3D textiles are three-dimensional structures made with different manufacturing methods such as weaving, knitting, braiding, or nonwoven, or made with alternative technologies. 3D textiles are produced with three planar geometry, opposed to 2D textiles that are made on two planes.[clarification needed] 3D weaves are orthogonal weave structures, multilayer structures, and angle interlocks. 3D textiles have more manufacturing opportunities, various properties, and a broader scope of applications. These textiles have a wide range of applications, but they are most commonly used where performance is the primary criterion, such as technical textiles. Composite materials manufacturing is one of the significant areas of using 3D textiles.
3D structures have two kinds of structural formations, i.e., hollow and solid.
3D fabrics can be formed with 3D weaving, 3D knitting, 3D braiding, nonwoven methods and with many newer technologies, such as 3D printing, etc.
|3D Fabric type||Advantage and disadvantages||Reason|
|3D Woven fabrics||Free of delamination,Multilayered, and low in plane properties.||Because of extra strength provided by the z-yarn in the through thickness dimension.|
|3D knitting fabrics||Low fiber volume fraction||Because of looped structure.|
|3D Braided fabrics||Free of delamination,Multilayered, and low transverse properties.||Because of interlacement of interwine type|
|3D Nonwoven fabrics||Lacks mechanical properties||Because of short fibers|
There are several types of 3D woven fabrics that are commercially available; they can be classified according to their weaving technique.
- 3D woven interlock fabrics, are 3D woven fabrics produced on a traditional 2D weaving loom, using proper weave design and techniques, it could either have the weaver/z-yarn going through all the thickness of the fabric or from layer to layer.
- 3D orthogonal woven fabrics, are 3D woven fabrics produced on a special 3D weaving loom. The process to form such fabric was patented by Mohamed and Zhang. The architecture of the 3D orthogonal woven fabric consists of three different sets of yarns; warp yarns (y-yarn), weft yarns (x-yarn), and (z-yarn). Z-yarn is placed in the through-thickness direction of the preform. In 3D orthogonal woven fabric there is no interlacing between warp and weft yarns and they are straight and perpendicular to each other. On the other hand, z-yarns combine the warp and the weft layers by interlacing (moving up and down) along the y-direction over the weft yarn. Interlacing occurs on the top and the bottom surface of the fabric.
- 3D woven fabrics are very useful in applications where the composite structure is subjected to out-of-plane loading, thanks to the extra strength provided by the z-yarn in the through thickness dimension. Thus it can better resist delamination, which is the separation of layers due to out-of-plane forces.
- 3D woven fabrics have a high formability, which means they can easily take the shape of the mold in case of complex composite designs.
- 3D woven fabrics have a highly porous structure, which decreases resin infusion time.
- 3D orthogonal woven fabrics have less or no yarn crimp (the difference in length of yarn, before and after weaving); therefore, mechanical properties of fibers are almost fully used in warp and weft directions. Thus, it could benefit from the maximum load carrying capacity of high performance fibers in these directions.
- The shape of 3D woven fabrics can be tapered in all three directions during the weaving process, producing near net shape fabrics such as I-beams and stiffeners. This means that these preforms could be placed directly in the mold without any additional labor work.
- There is no need for layering to create a part, because the single fabric has a considerable thickness that provides the full three-dimensional reinforcement.
- The 3D woven fabric can be molded into different shapes and can be used in biological applications to create replacement tissues
3D knitting is a method of forming an article of clothing directly from the yarns.  Typical examples are socks and one piece tights. 3D knitted fabrics are also used for the production of certain reinforcement structures.
Nonwoven 3D fabrics are made of short fibers (natural and cut filaments of synthetic yarn). They are comparatively less successful. 
3D printing has entered the world of clothing, with fashion designers experimenting with 3D-printed bikinis, shoes, and dresses.
Footwear and accessories
Nike is using 3D printing to prototype and manufacture the 2012 Vapor Laser Talon football shoe for players of American football, and New Balance is 3D manufacturing custom-fit shoes for athletes. ''Vapor Laser Talon boots'' have 3D-printed footplates. ''Futurecraft STRUNG'' is another 3D printed variant belongs to Adidas.
Though very expensive, the 3D printer also printed a dress. Dita Von Teese wore a 3D printed gown with a fibonacci sequence that was designed by Michael Schmidt and the architect, Francis Bitonti.
Auxetic materials are materials which expand when stretched. They have the ability to be thicker when stretched. Fibers, yarns, and fabrics with auxetic properties are known as auxetic textiles. There are certain types of needle-punched nonwovens. 3D printers are also helpful in making auxetic materials for textiles. These fabrics have advanced properties that are useful in making various composite materials and high-performance applications.
3D textiles are primarily used in manufacturing textile structural composites that are usable in military and construction.
3D textiles in medical textiles contribute to the following sectors:
In treating a wound over time by creating a favourable environment for healing, using both direct and indirect approaches, as well as preventing skin disintegration. Examples include 3D spacer fabrics.
Medical textiles use tubular fabrics with carefully chosen materials that are biocompatible, nonallergic, and nontoxic. For example, Dyneema, PTFE, Polyester, and Teflon are used for implants. The material type varies depending on the implant area; for example, PTFE is preferred for stent implants due to its nonstick properties, while polyolefin is used for mesh implants.
- Aerospace and automobile industry
- Construction industry
- Chen, Xiaogang (2015-05-28). Advances in 3D Textiles. Elsevier. pp. 1–12. ISBN 978-1-78242-219-8.
- Paul, Roshan (2019-04-29). High Performance Technical Textiles. John Wiley & Sons. p. 374. ISBN 978-1-119-32501-7.
- Hu, Jinlian (2008-09-09). 3-D Fibrous Assemblies: Properties, Applications and Modelling of Three-Dimensional Textile Structures. Elsevier. pp. 34, 57, 60, 102, 128. ISBN 978-1-84569-498-2.
- Chen, X.; Potiyaraj, P. (1999-09-01). "CAD/CAM of Orthogonal and Angle-Interlock Woven Structures for Industrial Applications". Textile Research Journal. 69 (9): 648–655. doi:10.1177/004051759906900905. ISSN 0040-5175. S2CID 111178802.
- Harris, Bryan (2003-10-31). Fatigue in Composites: Science and Technology of the Fatigue Response of Fibre-Reinforced Plastics. Elsevier. p. 297. ISBN 978-1-85573-857-7.
- Au, K. F. (2011-02-26). Advances in Knitting Technology. Elsevier. p. 141. ISBN 978-0-85709-062-1.
- N. Khokar, "3D Fabric-forming Processes: Distinguishing between 2D-weaving, 3Dweaving and an Unspecified Non-interlacing Process," Journal of the Textile Institute, vol. 87, no. 1, pp. 97–106, 1996.
- M. H. Mohamed and Z.-H. Zhang, "Method of Forming Variable Cross-Sectional Shaped Three-Dimensional Fabrics". US Patent 5085252, 4 February 1992.
- N. Khokar, "3D-weaving: Theory and Practice," Journal of the Textile Institute, vol. 92, no. 2, pp. 193–207, 2001.
- N. Khokar, "Noobing: A Nonwoven 3D Fabric-forming process explained," Journal of the Textile Institute, vol. 93, no. 1, pp. 52–74, 2002.
- F. C. Campbell, Manufacturing Processes For Advanced Composites, Oxford, UK: Elsevier, 2004.
- Mohamed, Mansour H.; Wetzel, Kyle K. (2006). "3D Woven Carbon/Glass Hybrid Spar Cap for Wind Turbine Rotor Blade". Journal of Solar Energy Engineering. 128 (4): 562–573. doi:10.1115/1.2349543.
- P. Schwartz, "Structure and Mechanics of Textile Fibre Assemblies", Woodhead publishing Ltd. 2008.
- Moutos, Franklin T.; Glass, Katherine A.; Compton, Sarah A.; Ross, Alison K.; Gersbach, Charles A.; Guilak, Farshid; Estes, Bradley T. (2016). "Anatomically shaped tissue-engineered cartilage with tunable and inducible anticytokine delivery for biological joint resurfacing". Proceedings of the National Academy of Sciences. 113 (31): E4513–E4522. doi:10.1073/pnas.1601639113. PMC 4978289. PMID 27432980.
- "3D knitting: after 8,000 years a new dimension in weaving and spinning". the Guardian. 2015-03-08. Retrieved 2021-06-24.
- Chen, Xiaogang (2015-05-28). Advances in 3D Textiles. Elsevier. pp. 183–202. ISBN 978-1-78242-219-8.
- May 2013, Stephanie Pappas 21. "The 10 Weirdest Things Created By 3D Printing". livescience.com. Retrieved 2021-06-25.
- "3D Printed Clothing Becoming a Reality | Blog | Resins Online". web.archive.org. 2013-11-01. Retrieved 2021-06-25.
- "World's first 3D printed bikini heads for the beach". New Atlas. 2011-06-10. Retrieved 2021-06-25.
- "Nike Vapor Laser Talon 3D printed football boot studs by Nike". Dezeen. 2013-03-04. Retrieved 2021-06-25.
- "Adidas reveals Futurecraft STRUNG, the "ultimate" 3D printed running shoe". 3D Printing Industry. 2020-10-09. Retrieved 2021-06-25.
- "Revealing Dita Von Teese in a Fully Articulated 3D Printed Gown - Shapeways Blog". www.shapeways.com. Retrieved 2021-06-25.
- "3D-printed dress for Dita Von Teese". Dezeen. 2013-03-07. Retrieved 2021-06-25.
- Lim, Teik-Cheng (2014-12-27). Auxetic Materials and Structures. Springer. p. 3. ISBN 978-981-287-275-3.
- Hu, Hong; Zhang, Minglonghai; Liu, Yanping (2019-07-11). Auxetic Textiles. Woodhead Publishing. pp. 1–13. ISBN 978-0-08-102212-2.
- "Auxetic Textiles". Journals.matheo.si.
- Verma, Prateek; Shofner, Meisha L.; Lin, Angela; Wagner, Karla B.; Griffin, Anselm C. (2015-07-01). "Inducing out-of-plane auxetic behavior in needle-punched nonwovens". Physica Status Solidi B. 252 (7): 1455–1464. Bibcode:2015PSSBR.252.1455V. doi:10.1002/pssb.201552036. ISSN 0370-1972.
- Rawal, Amit; Sharma, Sumit; Kumar, Vijay; Rao, P.V. Kameswara; Saraswat, Harshvardhan; Jangir, Nitesh Kumar; Kumar, Rajat; Hietel, Dietmar; Dauner, Martin (2019-01-01). "Micromechanical analysis of nonwoven materials with tunable out-of-plane auxetic behavior". Mechanics of Materials. 129: 236–245. doi:10.1016/j.mechmat.2018.11.004. ISSN 0167-6636.
- Hu, Hong; Zhang, Minglonghai; Liu, Yanping (2019-07-11). Auxetic Textiles. Woodhead Publishing. pp. 337, 340. ISBN 978-0-08-102212-2.
- Grimmelsmann, N.; Meissner, H.; Ehrmann, A. (2016). "3D printed auxetic forms on knitted fabrics for adjustable permeability and mechanical properties". IOP Conference Series: Materials Science and Engineering. 137 (1): 012011. Bibcode:2016MS&E..137a2011G. doi:10.1088/1757-899X/137/1/012011. ISSN 1757-899X.
- Kabir, Shahbaj; Kim, Hyelim; Lee, Sunhee (2020-06-01). "Characterization of 3D Printed Auxetic Sinusoidal Patterns/Nylon Composite Fabrics". Fibers and Polymers. 21 (6): 1372–1381. doi:10.1007/s12221-020-9507-6. ISSN 1875-0052. S2CID 219976867.
- Jawaid, Mohammad; Thariq, Mohamed; Saba, Naheed (2018-09-14). Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Woodhead Publishing. p. 414. ISBN 978-0-08-102300-6.
- Kettley, Sarah (2016-06-02). Designing with Smart Textiles. Bloomsbury Publishing. p. 155. ISBN 978-1-4725-6916-5.
- "Auxetic Materials - Applications". AZoM.com. 2001-03-09. Retrieved 2021-06-24.
- "Hook's law". The Economist. 2012-12-01. ISSN 0013-0613. Retrieved 2021-06-24.
- Materials World: The Journal of the Institute of Materials. Institute of Materials. 2006.
- Ko, Frank K. (1993), Morán-López, J. L.; Sanchez, J. M. (eds.), "Advanced Textile Structural Composites", Advanced Topics in Materials Science and Engineering, Boston, MA: Springer US, pp. 117–137, doi:10.1007/978-1-4615-2842-5_8, ISBN 978-1-4615-2842-5, retrieved 2021-06-25
- "Three-dimensional fabrics as medical textiles". Advances in 3D Textiles: 305–340. 2015-01-01. doi:10.1016/B978-1-78242-214-3.00012-7.
- Rajendran, S. (2018-09-20). Advanced Textiles for Wound Care. Woodhead Publishing. p. 185. ISBN 978-0-08-102193-4.
- Gandhi, Kim (2019-11-01). Woven Textiles: Principles, Technologies and Applications. Woodhead Publishing. p. 332. ISBN��978-0-08-102498-0.
- Chen, Xiaogang (2015-05-28). Advances in 3D Textiles. Elsevier. p. 324. ISBN 978-1-78242-219-8.