In mathematics, the trigonometric functions (also called circular functions, angle functions or goniometric functions^{[1]}^{[2]}) are real functions which relate an angle of a rightangled triangle to ratios of two side lengths. They are widely used in all sciences that are related to geometry, such as navigation, solid mechanics, celestial mechanics, geodesy, and many others. They are among the simplest periodic functions, and as such are also widely used for studying periodic phenomena through Fourier analysis.
The trigonometric functions most widely used in modern mathematics are the sine, the cosine, and the tangent. Their reciprocals are respectively the cosecant, the secant, and the cotangent, which are less used. Each of these six trigonometric functions has a corresponding inverse function, and an analog among the hyperbolic functions.^{[3]}
The oldest definitions of trigonometric functions, related to rightangle triangles, define them only for acute angles. To extend these definitions to functions whose domain is the whole projectively extended real line, geometrical definitions using the standard unit circle (i.e., a circle with radius 1 unit) are often used. Modern definitions express trigonometric functions as infinite series or as solutions of differential equations. This allows extending the domain of sine and cosine functions to the whole complex plane, and the domain of the other trigonometric functions to the complex plane from which some isolated points are removed.
Rightangled triangle definitions
In this section, an uppercase letter denotes a vertex of a triangle and the measure of the corresponding angle; The lowercase form of the same letter denotes the opposite side of the triangle and its length. In the definitions that follow, θ corresponds to A in the diagram.
If the angle θ is given, then all sides of the rightangled triangle are welldefined up to a scaling factor. This means that the ratio of any two side lengths depends only on θ. Thus these six ratios define six functions of θ, which are the trigonometric functions. More precisely, the six trigonometric functions are:^{[4]}^{[5]}






In a rightangled triangle, the sum of the two acute angles is a right angle, that is, 90° or π/2 radians.
Function  Abbreviation  Description  Relationship  

using radians  using degrees  
sine  sin  opposite/hypotenuse  
cosine  cos  adjacent/hypotenuse  
tangent  tan (or tg)  opposite/adjacent  
cotangent  cot (or cotan or cotg or ctg or ctn)  adjacent/opposite  
secant  sec  hypotenuse/adjacent  
cosecant  csc (or cosec)  hypotenuse/opposite 
Radians versus degrees
In geometric applications, the argument of a trigonometric function is generally the measure of an angle. For this purpose, any angular unit is convenient, and angles are most commonly measured in conventional units of degrees in which a right angle is 90° and a complete turn is 360° (particularly in elementary mathematics).
However, in calculus and mathematical analysis, the trigonometric functions are generally regarded more abstractly as functions of real or Complex numbers, rather than angles. In fact, the functions sin and cos can be defined for all complex numbers in terms of the exponential function via power series^{[7]} or as solutions to Differential equations given particular initial values^{[8]} (see below), without reference to any geometric notions. The other four trigonometric functions (tan, cot, sec, csc) can be defined as quotients and reciprocals of sin and cos, except where zero occurs in the denominator. It can be proved, for real arguments, that these definitions coincide with elementary geometric definitions if the argument is regarded as an angle given in radians.^{[7]} Moreover, these definitions result in simple expressions for the Derivatives and indefinite integrals for the trigonometric functions.^{[9]} Thus, in settings beyond elementary geometry, radians are regarded as the mathematically natural unit for describing angle measures.
When Radians (rad) are employed, the angle is given as the length of the arc of the unit circle subtended by it: the angle that subtends an arc of length 1 on the unit circle is 1 rad (≈ 57.3°), and a complete turn (360°) is an angle of 2π (≈ 6.28) rad. For real number x, the notations sin x, cos x, etc. refer to the value of the trigonometric functions evaluated at an angle of x rad. If units of degrees are intended, the degree sign must be explicitly shown (e.g., sin x°, cos x°, etc.). Using this standard notation, the argument x for the trigonometric functions satisfies the relationship x = (180x/π)°, so that, for example, sin π = sin 180° when we take x = π. In this way, the degree symbol can be regarded as a mathematical constant such that 1° = π/180 ≈ 0.0175.
Unitcircle definitions
The six trigonometric functions can be defined as coordinate values of points on the Euclidean plane that are related to the unit circle, which is the circle of radius one centered at the origin O of this coordinate system. While rightangled triangle definitions allow for the definition of the trigonometric functions for angles between 0 and radian (90°), the unit circle definitions allow the domain of trigonometric functions to be extended to all positive and negative real numbers.
Let be the ray obtained by rotating by an angle θ the positive half of the xaxis (counterclockwise rotation for and clockwise rotation for ). This ray intersects the unit circle at the point The ray extended to a line if necessary, intersects the line of equation at point and the line of equation at point The tangent line to the unit circle at the point A, is perpendicular to and intersects the y and xaxes at points and The coordinates of these points give the values of all trigonometric functions for any arbitrary real value of θ in the following manner.
The trigonometric functions cos and sin are defined, respectively, as the x and ycoordinate values of point A. That is,
 and ^{[11]}
In the range , this definition coincides with the rightangled triangle definition, by taking the rightangled triangle to have the unit radius OA as hypotenuse. And since the equation holds for all points on the unit circle, this definition of cosine and sine also satisfies the Pythagorean identity
The other trigonometric functions can be found along the unit circle as
 and
 and
By applying the Pythagorean identity and geometric proof methods, these definitions can readily be shown to coincide with the definitions of tangent, cotangent, secant and cosecant in terms of sine and cosine, that is
Since a rotation of an angle of does not change the position or size of a shape, the points A, B, C, D, and E are the same for two angles whose difference is an integer multiple of . Thus trigonometric functions are periodic functions with period . That is, the equalities
 and
hold for any angle θ and any integer k. The same is true for the four other trigonometric functions. By observing the sign and the monotonicity of the functions sine, cosine, cosecant, and secant in the four quadrants, one can show that 2π is the smallest value for which they are periodic (i.e., 2π is the fundamental period of these functions). However, after a rotation by an angle , the points B and C already return to their original position, so that the tangent function and the cotangent function have a fundamental period of π. That is, the equalities
 and
hold for any angle θ and any integer k.
Algebraic values
The algebraic expressions for the most important angles are as follows:
Writing the numerators as square roots of consecutive nonnegative integers, with a denominator of 2, provides an easy way to remember the values.^{[12]}
Such simple expressions generally do not exist for other angles which are rational multiples of a right angle. For an angle which, measured in degrees, is a multiple of three, the sine and the cosine may be expressed in terms of square roots, see Trigonometric constants expressed in real radicals. These values of the sine and the cosine may thus be constructed by ruler and compass.
For an angle of an integer number of degrees, the sine and the cosine may be expressed in terms of square roots and the cube root of a nonreal complex number. Galois theory allows proving that, if the angle is not a multiple of 3°, nonreal cube roots are unavoidable.
For an angle which, measured in degrees, is a rational number, the sine and the cosine are algebraic numbers, which may be expressed in terms of nth roots. This results from the fact that the Galois groups of the cyclotomic polynomials are cyclic.
For an angle which, measured in degrees, is not a rational number, then either the angle or both the sine and the cosine are transcendental numbers. This is a corollary of Baker's theorem, proved in 1966.
Simple algebraic values
The following table summarizes the simplest algebraic values of trigonometric functions.^{[13]} The symbol represents the point at infinity on the projectively extended real line; it is not signed, because, when it appears in the table, the corresponding trigonometric function tends to on one side, and to on the other side, when the argument tends to the value in the table.
Radian Degree sin cos tan cot sec cosec 0° π/12 15° π/10 18° π/8 22.5° π/6 30° π/5 36° π/4 45° 3π/10 54° π/3 60° 3π/8 67.5° 2π/5 72° 5π/12 75° π/2 90°
In calculus
The modern trend in mathematics is to build geometry from calculus rather than the converse.^{[citation needed]} Therefore, except at a very elementary level, trigonometric functions are defined using the methods of calculus.
Trigonometric functions are differentiable and analytic at every point where they are defined; that is, everywhere for the sine and the cosine, and, for the tangent, everywhere except at π/2 + kπ for every integer k.
The trigonometric function are periodic functions, and their primitive period is 2π for the sine and the cosine, and π for the tangent, which is increasing in each open interval (π/2 + kπ, π/2 + (k + 1)π). At each end point of these intervals, the tangent function has a vertical asymptote.
In calculus, there are two equivalent definitions of trigonometric functions, either using power series or differential equations. These definitions are equivalent, as starting from one of them, it is easy to retrieve the other as a property. However the definition through differential equations is somehow more natural, since, for example, the choice of the coefficients of the power series may appear as quite arbitrary, and the Pythagorean identity is much easier to deduce from the differential equations.
Definition by differential equations
Sine and cosine can be defined as the unique solution to the initial value problem:
Differentiating again, and , so both sine and cosine are solutions of the ordinary differential equation
Applying the quotient rule to the tangent , we derive
Power series expansion
Applying the differential equations to power series with indeterminate coefficients, one may deduce recurrence relations for the coefficients of the Taylor series of the sine and cosine functions. These recurrence relations are easy to solve, and give the series expansions^{[14]}
The radius of convergence of these series is infinite. Therefore, the sine and the cosine can be extended to entire functions (also called "sine" and "cosine"), which are (by definition) complexvalued functions that are defined and holomorphic on the whole complex plane.
Being defined as fractions of entire functions, the other trigonometric functions may be extended to meromorphic functions, that is functions that are holomorphic in the whole complex plane, except some isolated points called poles. Here, the poles are the numbers of the form for the tangent and the secant, or for the cotangent and the cosecant, where k is an arbitrary integer.
Recurrences relations may also be computed for the coefficients of the Taylor series of the other trigonometric functions. These series have a finite radius of convergence. Their coefficients have a combinatorial interpretation: they enumerate alternating permutations of finite sets.^{[15]}
More precisely, defining
 U_{n}, the nth up/down number,
 B_{n}, the nth Bernoulli number, and
 E_{n}, is the nth Euler number,
one has the following series expansions:^{[16]}
Partial fraction expansion
There is a series representation as partial fraction expansion where just translated reciprocal functions are summed up, such that the poles of the cotangent function and the reciprocal functions match:^{[17]}
This identity can be proven with the Herglotz trick.^{[18]} Combining the (–n)th with the nth term lead to absolutely convergent series:
Similarly, one can find a partial fraction expansion for the secant, cosecant and tangent functions:
Infinite product expansion
The following infinite product for the sine is of great importance in complex analysis:
For the proof of this expansion, see Sine. From this, it can be deduced that
Relationship to exponential function (Euler's formula)
Euler's formula relates sine and cosine to the exponential function:
This formula is commonly considered for real values of x, but it remains true for all complex values.
Proof: Let and One has for j = 1, 2. The quotient rule implies thus that . Therefore, is a constant function, which equals 1, as This proves the formula.
One has
Solving this linear system in sine and cosine, one can express them in terms of the exponential function:
When x is real, this may be rewritten as
Most trigonometric identities can be proved by expressing trigonometric functions in terms of the complex exponential function by using above formulas, and then using the identity for simplifying the result.
Definitions using functional equations
One can also define the trigonometric functions using various functional equations.
For example,^{[19]} the sine and the cosine form the unique pair of continuous functions that satisfy the difference formula
and the added condition
In the complex plane
The sine and cosine of a complex number can be expressed in terms of real sines, cosines, and hyperbolic functions as follows:
By taking advantage of domain coloring, it is possible to graph the trigonometric functions as complexvalued functions. Various features unique to the complex functions can be seen from the graph; for example, the sine and cosine functions can be seen to be unbounded as the imaginary part of becomes larger (since the color white represents infinity), and the fact that the functions contain simple zeros or poles is apparent from the fact that the hue cycles around each zero or pole exactly once. Comparing these graphs with those of the corresponding Hyperbolic functions highlights the relationships between the two.
Basic identities
Many identities interrelate the trigonometric functions. This section contains the most basic ones; for more identities, see List of trigonometric identities. These identities may be proved geometrically from the unitcircle definitions or the rightangledtriangle definitions (although, for the latter definitions, care must be taken for angles that are not in the interval [0, π/2], see Proofs of trigonometric identities). For nongeometrical proofs using only tools of calculus, one may use directly the differential equations, in a way that is similar to that of the above proof of Euler's identity. One can also use Euler's identity for expressing all trigonometric functions in terms of complex exponentials and using properties of the exponential function.
Parity
The cosine and the secant are even functions; the other trigonometric functions are odd functions. That is:
Periods
All trigonometric functions are periodic functions of period 2π. This is the smallest period, except for the tangent and the cotangent, which have π as smallest period. This means that, for every integer k, one has
Pythagorean identity
The Pythagorean identity, is the expression of the Pythagorean theorem in terms of trigonometric functions. It is
Sum and difference formulas
The sum and difference formulas allow expanding the sine, the cosine, and the tangent of a sum or a difference of two angles in terms of sines and cosines and tangents of the angles themselves. These can be derived geometrically, using arguments that date to Ptolemy. One can also produce them algebraically using Euler's formula.
 Sum
 Difference
When the two angles are equal, the sum formulas reduce to simpler equations known as the doubleangle formulae.
These identities can be used to derive the producttosum identities.
By setting all trigonometric functions of can be expressed as rational fractions of :
Together with
this is the tangent halfangle substitution, which reduces the computation of integrals and antiderivatives of trigonometric functions to that of rational fractions.
Derivatives and antiderivatives
The derivatives of trigonometric functions result from those of sine and cosine by applying quotient rule. The values given for the antiderivatives in the following table can be verified by differentiating them. The number C is a constant of integration.
Alternatively, the derivatives of the 'cofunctions' can be obtained using trigonometric identities and the chain rule:
Inverse functions
The trigonometric functions are periodic, and hence not injective, so strictly speaking, they do not have an inverse function. However, on each interval on which a trigonometric function is monotonic, one can define an inverse function, and this defines inverse trigonometric functions as multivalued functions. To define a true inverse function, one must restrict the domain to an interval where the function is monotonic, and is thus bijective from this interval to its image by the function. The common choice for this interval, called the set of principal values, is given in the following table. As usual, the inverse trigonometric functions are denoted with the prefix "arc" before the name or its abbreviation of the function.
The notations sin^{−1}, cos^{−1}, etc. are often used for arcsin and arccos, etc. When this notation is used, inverse functions could be confused with multiplicative inverses. The notation with the "arc" prefix avoids such a confusion, though "arcsec" for arcsecant can be confused with "arcsecond".
Just like the sine and cosine, the inverse trigonometric functions can also be expressed in terms of infinite series. They can also be expressed in terms of complex logarithms.
Applications
Angles and sides of a triangle
In this sections A, B, C denote the three (interior) angles of a triangle, and a, b, c denote the lengths of the respective opposite edges. They are related by various formulas, which are named by the trigonometric functions they involve.
Law of sines
The law of sines states that for an arbitrary triangle with sides a, b, and c and angles opposite those sides A, B and C:
 ,
where Δ is the area of the triangle, or, equivalently,
 ,
where R is the triangle's circumradius.
It can be proven by dividing the triangle into two right ones and using the above definition of sine. The law of sines is useful for computing the lengths of the unknown sides in a triangle if two angles and one side are known. This is a common situation occurring in triangulation, a technique to determine unknown distances by measuring two angles and an accessible enclosed distance.
Law of cosines
The law of cosines (also known as the cosine formula or cosine rule) is an extension of the Pythagorean theorem:
 ,
or equivalently,
 .
In this formula the angle at C is opposite to the side c. This theorem can be proven by dividing the triangle into two right ones and using the Pythagorean theorem.
The law of cosines can be used to determine a side of a triangle if two sides and the angle between them are known. It can also be used to find the cosines of an angle (and consequently the angles themselves) if the lengths of all the sides are known.
Law of tangents
The following all form the law of tangents^{[20]}
 ;
 ;
 .
The explanation of the formulae in words would be cumbersome, but the patterns of sums and differences, for the lengths and corresponding opposite angles, are apparent in the theorem.
Law of cotangents
If
 (the radius of the inscribed circle for the triangle)
and
 (the semiperimeter for the triangle),
then the following all form the law of cotangents^{[20]}
 ;
 ;
 .
It follows that
 .
In words the theorem is: the cotangent of a halfangle equals the ratio of the semiperimeter minus the opposite side to the said angle, to the inradius for the triangle.
Periodic functions
The trigonometric functions are also important in physics. The sine and the cosine functions, for example, are used to describe simple harmonic motion, which models many natural phenomena, such as the movement of a mass attached to a spring and, for small angles, the pendular motion of a mass hanging by a string. The sine and cosine functions are onedimensional projections of uniform circular motion.
Trigonometric functions also prove to be useful in the study of general periodic functions. The characteristic wave patterns of periodic functions are useful for modeling recurring phenomena such as sound or light waves.^{[21]}
Under rather general conditions, a periodic function f(x) can be expressed as a sum of sine waves or cosine waves in a Fourier series.^{[22]} Denoting the sine or cosine basis functions by φ_{k}, the expansion of the periodic function f(t) takes the form:
For example, the square wave can be written as the Fourier series
In the animation of a square wave at top right it can be seen that just a few terms already produce a fairly good approximation. The superposition of several terms in the expansion of a sawtooth wave are shown underneath.
History
While the early study of trigonometry can be traced to antiquity, the trigonometric functions as they are in use today were developed in the medieval period. The chord function was discovered by Hipparchus of Nicaea (180–125 BCE) and Ptolemy of Roman Egypt (90–165 CE). The functions of sine and versine (1 – cosine) can be traced back to the jyā and kotijyā functions used in Gupta period Indian astronomy (Aryabhatiya, Surya Siddhanta), via translation from Sanskrit to Arabic and then from Arabic to Latin.^{[23]} (See Aryabhata's sine table.)
All six trigonometric functions in current use were known in Islamic mathematics by the 9th century, as was the law of sines, used in solving triangles.^{[24]} With the exception of the sine (which was adopted from Indian mathematics), the other five modern trigonometric functions were discovered by Persian and Arab mathematicians, including the cosine, tangent, cotangent, secant and cosecant.^{[24]} AlKhwārizmī (c. 780–850) produced tables of sines, cosines and tangents. Circa 830, Habash alHasib alMarwazi discovered the cotangent, and produced tables of tangents and cotangents.^{[25]}^{[26]} Muhammad ibn Jābir alHarrānī alBattānī (853–929) discovered the reciprocal functions of secant and cosecant, and produced the first table of cosecants for each degree from 1° to 90°.^{[26]} The trigonometric functions were later studied by mathematicians including Omar Khayyám, Bhāskara II, Nasir alDin alTusi, Jamshīd alKāshī (14th century), Ulugh Beg (14th century), Regiomontanus (1464), Rheticus, and Rheticus' student Valentinus Otho.
Madhava of Sangamagrama (c. 1400) made early strides in the analysis of trigonometric functions in terms of infinite series.^{[27]} (See Madhava series and Madhava's sine table.)
The terms tangent and secant were first introduced by the Danish mathematician Thomas Fincke in his book Geometria rotundi (1583).^{[28]}
The 17th century French mathematician Albert Girard made the first published use of the abbreviations sin, cos, and tan in his book Trigonométrie.^{[29]}
In a paper published in 1682, Leibniz proved that sin x is not an algebraic function of x.^{[30]} Though introduced as ratios of sides of a right triangle, and thus appearing to be rational functions, Leibnitz result established that they are actually transcendental functions of their argument. The task of assimilating circular functions into algebraic expressions was accomplished by Euler in his Introduction to the Analysis of the Infinite (1748). His method was to show that the sine and cosine functions are alternating series formed from the even and odd terms respectively of the exponential series. He presented "Euler's formula", as well as nearmodern abbreviations (sin., cos., tang., cot., sec., and cosec.).^{[23]}
A few functions were common historically, but are now seldom used, such as the chord, the versine (which appeared in the earliest tables^{[23]}), the coversine, the haversine,^{[31]} the exsecant and the excosecant. The list of trigonometric identities shows more relations between these functions.
 crd(θ) = 2 sin(θ/2)
 versin(θ) = 1 − cos(θ) = 2 sin^{2}(θ/2)
 coversin(θ) = 1 − sin(θ) = versin(π/2 − θ)
 haversin(θ) = 1/2versin(θ) = sin^{2}(θ/2)
 exsec(θ) = sec(θ) − 1
 excsc(θ) = exsec(π/2 − θ) = csc(θ) − 1
Etymology
The word sine derives^{[32]} from Latin sinus, meaning "bend; bay", and more specifically "the hanging fold of the upper part of a toga", "the bosom of a garment", which was chosen as the translation of what was interpreted as the Arabic word jaib, meaning "pocket" or "fold" in the twelfthcentury translations of works by AlBattani and alKhwārizmī into Medieval Latin.^{[33]} The choice was based on a misreading of the Arabic written form jyb (جيب), which itself originated as a transliteration from Sanskrit jīvā, which along with its synonym jyā (the standard Sanskrit term for the sine) translates to "bowstring", being in turn adopted from Ancient Greek χορδή "string".^{[34]}
The word tangent comes from Latin tangens meaning "touching", since the line touches the circle of unit radius, whereas secant stems from Latin secans—"cutting"—since the line cuts the circle.^{[35]}
The prefix "co" (in "cosine", "cotangent", "cosecant") is found in Edmund Gunter's Canon triangulorum (1620), which defines the cosinus as an abbreviation for the sinus complementi (sine of the complementary angle) and proceeds to define the cotangens similarly.^{[36]}^{[37]}
See also
 All Students Take Calculus – a mnemonic for recalling the signs of trigonometric functions in a particular quadrant of a Cartesian plane
 Bhaskara I's sine approximation formula
 Differentiation of trigonometric functions
 Generalized trigonometry
 Generating trigonometric tables
 Hyperbolic function
 List of integrals of trigonometric functions
 List of periodic functions
 List of trigonometric identities
 Polar sine – a generalization to vertex angles
 Proofs of trigonometric identities
 Versine – for several less used trigonometric functions
Notes
 ^ Klein, Christian Felix (1924) [1902]. Elementarmathematik vom höheren Standpunkt aus: Arithmetik, Algebra, Analysis (in German). 1 (3rd ed.). Berlin: J. Springer.
 ^ Klein, Christian Felix (2004) [1932]. Elementary Mathematics from an Advanced Standpoint: Arithmetic, Algebra, Analysis. Translated by Hedrick, E. R.; Noble, C. A. (Translation of 3rd German ed.). Dover Publications, Inc. / The Macmillan Company. ISBN 9780486434803. Archived from the original on 20180215. Retrieved 20170813.
 ^ "Comprehensive List of Algebra Symbols". Math Vault. 20200325. Retrieved 20200829.
 ^ Protter & Morrey (1970, pp. APP2, APP3)
 ^ "Sine, Cosine, Tangent". www.mathsisfun.com. Retrieved 20200829.
 ^ Protter & Morrey (1970, p. APP7)
 ^ ^{a} ^{b} Rudin, Walter, 1921–2010. Principles of mathematical analysis (Third ed.). New York. ISBN 007054235X. OCLC 1502474.CS1 maint: multiple names: authors list (link)
 ^ Diamond, Harvey (2014). "Defining Exponential and Trigonometric Functions Using Differential Equations". Mathematics Magazine. 87 (1): 37–42. doi:10.4169/math.mag.87.1.37. ISSN 0025570X. S2CID 126217060.
 ^ Spivak, Michael (1967). "15". Calculus. AddisonWesley. pp. 256–257. LCCN 6720770.
 ^ Heng, Cheng and Talbert, "Additional Mathematics" Archived 20 March 2015 at the Wayback Machine, page 228
 ^ Bityutskov, V.I. (20110207). "Trigonometric Functions". Encyclopedia of Mathematics. Archived from the original on 20171229. Retrieved 20171229.
 ^ Larson, Ron (2013). Trigonometry (9th ed.). Cengage Learning. p. 153. ISBN 9781285607184. Archived from the original on 20180215. Extract of page 153 Archived 15 February 2018 at the Wayback Machine
 ^ Abramowitz, Milton and Irene A. Stegun, p. 74
 ^ See Ahlfors, pp. 43–44.
 ^ Stanley, Enumerative Combinatorics, Vol I., p. 149
 ^ Abramowitz; Weisstein.
 ^ Aigner, Martin; Ziegler, Günter M. (2000). Proofs from THE BOOK (Second ed.). SpringerVerlag. p. 149. ISBN 9783642008559. Archived from the original on 20140308.
 ^ Remmert, Reinhold (1991). Theory of complex functions. Springer. p. 327. ISBN 9780387971957. Archived from the original on 20150320. Extract of page 327 Archived 20 March 2015 at the Wayback Machine
 ^ Kannappan, Palaniappan (2009). Functional Equations and Inequalities with Applications. Springer. ISBN 9780387894911.
 ^ ^{a} ^{b} The Universal Encyclopaedia of Mathematics, Pan Reference Books, 1976, pp. 529–530. English version George Allen and Unwin, 1964. Translated from the German version Meyers Rechenduden, 1960.
 ^ Farlow, Stanley J. (1993). Partial differential equations for scientists and engineers (Reprint of Wiley 1982 ed.). Courier Dover Publications. p. 82. ISBN 9780486676203. Archived from the original on 20150320.
 ^ See for example, Folland, Gerald B. (2009). "Convergence and completeness". Fourier Analysis and its Applications (Reprint of Wadsworth & Brooks/Cole 1992 ed.). American Mathematical Society. pp. 77ff. ISBN 9780821847909. Archived from the original on 20150319.
 ^ ^{a} ^{b} ^{c} Boyer, Carl B. (1991). A History of Mathematics (Second ed.). John Wiley & Sons, Inc. ISBN 0471543977, p. 210.
 ^ ^{a} ^{b} Gingerich, Owen (1986). "Islamic Astronomy". Scientific American. Vol. 254. p. 74. Archived from the original on 20131019. Retrieved 20100713.
 ^ Jacques Sesiano, "Islamic mathematics", p. 157, in Selin, Helaine; D'Ambrosio, Ubiratan, eds. (2000). Mathematics Across Cultures: The History of Nonwestern Mathematics. Springer Science+Business Media. ISBN 9781402002601.
 ^ ^{a} ^{b} "trigonometry". Encyclopedia Britannica.
 ^ O'Connor, J. J.; Robertson, E. F. "Madhava of Sangamagrama". School of Mathematics and Statistics University of St Andrews, Scotland. Archived from the original on 20060514. Retrieved 20070908.
 ^ "Fincke biography". Archived from the original on 20170107. Retrieved 20170315.
 ^ O'Connor, John J.; Robertson, Edmund F., "Trigonometric functions", MacTutor History of Mathematics archive, University of St Andrews
 ^ Bourbaki, Nicolás (1994). Elements of the History of Mathematics. Springer.
 ^ Nielsen (1966, pp. xxiii–xxiv)
 ^ The anglicized form is first recorded in 1593 in Thomas Fale's Horologiographia, the Art of Dialling.
 ^ Various sources credit the first use of sinus to either
 Plato Tiburtinus's 1116 translation of the Astronomy of AlBattani
 Gerard of Cremona's translation of the Algebra of alKhwārizmī
 Robert of Chester's 1145 translation of the tables of alKhwārizmī
See Maor (1998), chapter 3, for an earlier etymology crediting Gerard.
See Katx, Victor (July 2008). A history of mathematics (3rd ed.). Boston: Pearson. p. 210 (sidebar). ISBN 9780321387004.  ^ See Plofker, Mathematics in India, Princeton University Press, 2009, p. 257
See "Clark University". Archived from the original on 20080615.
See Maor (1998), chapter 3, regarding the etymology.  ^ Oxford English Dictionary
 ^ Gunter, Edmund (1620). Canon triangulorum.
 ^ Roegel, Denis, ed. (20101206). "A reconstruction of Gunter's Canon triangulorum (1620)" (Research report). HAL. inria00543938. Archived from the original on 20170728. Retrieved 20170728.
References
 Abramowitz, Milton; Stegun, Irene Ann, eds. (1983) [June 1964]. Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables. Applied Mathematics Series. 55 (Ninth reprint with additional corrections of tenth original printing with corrections (December 1972); first ed.). Washington D.C.; New York: United States Department of Commerce, National Bureau of Standards; Dover Publications. ISBN 9780486612720. LCCN 6460036. MR 0167642. LCCN 6512253.
 Lars Ahlfors, Complex Analysis: an introduction to the theory of analytic functions of one complex variable, second edition, McGrawHill Book Company, New York, 1966.
 Boyer, Carl B., A History of Mathematics, John Wiley & Sons, Inc., 2nd edition. (1991). ISBN 0471543977.
 Gal, Shmuel and Bachelis, Boris. An accurate elementary mathematical library for the IEEE floating point standard, ACM Transactions on Mathematical Software (1991).
 Joseph, George G., The Crest of the Peacock: NonEuropean Roots of Mathematics, 2nd ed. Penguin Books, London. (2000). ISBN 0691006598.
 Kantabutra, Vitit, "On hardware for computing exponential and trigonometric functions," IEEE Trans. Computers 45 (3), 328–339 (1996).
 Maor, Eli, Trigonometric Delights, Princeton Univ. Press. (1998). Reprint edition (2002): ISBN 0691095418.
 Needham, Tristan, "Preface"" to Visual Complex Analysis. Oxford University Press, (1999). ISBN 0198534469.
 Nielsen, Kaj L. (1966), Logarithmic and Trigonometric Tables to Five Places (2nd ed.), New York: Barnes & Noble, LCCN 619103
 O'Connor, J. J., and E. F. Robertson, "Trigonometric functions", MacTutor History of Mathematics archive. (1996).
 O'Connor, J. J., and E. F. Robertson, "Madhava of Sangamagramma", MacTutor History of Mathematics archive. (2000).
 Pearce, Ian G., "Madhava of Sangamagramma", MacTutor History of Mathematics archive. (2002).
 Protter, Murray H.; Morrey, Charles B., Jr. (1970), College Calculus with Analytic Geometry (2nd ed.), Reading: AddisonWesley, LCCN 76087042
 Weisstein, Eric W., "Tangent" from MathWorld, accessed 21 January 2006.
External links
Wikibooks has a book on the topic of: Trigonometry 
 "Trigonometric functions", Encyclopedia of Mathematics, EMS Press, 2001 [1994]
 Visionlearning Module on Wave Mathematics
 GonioLab Visualization of the unit circle, trigonometric and hyperbolic functions
 qSine Article about the qanalog of sin at MathWorld
 qCosine Article about the qanalog of cos at MathWorld