Earth radius  

General information  
Unit system  astronomy, geophysics 
Unit of  distance 
Symbol  R_{⊕} or , 
Conversions  
1 R_{⊕} in ...  ... is equal to ... 
SI base unit  6.3781×10^{6} m^{[1]} 
Metric system  6,357 to 6,378 km 
English units  3,950 to 3,963 mi 
Earth radius (denoted by the symbol R_{⊕} or by ) is the distance from the center of Earth to a point on or near its surface. Approximating the figure of Earth by an Earth spheroid, the radius ranges from a maximum of nearly 6,378 km (3,963 mi) (equatorial radius, denoted a) to a minimum of nearly 6,357 km (3,950 mi) (polar radius, denoted b).
A nominal Earth radius is sometimes used as a unit of measurement in astronomy and geophysics, which is recommended by the International Astronomical Union to be the equatorial value.^{[1]}
A globallyaverage value is usually considered to be 6,371 kilometres (3,959 mi) with a 0.3% variability (+/ 10 km) for the following reasons. The International Union of Geodesy and Geophysics (IUGG) provides three reference values: the mean radius (R_{1}) of three radii measured at two equator points and a pole; the authalic radius, which is the radius of a sphere with the same surface area (R_{2}); and the volumetric radius, which is the radius of a sphere having the same volume as the ellipsoid (R_{3}).^{[2]} All three values are about 6,371 kilometres (3,959 mi).
Other ways to define and measure the Earth radius involve the radius of curvature. A few definitions yield values outside the range between polar radius and equatorial radius because they include local or geoidal topography or because they depend on abstract geometrical considerations.
Introduction
Earth's rotation, internal density variations, and external tidal forces cause its shape to deviate systematically from a perfect sphere.^{[a]} Local topography increases the variance, resulting in a surface of profound complexity. Our descriptions of Earth's surface must be simpler than reality in order to be tractable. Hence, we create models to approximate characteristics of Earth's surface, generally relying on the simplest model that suits the need.
Each of the models in common use involve some notion of the geometric radius. Strictly speaking, spheres are the only solids to have radii, but broader uses of the term radius are common in many fields, including those dealing with models of Earth. The following is a partial list of models of Earth's surface, ordered from exact to more approximate:
 The actual surface of Earth
 The geoid, defined by mean sea level at each point on the real surface^{[b]}
 A spheroid, also called an ellipsoid of revolution, geocentric to model the entire Earth, or else geodetic for regional work^{[c]}
 A sphere
In the case of the geoid and ellipsoids, the fixed distance from any point on the model to the specified center is called "a radius of the Earth" or "the radius of the Earth at that point".^{[d]} It is also common to refer to any mean radius of a spherical model as "the radius of the earth". When considering the Earth's real surface, on the other hand, it is uncommon to refer to a "radius", since there is generally no practical need. Rather, elevation above or below sea level is useful.
Regardless of the model, any radius falls between the polar minimum of about 6,357 km and the equatorial maximum of about 6,378 km (3,950 to 3,963 mi). Hence, the Earth deviates from a perfect sphere by only a third of a percent, which supports the spherical model in most contexts and justifies the term "radius of the Earth". While specific values differ, the concepts in this article generalize to any major planet.
Physics of Earth's deformation
Rotation of a planet causes it to approximate an oblate ellipsoid/spheroid with a bulge at the equator and flattening at the North and South Poles, so that the equatorial radius a is larger than the polar radius b by approximately aq. The oblateness constant q is given by
where ω is the angular frequency, G is the gravitational constant, and M is the mass of the planet.^{[e]} For the Earth 1/q ≈ 289, which is close to the measured inverse flattening 1/f ≈ 298.257. Additionally, the bulge at the equator shows slow variations. The bulge had been decreasing, but since 1998 the bulge has increased, possibly due to redistribution of ocean mass via currents.^{[4]}
The variation in density and crustal thickness causes gravity to vary across the surface and in time, so that the mean sea level differs from the ellipsoid. This difference is the geoid height, positive above or outside the ellipsoid, negative below or inside. The geoid height variation is under 110 m (360 ft) on Earth. The geoid height can change abruptly due to earthquakes (such as the SumatraAndaman earthquake) or reduction in ice masses (such as Greenland).^{[5]}
Not all deformations originate within the Earth. Gravitational attraction from the Moon or Sun can cause the Earth's surface at a given point to vary by tenths of a meter over a nearly 12hour period (see Earth tide).
Radius and local conditions
Given local and transient influences on surface height, the values defined below are based on a "general purpose" model, refined as globally precisely as possible within 5 m (16 ft) of reference ellipsoid height, and to within 100 m (330 ft) of mean sea level (neglecting geoid height).
Additionally, the radius can be estimated from the curvature of the Earth at a point. Like a torus, the curvature at a point will be greatest (tightest) in one direction (north–south on Earth) and smallest (flattest) perpendicularly (east–west). The corresponding radius of curvature depends on the location and direction of measurement from that point. A consequence is that a distance to the true horizon at the equator is slightly shorter in the north–south direction than in the east–west direction.
In summary, local variations in terrain prevent defining a single "precise" radius. One can only adopt an idealized model. Since the estimate by Eratosthenes, many models have been created. Historically, these models were based on regional topography, giving the best reference ellipsoid for the area under survey. As satellite remote sensing and especially the Global Positioning System gained importance, true global models were developed which, while not as accurate for regional work, best approximate the Earth as a whole.
Extrema: equatorial and polar radii
The following radii are derived from the World Geodetic System 1984 (WGS84) reference ellipsoid.^{[6]} It is an idealized surface, and the Earth measurements used to calculate it have an uncertainty of ±2 m in both the equatorial and polar dimensions.^{[7]} Additional discrepancies caused by topographical variation at specific locations can be significant. When identifying the position of an observable location, the use of more precise values for WGS84 radii may not yield a corresponding improvement in accuracy.^{[clarification needed]}
The value for the equatorial radius is defined to the nearest 0.1 m in WGS84. The value for the polar radius in this section has been rounded to the nearest 0.1 m, which is expected to be adequate for most uses. Refer to the WGS84 ellipsoid if a more precise value for its polar radius is needed.
 The Earth's equatorial radius a, or semimajor axis, is the distance from its center to the equator and equals 6,378.1370 km (3,963.1906 mi).^{[8]} The equatorial radius is often used to compare Earth with other planets.
 The Earth's polar radius b, or semiminor axis, is the distance from its center to the North and South Poles, and equals 6,356.7523 km (3,949.9028 mi).
Locationdependent radii
Geocentric radius
The geocentric radius is the distance from the Earth's center to a point on the spheroid surface at geodetic latitude φ:
where a and b are, respectively, the equatorial radius and the polar radius.
The extrema geocentric radii on the ellipsoid coincide with the equatorial and polar radii. They are vertices of the ellipse and also coincide with minimum and maximum radius of curvature.
Radii of curvature
Principal radii of curvature
There are two principal radii of curvature: along the meridional and primevertical normal sections.
Meridional
In particular, the Earth's meridional radius of curvature (in the (north–south) meridian direction) at φ is:
where is the eccentricity of the earth. This is the radius that Eratosthenes measured in his arc measurement.
Prime vertical
If one point had appeared due east of the other, one finds the approximate curvature in the east–west direction.^{[f]}
This Earth's primevertical radius of curvature, also called the Earth's transverse radius of curvature, is defined perpendicular (normal or orthogonal) to M at geodetic latitude φ is:^{[g]}
B. R. Bowring ^{[9]} gives a geometric proof that this is the perpendicular distance from the surface to the polar axis.
Particular values
The Earth's meridional radius of curvature at the equator equals the meridian's semilatus rectum:
 b^{2}/a = 6,335.439 km
The Earth's primevertical radius of curvature at the equator equals the equatorial radius, N = a.
The Earth's polar radius of curvature (either meridional or primevertical) is:
 a^{2}/b = 6,399.594 km
Derivation
Extended content


The principal curvatures are the roots of Equation (125) in:^{[10]} where in the first fundamental form for a surface (Equation (112) in ^{[10]}): E, F, and G are elements of the metric tensor: , , in the second fundamental form for a surface (Equation (123) in ^{[10]}): e, f, and g are elements of the shape tensor: is the unit normal to the surface at , and because and are tangents to the surface, is normal to the surface at . With for an oblate spheroid, the curvatures are
and the principal radii of curvature are
The first and second radii of curvature correspond, respectively, to the Earth's meridional and primevertical radii of curvature. Geometrically, the second fundamental form gives the distance from to the plane tangent at . 
Combined radii of curvature
Azimuthal
The Earth's azimuthal radius of curvature, along a course at an azimuth (measured clockwise from north) α at φ, is derived from Euler's curvature formula as follows:^{[11]}^{:97}
Nondirectional
It is possible to combine the principal radii of curvature above in a nondirectional manner.
The Earth's Gaussian radius of curvature at latitude φ is:^{[11]}
Where K is the Gaussian curvature, .
The Earth's mean radius of curvature at latitude φ is:^{[11]}^{:97}
Global radii
The Earth can be modeled as a sphere in many ways. This section describes the common ways. The various radii derived here use the notation and dimensions noted above for the Earth as derived from the WGS84 ellipsoid;^{[6]} namely,
 Equatorial radius: a = (6378.1370 km)
 Polar radius: b = (6356.7523 km)
A sphere being a gross approximation of the spheroid, which itself is an approximation of the geoid, units are given here in kilometers rather than the millimeter resolution appropriate for geodesy.
Nominal radius
In astronomy, the International Astronomical Union denotes the nominal equatorial Earth radius as , which is defined to be 6,378.1 km (3,963.2 mi).^{[1]}^{:3} The nominal polar Earth radius is defined as = 6,356.8 km (3,949.9 mi). These values correspond to the zero Earth tide convention. Equatorial radius is conventionally used as the nominal value unless the polar radius is explicitly required.^{[1]}^{:4} The nominal radius serves as a unit of length for astronomy. (The notation is defined such that it can be easily generalized for other planets; e.g., for the nominal polar Jupiter radius.)
Mean radius
In geophysics, the International Union of Geodesy and Geophysics (IUGG) defines the Earth's mean radius (denoted R_{1}) to be^{[2]}
The factor of two accounts for the biaxial symmetry in Earth's spheroid, a specialization of triaxial ellipsoid. For Earth, the mean radius is 6,371.0088 km (3,958.7613 mi).^{[12]}
Authalic radius
Earth's authalic radius (meaning "equal area") is the radius of a hypothetical perfect sphere that has the same surface area as the reference ellipsoid. The IUGG denotes the authalic radius as R_{2}.^{[2]} A closedform solution exists for a spheroid:^{[13]}
where e^{2} = a^{2} − b^{2}/a^{2} and A is the surface area of the spheroid.
For the Earth, the authalic radius is 6,371.0072 km (3,958.7603 mi).^{[12]}
Volumetric radius
Another spherical model is defined by the Earth's volumetric radius, which is the radius of a sphere of volume equal to the ellipsoid. The IUGG denotes the volumetric radius as R_{3}.^{[2]}
For Earth, the volumetric radius equals 6,371.0008 km (3,958.7564 mi).^{[12]}
Rectifying radius
Another global radius is the Earth's rectifying radius, giving a sphere with circumference equal to the perimeter of the ellipse described by any polar cross section of the ellipsoid. This requires an elliptic integral to find, given the polar and equatorial radii:
The rectifying radius is equivalent to the meridional mean, which is defined as the average value of M:^{[13]}
For integration limits of [0,π/2], the integrals for rectifying radius and mean radius evaluate to the same result, which, for Earth, amounts to 6,367.4491 km (3,956.5494 mi).
The meridional mean is well approximated by the semicubic mean of the two axes,^{[citation needed]}
which differs from the exact result by less than 1 μm (4×10^{−5} in); the mean of the two axes,
about 6,367.445 km (3,956.547 mi), can also be used.
Global mean radius of curvature
The global mean radius of curvature, averaged in all azimuths and at all points on the surface, is given by the areaweighted global mean Gaussian curvature:
For the WGS 84 ellipsoid, the mean curvature equals 6,370.994 km (3,958.752 mi).^{[citation needed]}
Topographical radii
The mathematical expressions above apply over the surface of the ellipsoid. The cases below considers Earth's topography, above or below a reference ellipsoid. As such, they are topographical geocentric distances, R_{t}, which depends not only on latitude.
Topographical extremes
 Maximum R_{t}: the summit of Chimborazo is 6,384.4 km (3,967.1 mi) from the Earth's center.
 Minimum R_{t}: the floor of the Arctic Ocean is approximately 6,352.8 km (3,947.4 mi) from the Earth's center.^{[14]}
Topographical global mean
The topographical mean geocentric distance averages elevations everywhere, resulting in a value 230 m larger than the IUGG mean radius, the authalic radius, or the volumetric radius. This topographical average is 6,371.230 km (3,958.899 mi) with uncertainty of 10 m (33 ft).^{[15]}
Derived quantities: diameter, circumference, arclength, area, volume
Earth's diameter is simply twice Earth's radius; for example, equatorial diameter (2a) and polar diameter (2b). For the WGS84 ellipsoid, that's respectively:
 2a=12,756.2740 km (7,926.3812 mi),
 2b=12,713.5046 km (7,899.8055 mi).
Earth's circumference equals the perimeter length. The equatorial circumference is simply the circle perimeter: C_{e}=2πa, in terms of the equatorial radius, a. The polar circumference equals C_{p}=4m_{p}, four times the quarter meridian m_{p}=aE(e), where the polar radius b enters via the eccentricity, e=(1b^{2}/a^{2})^{0.5}; see Ellipse#Circumference for details.
Arc length of more general surface curves, such as meridian arcs and geodesics, can also be derived from Earth's equatorial and polar radii.
Likewise for surface area, either based on a map projection or a geodesic polygon.
Earth's volume, or that of the reference ellipsoid, is V = 4/3πa^{2}b. Using the parameters from WGS84 ellipsoid of revolution, a = 6,378.137 km and b = 6,356.7523142km, V = 1.08321×10^{12} km^{3} (2.5988×10^{11} cu mi).^{[16]}
Published values
This table summarizes the accepted values of the Earth's radius.
Agency  Description  Value (in meters)  Ref 

IAU  nominal "zero tide" equatorial  6378100  ^{[1]} 
IAU  nominal "zero tide" polar  6356800  ^{[1]} 
IUGG  equatorial radius  6378137  ^{[2]} 
IUGG  semiminor axis (b)  6356752.3141  ^{[2]} 
IUGG  polar radius of curvature (c)  6399593.6259  ^{[2]} 
IUGG  mean radius (R_{1})  6371008.7714  ^{[2]} 
IUGG  radius of sphere of same surface (R_{2})  6371007.1810  ^{[2]} 
IUGG  radius of sphere of same volume (R_{3})  6371000.7900  ^{[2]} 
IERS  WGS84 ellipsoid, semimajor axis (a)  6378137.0  ^{[6]} 
IERS  WGS84 ellipsoid, semiminor axis (b)  6356752.3142  ^{[6]} 
IERS  WGS84 first eccentricity squared (e^{2})  0.00669437999014  ^{[6]} 
IERS  WGS84 ellipsoid, polar radius of curvature (c)  6399593.6258  ^{[6]} 
IERS  WGS84 ellipsoid, Mean radius of semiaxes (R_{1})  6371008.7714  ^{[6]} 
IERS  WGS84 ellipsoid, Radius of Sphere of Equal Area (R_{2})  6371007.1809  ^{[6]} 
IERS  WGS84 ellipsoid, Radius of Sphere of Equal Volume (R_{3})  6371000.7900  ^{[6]} 
GRS 80 semimajor axis (a)  6378137.0  
GRS 80 semiminor axis (b)  ≈6356752.314140  
Spherical Earth Approx. of Radius (R_{E})  6366707.0195  ^{[17]}  
meridional radius of curvature at the equator  6335439  
Maximum (the summit of Chimborazo)  6384400  ^{[14]}  
Minimum (the floor of the Arctic Ocean)  6352800  ^{[14]}  
Average distance from center to surface  6371230±10  ^{[15]} 
History
The first published reference to the Earth's size appeared around 350 BC, when Aristotle reported in his book On the Heavens^{[18]} that mathematicians had guessed the circumference of the Earth to be 400,000 stadia. Scholars have interpreted Aristotle's figure to be anywhere from highly accurate^{[19]} to almost double the true value.^{[20]} The first known scientific measurement and calculation of the circumference of the Earth was performed by Eratosthenes in about 240 BC. Estimates of the accuracy of Eratosthenes's measurement range from 0.5% to 17%.^{[21]} For both Aristotle and Eratosthenes, uncertainty in the accuracy of their estimates is due to modern uncertainty over which stadion length they meant.
See also
Notes
 ^ For details see figure of the Earth, geoid, and Earth tide.
 ^ There is no single center to the geoid; it varies according to local geodetic conditions.
 ^ In a geocentric ellipsoid, the center of the ellipsoid coincides with some computed center of Earth, and best models the earth as a whole. Geodetic ellipsoids are better suited to regional idiosyncrasies of the geoid. A partial surface of an ellipsoid gets fitted to the region, in which case the center and orientation of the ellipsoid generally do not coincide with the earth's center of mass or axis of rotation.
 ^ The value of the radius is completely dependent upon the latitude in the case of an ellipsoid model, and nearly so on the geoid.
 ^ This follows from the International Astronomical Union definition rule (2): a planet assumes a shape due to hydrostatic equilibrium where gravity and centrifugal forces are nearly balanced.^{[3]}
 ^ East–west directions can be misleading. Point B, which appears due east from A, will be closer to the equator than A. Thus the curvature found this way is smaller than the curvature of a circle of constant latitude, except at the equator. West can be exchanged for east in this discussion.
 ^ N is defined as the radius of curvature in the plane that is normal to both the surface of the ellipsoid at, and the meridian passing through, the specific point of interest.
References
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} ^{f} Mamajek, E. E; Prsa, A; Torres, G; et al. (2015). "IAU 2015 Resolution B3 on Recommended Nominal Conversion Constants for Selected Solar and Planetary Properties". arXiv:1510.07674 [astroph.SR].
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} ^{f} ^{g} ^{h} ^{i} ^{j} Moritz, H. (1980). Geodetic Reference System 1980, by resolution of the XVII General Assembly of the IUGG in Canberra.
 ^ IAU 2006 General Assembly: Result of the IAU Resolution votes Archived 20061107 at the Wayback Machine
 ^ Satellites Reveal A Mystery Of Large Change In Earth's Gravity Field , Aug. 1, 2002, Goddard Space Flight Center. Archived April 28, 2010, at the Wayback Machine
 ^ NASA's Grace Finds Greenland Melting Faster, 'Sees' Sumatra Quake, December 20, 2005, Goddard Space Flight Center.
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} ^{f} ^{g} ^{h} ^{i} "WGS84RPT.tif:Corel PHOTOPAINT" (PDF). Retrieved 20181017.
 ^ "Info" (PDF). earthinfo.nga.mil.
 ^ "Equatorial Radius of the Earth". Numerical Standards for Fundamental Astronomy: Astronomical Constants : Current Best Estimates (CBEs). IAU Division I Working Group. 2012. Archived from the original on 20160826. Retrieved 20160810.
 ^ Bowring, B. R. (October 1987). "Notes on the curvature in the prime vertical section". Survey Review. 29 (226): 195–196. doi:10.1179/sre.1987.29.226.195.
 ^ ^{a} ^{b} ^{c} Lass, Harry (1950). Vector and Tensor Analysis. McGraw Hill Book Company, Inc. pp. 71–77.
 ^ ^{a} ^{b} ^{c} Torge, Wolfgang (2001). Geodesy. ISBN 9783110170726.
 ^ ^{a} ^{b} ^{c} Moritz, H. (March 2000). "Geodetic Reference System 1980". Journal of Geodesy. 74 (1): 128–133. Bibcode:2000JGeod..74..128.. doi:10.1007/s001900050278. S2CID 195290884.
 ^ ^{a} ^{b} Snyder, J.P. (1987). Map Projections – A Working Manual (US Geological Survey Professional Paper 1395) p. 16–17. Washington D.C: United States Government Printing Office.
 ^ ^{a} ^{b} ^{c} "DiscoverTheWorld.com – Guam – POINTS OF INTEREST – Don't Miss – Mariana Trench". Guam.discovertheworld.com. 19600123. Archived from the original on 20120910. Retrieved 20130916.
 ^ ^{a} ^{b} Frédéric Chambat; Bernard Valette (2001). "Mean radius, mass, and inertia for reference Earth models" (PDF). Physics of the Earth and Planetary Interiors. 124 (3–4): 234–253. Bibcode:2001PEPI..124..237C. doi:10.1016/S00319201(01)00200X. Retrieved 18 November 2017.
 ^ Williams, David R. (20040901), Earth Fact Sheet, NASA, retrieved 20070317
 ^ Phillips, Warren (2004). Mechanics of Flight. John Wiley & Sons, Inc. p. 923. ISBN 0471334588.
 ^ Aristotle. On the Heavens. Book II 298 B. Retrieved 5 November 2017.
 ^ Drummond, William (1817). "On the Science of the Egyptians and Chaldeans, Part I". The Classical Journal. 16: 159.
 ^ "Figure of the Earth". Encyclopædia Britannica. 1911.
 ^ "Eratosthenes, the Greek Scientist". Encyclopædia Britannica. 2016.
External links
 Merrifield, Michael R. (2010). " The Earth's Radius (and exoplanets)". Sixty Symbols. Brady Haran for the University of Nottingham.