils and petroleum-based hydraulic fluids
- Access Door Sealants - Access door sealant intended for use on integral fuel tanks and pressurized cabins with low adhesion characteristics and excellent resistance to other fluids such as water, alcohols, synthetic oils and petroleum based hydraulic fluids.
- Windshield Sealant - Demonstrated to be a useful sealant in a variety of applications where quick setting is desired, for example, windshield sealants, repair caulks, adhesives, etc.
Comparison with adhesives
The main difference between adhesives and sealants is that sealants typically have lower strength and higher elongation than adhesives do. When sealants are used between substrates having different thermal coefficients of expansion or differing elongation under stress, they need to have adequate flexibility and elongation. Sealants generally contain inert filler material and are usually formulated with an elastomer to give the required flexibility and elongation. They usually have a paste consistency to allow filling of gaps between substrates. Low shrinkage after application is often required. Many adhesive technologies can be formulated into sealants.
- "Sealant", Oxford English Dictionary Second Edition on CD-ROM (v. 4.0) Oxford University Press 2009
- Klosowski, Jerome M.; Wolf, Anreas T. (2009). "The History of Selants". In Mittal, K.L.; Pizzi, A. (eds.). Handbook of Sealant Technology. CRC Press. p. 4. ISBN 9781420008630 – via Google Books.
- Klosowski, Jerome M.; Wolf, Anreas T. (2009). "The History of Selants". In Mittal, K.L.; Pizzi, A. (eds.). Handbook of Sealant Technology. CRC Press. p. 5. ISBN 9781420008630 – via Google Books.
- Klosowski, Jerome M.; Wolf, Anreas T. (2009). "The History of Selants". In Mittal, K.L.; Pizzi, A. (eds.). Handbook of Sealant Technology. CRC Press. p. 7. ISBN 9781420008630 – via Google Books.
- Slone, Herbert; Fox, Art (March 12, 2018). "Best practices for masonry wall systems and insulation". constructioncanada.net. Retrieved April 11, 2021.
- Guertin, Mike. "Building Soundproof Walls". Fine Home Building (266 April/May 2017). Retrieved April 11, 2021.
- "Adhesive Bonding". Handbook of Plastics Joining: A Practical Guide (2d ed.). William Andrew. 2008. p. 145. ISBN 978-0-8155-1581-4.
- Manfred Pröbster, Industrial Sealants - Fundamentals, selection and applications, Verlag Moderne Industrie 2004
- "5 Sealing Technologies Commonly Used by Manufacturers Today". roboticsandautomationnews.com. May 22, 2020. Retrieved April 11, 2021.
- Roberts, Dormie (March 18, 2021). "Early Season Best Practices for Sealcoating". forconstructionpros.com. Retrieved April 11, 2021.
- "Russian Cosmonauts Take Spacewalk to Check Site of Capsule Leak". Voice of America. December 11, 2018. Retrieved April 11, 2021.
- World of fresh water : a resource for studying issues of freshwater research. Diane Publishing. 1997. p. 9. ISBN 9781428903814 – via Google Books.
- Jenkins, Richard (April 8, 2021). "Best Outdoor Wood Sealers Comparison and Buyer's Guide". thatpainter.com. Retrieved April 11, 2021.
- "D Aircraft Dapco 18-4F Firewall Sealant | NSL Aerospace". Retrieved 2020-03-13.
- "WS-8020 Class B Sealant - High Temperature Fuel Tank Sealant | NSL Aerospace". Retrieved 2020-03-13.
- "WS-8010 Class B Sealants - Aircraft Access Door Sealant PMF | NSL Aerospace". Retrieved 2020-03-13.
- "Dapco 72 Rapid Curing Windshield Sealant | NSL Aerospace". Retrieved 2020-03-13.