δ-Butane sultone, δ-Valerosultone
3D model (JSmol)
|Molar mass||g·mol−1 136.17|
|GHS signal word||Warning|
|H302, H315, H319, H335, H341, H351, H412|
|P201, P202, P261, P264, P270, P271, P273, P280, P281, P301+312, P302+352, P304+340, P305+351+338, P308+313, P312, P321, P330, P332+313, P337+313, P362, P403+233, P405, P501|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
1,4-butane sultone is a six-membered δ-sultone and the cyclic ester of 4-hydroxybutanesulfonic acid. As a sulfo-alkylating agent, 1,4-butanesultone is used to introduce the sulfobutyl group (–(CH2)4–SO3−) into hydrophobic compounds possessing nucleophilic functional groups, for example hydroxy groups (as in the case of β-cyclodextrin) or amino groups (as in the case of polymethine dyes). In such, the sulfobutyl group is present as neutral sodium salt and considerably increases the water solubility of the derivatives.
A lab scale synthesis of 1,4-butanesultone starts from 4,4'-dichlorodibutyl ether (accessible from tetrahydrofuran treated with phosphorus oxychloride and concentrated sulfuric acid), which reacts with sodium sulfite forming the corresponding 4,4'-butanedisulfonic disodium salt. By passing it through an acidic ion exchanger, the disodium salt is converted into the disulphonic acid which forms two molecules of 1,4-butanesultone at elevated temperature and reduced pressure under elimination of water. The yields obtained range from 72 to 80%.
Starting from 4-chlorobutan-1-ol (from tetrahydrofuran and hydrogen chloride in 54 to 57% yield), the sodium salt of 4-hydroxybutan-1-sulfonic acid is obtained with sodium sulfite. This salt is converted with strong acids (such as hydrochloric acid) into the very hygroscopic 4-hydroxybutanesulfonic acid and cyclized to 1,4-butanesultone under elimination of water.
The cyclization of 4-hydroxybutanesulfonic acid in aqueous solution proceeds particularly efficiently when heated with high-boiling, water-immiscible solvents (for example 1,2-dichlorobenzene or diethylbenzene, both boiling at about 180 °C) in which 1,4-butane-sultone dissolves and is thereby protected from hydrolysis in the aqueous medium. 1,4-butanesultone is obtained in yields of up to 99% upon reflux within one hour.
The vacuum distillation of the sodium salt of 4-hydroxybutanesulfonic acid leads in the presence of concentrated sulfuric acid directly to 1,4-butanesultone. The sodium salt of 4-chlorobutane-1-sulfonic acid, which is obtained from 1,4-dichlorobutane with sodium sulfite, can also be cyclized to 1,4-butanesultone by heating to 180-250 °C.
The free-radical initiated sulfochlorination of 1-chlorobutane leads to a mixture of positionally isomeric sulfochlorides and chlorination products and is therefore not suitable for the direct preparation of 1,4-butanesultone.
1,4-butanesultone is a viscous, clear, colorless and odorless liquid which reacts in boiling water (to 4-hydroxybutanesulfonic acid) and alcohols (to 4-alkoxybutanesulfonic acid) and dissolves in many organic solvents. At temperatures below the melting point, the compound crystallizes giving "large, magnificent plates".  Compared to the homologous γ-sultone 1,3-propanesultone, 1,4-butanesultone is significantly less reactive as alkylating agent, but classified as mutagenic and carcinogenic.
1-Butylimidazolium-3-(n-butylsulfonate) catalyses as a component of multifunctional catalysts the reaction of platform chemicals from biomass (for example levulinic acid or itaconic acid) into the corresponding lactones, diols or cyclic ethers.
Aminoalkylphosphonic acids (such as aminomethane diphosphonic acid, accessible from phosphorus trichloride, formamide and phosphonic acid) form with 1,4-butanesultone N-(sulfobutyl)aminomethane diphosphonic acids:
The ionic liquid 4-triethylammonium butane-1-sulfonic acid hydrogensulfate (TEBSA HSO4) is formed by the reaction of 1,4-butanesultone with triethylamine in acetonitrile to the zwitterion (85% yield) and subsequent reaction with concentrated sulfuric acid.
4-triethylammonium butane-1-sulfonic acid hydrogensulfate can replace conventional mineral acids as effective and easily recyclable acid catalyst in solvent-free reactions.
The ring opening of 1,4-butanesultone with organic chloride salts yields ionic liquids of the 4-chlorobutylsulfonate type in quantitative yield.
Already in 1949 the reaction of 1,4-butanesultone with the water-insoluble polysaccharide cellulose in sodium hydroxide solution was reported, which leads to a water-soluble product. Derived from this the derivatization of β-cyclodextrin to sulfobutyl ether-beta-cyclodextrin (SBECD) is by now an important application of 1,4-butanesultone. Sulfobutyl ether-beta-cyclodextrin is a water-soluble inclusion compound for the solubilization and stabilization of sparsely water-soluble and chemically instable components. β-Cyclodextrin can be reacted with 1,4-butanesultone in sodium hydroxide solution at 70 °C to the sulfobutyl ether in yields of up to 80% and a degree of substitution of 6.68.
Thereby, the water solubility of the β-cyclodextrin increases from 18.5 g · l-1 to more than 900 g · l-1 at 25 °C. Sulfobutyl ether-beta-cyclodextrin also finds a wide range of applications as an inert vehicle for drug delivery (the drugs transport and release).
- H. Ueda, D. Ou, T. Endo, H. Nagase, K. Tomono, T. Nagai (1998), "Evaluation of a sulfobutyl ether beta-cyclodextrin as a solubilizing/stabilizing agent for several drugs", Drug Dev. Ind. Pharm., 24 (9), pp. 863–867, doi:10.3109/03639049809088532CS1 maint: Multiple names: authors list (link)
- V. Wycisk; et al. (2016), "Responsive Contrast Agents: Synthesis and Characterization of a Tunable Series of pH-Sensitive Near-Infrared Pentamethines", ACS Omega, 1 (5), pp. 808–817, doi:10.1021/acsomega.6b00182
- "4,4'-Dichlorbutyl ether". Organic Syntheses. doi:10.15227/orgsyn.030.0027.
- K. Alexander, L.E. Schniepp (1948), "4,4'-Dichlorodibutylether and its derivatives from tetrahydrofuran", J. Am. Chem. Soc., 70 (5), pp. 1839–1842, doi:10.1021/ja01185a056
- "4-Hydroxy-1-butanesulfonic acid sultone [1-Butanesulfonic acid, 4-hydroxy-, δ-sultone]". Organic Syntheses. doi:10.15227/orgsyn.037.0055.
- "Tetramethylene chlorohydrin". Organic Syntheses. doi:10.15227/orgsyn.017.0084.
- EP 0222970, W. Hünicke, R. Gauglitz, "Sulfoalkylierungsverfahren"
- US 3146242, K.-J. Gardenier, H. Kothe, "Process for the preparation of sultones"
- US 3117133, H. Kothe, K.-J. Gardenier, "Process for the production of sultones"
- J.H. Helberger, G. Manecke, H.M. Fischer (1949), "Zur Kenntnis organischer Sulfonsäuren. II. Mitt.: Die Sulfochlorierung des 1-Chlorbutans und anderer Halogenalkyle: Synthese von Sultonen und eines Sultams", Liebigs Ann. Chem. (in German), 562 (1), pp. 23–35, doi:10.1002/jlac.19495620104CS1 maint: Multiple names: authors list (link)
- J.H. Helberger, H. Lantermann (1954), "Zur Kenntnis organischer Sulfonsäuren V. Mitteilung Synthesen des 1,4-Butansultons", Liebigs Ann. Chem. (in German), 586 (1), pp. 158–164, doi:10.1002/jlac.19545860110
- L. Fishbein (1979), Potential Industrial Carcinogens and Mutagens, 1st Edition, in Studies in Environmental Science 4, Amsterdam: Elsevier, p. 124, ISBN 0-444-41777-X
- D. Wieczorek, A. Dobrowolski, K. Staszak, D. Kwasniewska, P. Dubyk (2017), "Synthesis, surface and antimicrobial activity of piperidine-based sulfobetaines", J. Surfactants Deterg., 20 (1), pp. 151–158, doi:10.1007/s-11743-016-1906-8CS1 maint: Multiple names: authors list (link)
- F.M.A. Geilen; et al. (2010), "Selective and Flexible Transformation of Biomass-Derived Platform Chemicals by a Multifunctional Catalytic System", Angew. Chem., 49 (32), pp. 5510–5514, doi:10.1002/anie.201002060
- US 3870750, K. Wollmann, W. Plöger, K.-H. Wopms, "Process for the production of aminomethane-diphosphonic acid and its salts"
- US 4250107, K. Sommer, G. Schoebel, "N-(Sulfoalkane) amino alkane phosphonic acids and their water-soluble salts"
- A.R. Hajipour, Y. Ghayeb, N. Sheikhan, A.E. Ruoho (2009), "Brønsted acidic ionic liquid as an efficient and reusable catalyst for one-pot synthesis of 1-amidoalkyl 2-naphthols under solvent-free conditions", Tetrahedron Lett., 50, pp. 5649–5651, doi:10.1016/j.tetlet.2009.07.116CS1 maint: Multiple names: authors list (link)
- N. Paape, W. Wie, A. Bösmann, C. Kolbeck, F. Maier, H.-P. Steinrück, P. Wasserscheid, P.S. Schulz (2008), "Chloroalkylsulfonate ionic liquids by ring opening of sultones with organic chloride salts", Chem. Commun., pp. 3867–3869, doi:10.1039/B805444DCS1 maint: Multiple names: authors list (link)
- WO 2009152902, P. Wasserscheid, N. Paape, A. Boesmann, P. Schulz, "Ionic liquids"
- J.H. Helberger, G. Manecke, R. Heyden (1949), "Zur Kenntnis organischer Sulfonsäuren III. Mitteilung: Die Alkylierungsreaktionen der Sultone", Liebigs Ann. Chem. (in German), 565 (1), pp. 22–35, doi:10.1002/jlac.19495650104CS1 maint: Multiple names: authors list (link)
- The United States Pharmacopeia 38th ed., National Formulary 33th (2015), United States Pharmacopeial Convention, ed., Betadex Sulfobutyl Ether Sodium, Rockville, MD, pp. 6546–6548, ISBN 978-1-936424-34-4
- T. Loftsson, D. Duchene (2007), "Cyclodextrins and their pharmaceutical applications", Int. J. Pharm., 329 (1–2), pp. 1–11, doi:10.1016/j.ijpharm.2006.10.044
- S. Klein, T. Zöller (2008), "Cyclodextrine: Molekulare Zuckertüten für Arzneistoffe", Pharm. Ztg. (in German), 26
- D.-Y. Ma, Y.-M. Zhang, J.-N. Xu (2016), "The synthesis and process optimization of sulfo butyl ether β-cyclodextrin derivatives", Tetrahedron, 72 (22), pp. 3105–3112, doi:10.1016/j.tet.2016.04.039CS1 maint: Multiple names: authors list (link)
- R. Challa, A. Ahuya, J. Ali, R.K. Khar (2005), "Cyclodextrins in drug delivery: an updated review", AAPS Pharm. Sci. Tech., 6 (2), pp. E329–E357, doi:10.1208/pt060243CS1 maint: Multiple names: authors list (link)