In linear algebra, a diagonal matrix is a matrix in which the entries outside the main diagonal are all zero; the term usually refers to square matrices. Elements of the main diagonal can either be zero or nonzero. An example of a 2×2 diagonal matrix is , while an example of a 3×3 diagonal matrix is. An identity matrix of any size, or any multiple of it (a scalar matrix), is a diagonal matrix.
A diagonal matrix is sometimes called a scaling matrix, since matrix multiplication with it results in changing scale (size). Its determinant is the product of its diagonal values.
As stated above, a diagonal matrix is a matrix in which all off-diagonal entries are zero. That is, the matrix D = (di,j) with n columns and n rows is diagonal if
However, the main diagonal entries are unrestricted.
The term diagonal matrix may sometimes refer to a rectangular diagonal matrix, which is an m-by-n matrix with all the entries not of the form di,i being zero. For example:
More often, however, diagonal matrix refers to square matrices, which can be specified explicitly as a square diagonal matrix. A square diagonal matrix is a symmetric matrix, so this can also be called a symmetric diagonal matrix.
The following matrix is square diagonal matrix:
In the remainder of this article we will consider only square diagonal matrices, and refer to them simply as "diagonal matrices".
This section may be confusing or unclear to readers. In particular, many sentences use incorrect, awkward grammar and should be reworded to make sense. (February 2021)
A diagonal matrix with equal diagonal entries is a scalar matrix; that is, a scalar multiple λ of the identity matrix I. Its effect on a vector is scalar multiplication by λ. For example, a 3×3 scalar matrix has the form:
The scalar matrices are the center of the algebra of matrices: that is, they are precisely the matrices that commute with all other square matrices of the same size.[a] By contrast, over a field (like the real numbers), a diagonal matrix with all diagonal elements distinct only commutes with diagonal matrices (its centralizer is the set of diagonal matrices). That is because if a diagonal matrix has then given a matrix with the term of the products are: and and (since one can divide by ), so they do not commute unless the off-diagonal terms are zero.[b] Diagonal matrices where the diagonal entries are not all equal or all distinct have centralizers intermediate between the whole space and only diagonal matrices.
For an abstract vector space V (rather than the concrete vector space ), the analog of scalar matrices are scalar transformations. This is true more generally for a module M over a ring R, with the endomorphism algebra End(M) (algebra of linear operators on M) replacing the algebra of matrices. Formally, scalar multiplication is a linear map, inducing a map (from a scalar λ to its corresponding scalar transformation, multiplication by λ) exhibiting End(M) as a R-algebra. For vector spaces, the scalar transforms are exactly the center of the endomorphism algebra, and, similarly, invertible transforms are the center of the general linear group GL(V). The former is more generally true free modules , for which the endomorphism algebra is isomorphic to a matrix algebra.
Multiplying a vector by a diagonal matrix multiplies each of the terms by the corresponding diagonal entry. Given a diagonal matrix and a vector , the product is:
This can be expressed more compactly by using a vector instead of a diagonal matrix, , and taking the Hadamard product of the vectors (entrywise product), denoted :
This is mathematically equivalent, but avoids storing all the zero terms of this sparse matrix. This product is thus used in machine learning, such as computing products of derivatives in backpropagation or multiplying IDF weights in TF-IDF, since some BLAS frameworks, which multiply matrices efficiently, do not include Hadamard product capability directly.
The operations of matrix addition and matrix multiplication are especially simple for diagonal matrices. Write diag(a1, ..., an) for a diagonal matrix whose diagonal entries starting in the upper left corner are a1, ..., an. Then, for addition, we have
- diag(a1, ..., an) + diag(b1, ..., bn) = diag(a1 + b1, ..., an + bn)
and for matrix multiplication,
- diag(a1, ..., an) diag(b1, ..., bn) = diag(a1b1, ..., anbn).
- diag(a1, ..., an)−1 = diag(a1−1, ..., an−1).
In particular, the diagonal matrices form a subring of the ring of all n-by-n matrices.
Multiplying an n-by-n matrix A from the left with diag(a1, ..., an) amounts to multiplying the ith row of A by ai for all i; multiplying the matrix A from the right with diag(a1, ..., an) amounts to multiplying the ith column of A by ai for all i.
Operator matrix in eigenbasis
As explained in determining coefficients of operator matrix, there is a special basis, e1, …, en, for which the matrix takes the diagonal form. Hence, in the defining equation , all coefficients with i ≠ j are zero, leaving only one term per sum. The surviving diagonal elements, , are known as eigenvalues and designated with in the equation, which reduces to . The resulting equation is known as eigenvalue equation and used to derive the characteristic polynomial and, further, eigenvalues and eigenvectors.
- The determinant of diag(a1, ..., an) is the product a1⋯an.
- The adjugate of a diagonal matrix is again diagonal.
- Where all matrices are square,
- The identity matrix In and zero matrix are diagonal.
- A 1×1 matrix is always diagonal.
Diagonal matrices occur in many areas of linear algebra. Because of the simple description of the matrix operation and eigenvalues/eigenvectors given above, it is typically desirable to represent a given matrix or linear map by a diagonal matrix.
In fact, a given n-by-n matrix A is similar to a diagonal matrix (meaning that there is a matrix X such that X−1AX is diagonal) if and only if it has n linearly independent eigenvectors. Such matrices are said to be diagonalizable.
Over the field of real or complex numbers, more is true. The spectral theorem says that every normal matrix is unitarily similar to a diagonal matrix (if AA∗ = A∗A then there exists a unitary matrix U such that UAU∗ is diagonal). Furthermore, the singular value decomposition implies that for any matrix A, there exist unitary matrices U and V such that UAV∗ is diagonal with positive entries.
In operator theory, particularly the study of PDEs, operators are particularly easy to understand and PDEs easy to solve if the operator is diagonal with respect to the basis with which one is working; this corresponds to a separable partial differential equation. Therefore, a key technique to understanding operators is a change of coordinates—in the language of operators, an integral transform—which changes the basis to an eigenbasis of eigenfunctions: which makes the equation separable. An important example of this is the Fourier transform, which diagonalizes constant coefficient differentiation operators (or more generally translation invariant operators), such as the Laplacian operator, say, in the heat equation.
Especially easy are multiplication operators, which are defined as multiplication by (the values of) a fixed function–the values of the function at each point correspond to the diagonal entries of a matrix.
- Proof: given the elementary matrix , is the matrix with only the i-th row of M and is the square matrix with only the M j-th column, so the non-diagonal entries must be zero, and the ith diagonal entry much equal the jth diagonal entry.
- Over more general rings, this does not hold, because one cannot always divide.
- "Do Diagonal Matrices Always Commute?". Stack Exchange. March 15, 2016. Retrieved August 4, 2018.
- Sahami, Mehran (2009-06-15). Text Mining: Classification, Clustering, and Applications. CRC Press. p. 14. ISBN 9781420059458.
- "Element-wise vector-vector multiplication in BLAS?". stackoverflow.com. 2011-10-01. Retrieved 2020-08-30.
- Nearing, James (2010). "Chapter 7.9: Eigenvalues and Eigenvectors" (PDF). Mathematical Tools for Physics. ISBN 048648212X. Retrieved January 1, 2012.