A chase is an electrical application where strings of adjacent light bulbs cycle on and off frequently to give the illusion of lights moving along the string. With computerized lighting consoles, building chase sequences has become easier, while previously chases used mechanical means, such as a wheel with an electrified spindle which strikes electrical contacts for each circuit.
Creating a chase effect
In order to achieve a chase "strip lights" are most often used, especially when used in "theatrical" applications.
Similar design is used in computing, where it is known as "marching ants"
Several separate circuits of lights (called channels) are needed to create a chase effect which is a simulation of motion achieved by turning these circuits ON and OFF in sequence. The standard is 3 or 4 channels. For 4 channels the lights are wired with one common and 4 different feeds. Light #1 is wired with lights #5 & 9 & 13, etc. (+4); Light #2 is wired with lights #6 & 10 & 14, etc. (+4); Light #3 is wired with lights #7 & 11 & 15, etc. (+4); Light #4 is wired with lights #8 & 12 & 16, etc. (+4).
The most common 4 channel chase which is seen in a theater Marquee perimeter lighting and other lighting animation applications consists of 4 channel wired light bulbs and an electronic chaser. The electronic chaser turns channel #1 ON while all the other Channels remain OFF. Then after an adjustable period of time it turns OFF channel #1 while turning ON channel #2, then turn OFF channel #2 while turning ON channel #3, then turn OFF channel #3 while turning ON channel #4, then repeat. This creates the illusion that the lights are moving in one direction. Some digital lighting chasers are made to do the above described single light chase pattern along with other combinations of Turning ON and OFF of the light to create different sequences like forward light chase, backward light chase, bouncing, dark chase (1 channel OFF while all 3 others ON), etc... Also, more than 4 channel chasers are used to create more effects and to animate illuminated objects.
- R. M. Marston, Optoelectronics Circuits Manual, p.35, CRC Press LLC, 1988
- LED Chaser Circuit Diagram using IC 555 and CD 4017, Circuit Digest