A cyclotron is a type of particle accelerator invented by Ernest O. Lawrence in 1929–1930 at the University of California, Berkeley, and patented in 1932. A cyclotron accelerates charged particles outwards from the center of a flat cylindrical vacuum chamber along a spiral path. The particles are held to a spiral trajectory by a static magnetic field and accelerated by a rapidly varying (radio frequency) electric field. Lawrence was awarded the 1939 Nobel Prize in Physics for this invention.
Cyclotrons were the most powerful particle accelerator technology until the 1950s when they were superseded by the synchrotron, and are still used to produce particle beams in physics and nuclear medicine. The largest single-magnet cyclotron was the 4.67 m (184 in) synchrocyclotron built between 1940 and 1946 by Lawrence at the University of California, Berkeley, which could accelerate protons to 730 mega electron volts (MeV). The largest cyclotron of its kind is the 17.1 m (56 ft) multimagnet TRIUMF accelerator at the University of British Columbia in Vancouver, British Columbia, which can produce 520 MeV protons.
In 1928 Hungarian physicist Leo Szilárd invented and patented the linear accelerator. In January 1929, Szilárd became the first person to discuss the resonance condition (what is now called the cyclotron frequency) for a circular accelerating apparatus, in a patent application in Germany. He also invented and patented the first cyclotron and betatron too. A couple months later, in the early summer of 1929, Ernest Lawrence came up with the cyclotron idea when he read a paper by Rolf Widerøe describing a drift tube linac. He published a paper in Science in 1930, and patented the device in 1932. He used large electromagnets recycled from obsolete Poulsen arc radio transmitters provided by the Federal Telegraph Company. A graduate student, M. Stanley Livingston, did much of the work of translating the idea into working hardware. At the Radiation Laboratory of the University of California, Berkeley, Lawrence and his collaborators constructed a series of cyclotrons which were the most powerful accelerators in the world at the time; a 69 cm (27 in) 4.8 MeV machine (1932), a 94 cm (37 in) 8 MeV machine (1937), and a 152 cm (60 in) 16 MeV machine (1939). He also developed a 467 cm (184 in), 730 MeV synchrocyclotron (1945). Lawrence received the 1939 Nobel Prize in Physics for the invention and development of the cyclotron and for results obtained with it.
The first European cyclotron was constructed in Leningrad (then Soviet Union) in the physics department of the Radium Institute, headed by Vitaly Khlopin. This Leningrad instrument was first proposed in 1932 by George Gamow and Lev Mysovskii and was installed and became operative by 1937. In Nazi Germany a cyclotron was built in Heidelberg under supervision of Walther Bothe and Wolfgang Gentner, with support from the Heereswaffenamt, and became operative in 1943.
Principle of operation
A cyclotron accelerates a charged particle beam using a high frequency alternating voltage which is applied between two hollow "D"-shaped sheet metal electrodes called "dees" inside a vacuum chamber. The dees are placed face to face with a narrow gap between them, creating a cylindrical space within them for the particles to move. The particles are injected into the center of this space. The dees are located between the poles of a large electromagnet which applies a static magnetic field B perpendicular to the electrode plane. The magnetic field causes the particles' path to bend in a circle due to the Lorentz force perpendicular to their direction of motion.
If the particles' speeds were constant, they would travel in a circular path within the dees under the influence of the magnetic field. However a radio frequency (RF) alternating voltage of several thousand volts is applied between the dees. The voltage creates an oscillating electric field in the gap between the dees that accelerates the particles. The frequency is set so that the particles make one circuit during a single cycle of the voltage. To achieve this, the frequency must match the particle's cyclotron resonance frequency
where B is the magnetic field strength, q is the electric charge of the particle and m is the relativistic mass of the charged particle. Each time after the particles pass to the other dee electrode the polarity of the RF voltage reverses. Therefore, each time the particles cross the gap from one dee electrode to the other, the electric field is in the correct direction to accelerate them. The particles' increasing speed due to these pushes causes them to move in a larger radius circle with each rotation, so the particles move in a spiral path outward from the center to the rim of the dees. When they reach the rim a small voltage on a metal plate deflects the beam so it exits the dees through a small gap between them, and hits a target located at the exit point at the rim of the chamber, or leaves the cyclotron through an evacuated beam tube to hit a remote target. Various materials may be used for the target, and the nuclear reactions due to the collisions will create secondary particles which may be guided outside of the cyclotron and into instruments for analysis.
The cyclotron was the first "cyclical" accelerator. The advantage of the cyclotron design over the existing electrostatic accelerators of the time such as the Cockcroft-Walton accelerator and Van de Graaff generator, was that in these machines the particles were only accelerated once by the voltage, so the particles' energy was equal to the accelerating voltage on the machine, which was limited by air breakdown to a few million volts. In the cyclotron, in contrast, the particles encounter the accelerating voltage many times during their spiral path, and so are accelerated many times, so the output energy can be many times the accelerating voltage.
Since the particles in a cyclotron are accelerated by the voltage many times, the final energy of the particles is not dependent on the accelerating voltage but on the strength of the magnetic field and the diameter of the accelerating chamber, the dees. Cyclotrons can only accelerate particles to speeds much slower than the speed of light, nonrelativistic speeds. For nonrelativistic particles, the centripetal force required to keep them in their curved path is
where is the particle's mass, its velocity, and is the radius of the path. This force is provided by the Lorentz force of the magnetic field
where is the particle's charge. The particles reach their maximum energy at the periphery of the dees, where the radius of their path is the radius of the dees. Equating these two forces
So the output energy of the particles is
Therefore, the limit to the cyclotron's output energy for a given type of particle is the strength of the magnetic field , which is limited to about 2 T for ferromagnetic electromagnets, and the radius of the dees , which is determined by the diameter of the magnet's pole pieces. So very large magnets were constructed for cyclotrons, culminating in Lawrence's 1946 synchrocyclotron, which had pole pieces 4.67 m (184 in) (15.3 feet) in diameter.
The cyclotron has evolved in a number of different forms
- Classic cyclotron - The first type of cyclotron, described in previous sections, which had uniform magnetic field and constant frequency, is mostly obsolete. It was limited to completely nonrelativistic energies (the output energy small compared to the particle's rest energy), and had focusing problems.
- Synchrocyclotron - an obsolete machine which extended energies into the relativistic regime by decreasing the radio frequency of the oscillator as the orbit of the particle got larger to keep it in synchronism with the particle. This was the most powerful accelerator during the 1950s, before the synchrotron. It operated in pulses, instead of continuously, so its luminosity (beam current) was very low.
- Isochronous cyclotron (isocyclotron) - a category which includes most current machines, extends output energy into the relativistic regime by using shaped pole pieces to create a nonuniform magnetic field stronger in peripheral regions to increase centripetal force on the particle as it gains relativistic mass, with alternating-gradient focusing to keep the beam focused.
- "Sector focused", "spiral-ridged", "azimuthally-varying-field" - these describe machines in which the pole surfaces have hills and valleys azimuthally, making the field increase and decrease as the particles move in the ring, which keeps the beam collimated by alternating-gradient focusing.
- Separated sector cyclotron - a machine in which the magnet is in separate sections, separated by gaps without field
- H− cyclotron - a cyclotron that accelerates negative hydrogen ions, which make it easy to deflect the beam out of the machine. At the beam exit point at the periphery of the dees, a metal foil strips the electrons from the hydrogen ions, transforming them into positively charged H+ ions. These are bent in the opposite direction by the magnet, so the beam leaves the machine.
In the non-relativistic approximation, the cyclotron frequency does not depend upon the particle's speed or the radius of the particle's orbit. As the beam spirals outward, the rotation frequency stays constant, and the beam continues to accelerate as it travels a greater distance in the same time period.
In contrast to this approximation, as particles approach the speed of light, the cyclotron frequency decreases proportionally to the particle's Lorentz factor. A rigorous proof of this fact (starting from Newton's second law) is given here: Relativistic mechanics#Force. Acceleration of relativistic particles therefore requires either modification to the frequency during the acceleration, leading to the synchrocyclotron, or modification to the magnetic field during the acceleration, which leads to the isochronous cyclotron. The relativistic mass can be rewritten as
The relativistic cyclotron frequency and angular frequency can be rewritten as
- , and
- would be the cyclotron frequency in classical approximation,
- would be the cyclotron angular frequency in classical approximation.
The gyroradius for a particle moving in a static magnetic field is then given by
where v would be the (linear) velocity.
A synchrocyclotron is a cyclotron in which the frequency of the driving RF electric field is varied to compensate for relativistic effects as the particles' velocity begins to approach the speed of light. This is in contrast to the classical cyclotron, where the frequency was held constant, thus leading to the synchrocyclotron operation frequency being
where is the classical cyclotron frequency and again is the relative velocity of the particle beam. The rest mass of an electron is 511 keV/c2, so the frequency correction is 1% for a magnetic vacuum tube with a 5.11 kV direct current accelerating voltage. The proton mass is nearly two thousand times the electron mass, so the 1% correction energy is about 9 MeV, which is sufficient to induce nuclear reactions.
An alternative to the synchrocyclotron is the isochronous cyclotron, which has a magnetic field that increases with radius, rather than with time. Isochronous cyclotrons are capable of producing much greater beam current than synchrocyclotrons, but require azimuthal variations in the field strength to provide a strong focusing effect and keep the particles captured in their spiral trajectory. For this reason, an isochronous cyclotron is also called an "AVF (azimuthal varying field) cyclotron". This solution for focusing the particle beam was proposed by L. H. Thomas in 1938. Recalling the relativistic gyroradius and the relativistic cyclotron frequency , one can choose to be proportional to the Lorentz factor, . This results in the relation which again only depends on the velocity , like in the non-relativistic case. Also, the cyclotron frequency is constant in this case.
The transverse de-focusing effect of this radial field gradient is compensated by ridges on the magnet faces which vary the field azimuthally as well. This allows particles to be accelerated continuously, on every period of the radio frequency (RF), rather than in bursts as in most other accelerator types. This principle that alternating field gradients have a net focusing effect is called strong focusing. It was obscurely known theoretically long before it was put into practice. Examples of isochronous cyclotrons abound; in fact almost all modern cyclotrons use azimuthally-varying fields. The TRIUMF cyclotron mentioned below is the largest of its kind with an outer orbit radius of 7.9 metres, extracting protons at up to 510 MeV, which is 3/4 of the speed of light. The PSI cyclotron reaches higher energy but is smaller because of using a higher magnetic field.
For several decades, cyclotrons were the best source of high-energy beams for nuclear physics experiments; several cyclotrons are still in use for this type of research. The results enable the calculation of various properties, such as the mean spacing between atoms and the creation of various collision products. Subsequent chemical and particle analysis of the target material may give insight into nuclear transmutation of the elements used in the target.
Cyclotrons can be used in particle therapy to treat cancer. Ion beams from cyclotrons can be used, as in proton therapy, to penetrate the body and kill tumors by radiation damage, while minimizing damage to healthy tissue along their path. Cyclotron beams can be used to bombard other atoms to produce short-lived positron-emitting isotopes suitable for PET imaging. More recently some cyclotrons currently installed at hospitals for radio isotopes production have been retrofitted to enable them to produce technetium-99m. Technetium-99m is a diagnostic isotope in short supply due to difficulties at Canada's Chalk River facility.
Advantages and limitations
The cyclotron was an improvement over the linear accelerators (linacs) that were available when it was invented, being more cost- and space-effective due to the iterated interaction of the particles with the accelerating field. In the 1920s, it was not possible to generate the high power, high-frequency radio waves which are used in modern linacs (generated by klystrons). As such, impractically long linac structures were required for higher-energy particles. The compactness of the cyclotron reduces other costs as well, such as foundations, radiation shielding, and the enclosing building. Cyclotrons have a single electrical driver, which saves both money and power. Furthermore, cyclotrons are able to produce a continuous stream of particles at the target, so the average power passed from a particle beam into a target is relatively high.
The spiral path of the cyclotron beam can only "sync up" with klystron-type (constant frequency) voltage sources if the accelerated particles are approximately obeying Newton's laws of motion. If the particles become fast enough that relativistic effects become important, the beam becomes out of phase with the oscillating electric field, and cannot receive any additional acceleration. The classical cyclotron is therefore only capable of accelerating particles up to a few percent of the speed of light. To accommodate increased mass the magnetic field may be modified by appropriately shaping the pole pieces as in the isochronous cyclotrons, operating in a pulsed mode and changing the frequency applied to the dees as in the synchrocyclotrons, either of which is limited by the diminishing cost effectiveness of making larger machines. Cost limitations have been overcome by employing the more complex synchrotron or modern, klystron-driven linear accelerators, both of which have the advantage of scalability, offering more power within an improved cost structure as the machines are made larger.
One of the world's largest cyclotrons is at the RIKEN laboratory in Japan. Called the SRC or Superconducting Ring Cyclotron, it has six separated superconducting sectors, and is 19 m in diameter and 8 m high. Built to accelerate heavy ions, its maximum magnetic field is 3.8 T, yielding a bending ability of 8 T·m. The total weight of the cyclotron is 8,300 t. The Riken magnetic field covers from 3.5 m radius to 5.5 m with the maximum beam radius of about 5 m (200 in). It has accelerated uranium ions to 345 MeV per atomic mass unit.
TRIUMF, Canada's national laboratory for nuclear and particle physics, houses the world's largest cyclotron of its kind. The 18 m diameter, 4,000 t main magnet produces a field of 0.46 T while a 23 MHz 94 kV electric field is used to accelerate the 300 μA beam. The TRIUMF field goes from 0 to 813 cm (0 to 320 in) radius with the maximum beam radius of 790 cm (310 in). Its large size is partly a result of using negative hydrogen ions rather than protons; this requires a lower magnetic field to reduce EM stripping of the loosely bound electrons. The advantage is that extraction is simpler; multi-energy, multi-beams can be extracted by inserting thin carbon stripping foils at appropriate radii. TRIUMF is a non-profit incorporation with charitable status located at the University of British Columbia.
The spiraling of electrons in a cylindrical vacuum chamber within a transverse magnetic field is also employed in the magnetron, a device for producing high frequency radio waves (microwaves). The synchrotron moves the particles through a path of constant radius, allowing it to be made as a pipe and so of much larger radius than is practical with the cyclotron and synchrocyclotron. The larger radius allows the use of numerous magnets, each of which imparts angular momentum and so allows particles of higher velocity (mass) to be kept within the bounds of the evacuated pipe. The magnetic field strength of each of the bending magnets is increased as the particles gain energy in order to keep the bending angle constant.
The United States Department of War famously asked for dailies of the Superman comic strip to be pulled in April 1945 for having Superman bombarded with the radiation from a cyclotron. In 1950, however, in Atom Man vs. Superman, Lex Luthor uses a cyclotron to start an earthquake.
- "Ernest Lawrence's Cyclotron". www2.lbl.gov. Retrieved 2018-04-06.
- "Ernest Lawrence - Biographical". nobelprize.org. Retrieved 2018-04-06.
- U.S. Patent 1,948,384 Lawrence, Ernest O. Method and apparatus for the acceleration of ions, filed: January 26, 1932, granted: February 20, 1934
- Lawrence, Earnest O.; Livingston, M. Stanley (April 1, 1932). "The Production of High Speed Light Ions Without the Use of High Voltages". Physical Review. American Physical Society. 40 (1): 19–35. Bibcode:1932PhRv...40...19L. doi:10.1103/PhysRev.40.19.
- Close, F. E.; Close, Frank; Marten, Michael; et al. (2004). The Particle Odyssey: A Journey to the Heart of Matter. Oxford University Press. pp. 84–87. Bibcode:2002pojh.book.....C. ISBN 978-0-19-860943-8.
- "Ernest Lawrence - Facts". nobelprize.org. Retrieved 2018-04-06.
- "MEDraysintell identifies close to 1,500 medical cyclotrons worldwide". ITN Imaging Technology News. March 10, 2020.
- Gene Dannen: Szilard’s Inventions Patently Halted. LINK
- Telegdi, Valentine L. (2000). "Szilard as Inventor: Accelerators and More". Physics Today. 53 (10): 25–28. Bibcode:2000PhT....53j..25T. doi:10.1063/1.1325189. LINK: 
- Widerøe, R. (1928). "Ueber Ein Neues Prinzip Zur Herstellung Hoher Spannungen". Archiv für Elektronik und Übertragungstechnik (in German). 21 (4): 387–406. doi:10.1007/BF01656341. S2CID 109942448.
- "Breaking Through: A Century of Physics at Berkeley 1886–1968 2. The Cyclotron". Bancroft Library, UC Berkeley. 8 December 2008. Archived from the original on 2012-05-27.
- Livingston, M. Stanley (19–22 August 1975). "The History of the Cyclotron" (PDF). Proceedings of the 7th International Conference on Cyclotrons and their Applications. Zurich, Switzerland. pp. 635–638.CS1 maint: date format (link)
- E. O. Lawrence; N. E. Edlefsen (1930). Science. 72: 376. Missing or empty
- Alonso, M.; Finn, E. (1992). Physics. Addison Wesley. ISBN 978-0-201-56518-8.
- F.J. Mann, "Federal Telephone and Radio Corporation, A Historical Review: 1909-1946," Electrical Communications Vol. 23, No. 4 (December 1946): 397-398.
- "Ernest Lawrence and M. Stanley Livingston". University of California, Berkeley.
- "The Nobel Prize in Physics 1939". Nobel Foundation. Archived from the original on 24 October 2008. Retrieved 9 October 2008.
- Emelyanov, V. S. (1971). "Nuclear Energy in the Soviet Union". Bulletin of the Atomic Scientists. 27 (9): 39. Bibcode:1971BuAtS..27i..38E. doi:10.1080/00963402.1971.11455411.
State Institute of Radium, founded in 1922, now known as V. G. Khlopin Radium Institute
- "History / Memorial". V.G. Khlopin Radium Institute. Archived from the original on 2011-04-26. Retrieved February 25, 2012.
- "History / Chronology". Archived from the original on 2011-04-26. Retrieved February 25, 2012.
- Ulrich Schmidt-Rohr. "Wolfgang Gentner 1906-1980" (in German). Archived from the original on 6 July 2007.
- Singh, Kongbam Chandramani (2009). Basic Physics. New Delhi: PHI Learning Private Ltd. pp. 211–212. ISBN 978-8120337084.
- Wiedemann, Helmut (2013). Particle Accelerator Physics: Basic Principles and Linear Beam Dynamics. Springer Science and Business Media. pp. 65–67. ISBN 9783662029039.
- Cherry, Simon R.; Sorenson, James A.; Phelps, Michael E. (2012). Physics in Nuclear Medicine. Elsevier Health Sciences. pp. 47–48. ISBN 9781416051985.
- Serway, Raymond A.; Jewett, John W. (2012). Principles of Physics: A Calculus-Based Text, Vol. 2 (5 ed.). Cengage Learning. p. 753. ISBN 9781133712749.
- Chao, Alex (1999). Handbook of Accelerator Physics and Engineering. World Scientific. pp. 13–15. ISBN 9789810235000.
- Lee, S.-Y. (1999). Accelerator physics. World Scientific. p. 14. ISBN 978-981-02-3709-7.
- Thomas, L. H. (1938). "The Paths of Ions in the Cyclotron I. Orbits in the Magnetic Field". Physical Review. 54 (8): 580–588. Bibcode:1938PhRv...54..580T. doi:10.1103/PhysRev.54.580.
- Hume, M. (21 February 2012). "In a breakthrough, Canadian researchers develop a new way to produce medical isotopes". The Globe and Mail. Vancouver.
- Kamigaito, O.; et al. (2010). "Status of RIBF accelerators RIKEN" (PDF). Proceedings of the 19th International Conference on Cyclotrons and their Applications.
- "Largest cyclotron". guinnessworldrecords.com.
- "Canadian University Partners & Owners".
- Laurence Maslon; Michael Kantor. Superheroes!:Capes cowls and the creation of comic book culture. p. 91.
- Chao, Alexander W.; et al. (2013). Handbook of Accelerator Physics and Engineering (2nd ed.). World Scientific. doi:10.1142/8543. ISBN 978-981-4417-17-4.
- Feder, T. (2004). "Building a Cyclotron on a Shoestring". Physics Today. 57 (11): 30–31. Bibcode:2004PhT....57k..30F. doi:10.1063/1.1839371. S2CID 109712952.
- Jardin, X. (12 Jan 2005). "The Cyclotron Comes to the 'Hood". Wired. About a neighborhood cyclotron in Anchorage, Alaska.CS1 maint: postscript (link)
- Niell, F. M. (2005). "Resonance Mapping and the Cyclotron". Archived from the original on 2009-05-05. Retrieved 2005-05-27. An experiment done by Fred M. Niell, III his senior year of high school (1994–95) with which he won the overall grand prize in the ISEF.CS1 maint: postscript (link)
|Wikimedia Commons has media related to Cyclotrons.|
- The 88-Inch Cyclotron at Lawrence Berkeley National Laboratory
- The first Cyclotron in Amsterdam, Netherlands (1964), at the site of the Free University
- National Superconducting Cyclotron Laboratory of the Michigan State University—Home of coupled K500 and K1200 cyclotrons; the K500, the first superconducting cyclotron, and the K1200, formerly the most powerful in the world.
- Rutgers Cyclotron—Students at Rutgers University built a 30 cm (12 in) 1 MeV cyclotron as an undergraduate project, which is now used for a senior-level undergraduate and a graduate lab course.
- RIKEN Nishina Center for Accelerator-based Science—Home of the most powerful cyclotron in the world