This article needs additional citations for verification. (May 2019) (Learn how and when to remove this template message) |

In physics, a **transverse wave** is a wave whose oscillations are perpendicular to the direction of the wave's advance. This is in contrast to a longitudinal wave which travels in the direction of its oscillations.

A simple example is given by the waves that can be created on a horizontal length of string by anchoring one end and moving the other end up and down.

Another example is the waves that are created on the membrane of a drum. The waves propagate in directions that are parallel to the membrane plane, but the membrane itself gets displaced up and down, perpendicular to that plane.

Light is another example of a transverse wave, where the oscillations are the electric and magnetic fields, which point at right angles to the ideal light rays that describe the direction of propagation.

Transverse waves commonly occur in elastic solids due to the shear stress generated; the oscillations in this case are the displacement of the solid particles away from their relaxed position, in directions perpendicular to the propagation of the wave. These displacements correspond to a local shear deformation of the material. Hence a transverse wave of this nature is called a **shear wave**. Since fluids cannot resist shear forces while at rest, propagation of transverse waves inside the bulk of fluids is not possible.^{[1]} In seismology, shear waves are also called **secondary waves** or **S-waves**.

Transverse waves are contrasted with longitudinal waves, where the oscillations occur in the direction of the wave. The standard example of a longitudinal wave is a sound wave or "pressure wave" in gases, liquids, or solids, whose oscillations cause compression and expansion of the material through which the wave is propagating. Pressure waves are called "primary waves", or "P-waves" in geophysics.

## Mathematical formulation

Mathematically, the simplest kind of transverse wave is a **plane linearly polarized sinusoidal** one. "Plane" here means that the direction of propagation is unchanging and the same over the whole medium; "linearly polarized" means that the direction of displacement too is unchanging and the same over the whole medium; and the magnitude of the displacement is a sinusoidal function only of time and of position along the direction of propagation.

The motion of such a wave can be expressed mathematically as follows. Let *d* be the direction of propagation (a vector with unit length), and *o* any reference point in the medium. Let *u* be the direction of the oscillations (another unit-length vector perpendicular to *d*). The displacement of a particle at any point *p* of the medium and any time *t* (seconds) will be

where *A* is the wave's **amplitude** or **strength**, *T* is its **period**, *v* is the **speed** of propagation, and *φ* is its **phase** at *o*. All these parameters are real numbers. The symbol "•" denotes the inner product of two vectors.

By this equation, the wave travels in the direction *d* and the oscillations occur back and forth along the direction *u*. The wave is said to be linearly polarized in the direction *u*.

An observer that looks at a fixed point *p* will see the particle there move in a simple harmonic (sinusoidal) motion with period *T* seconds, with maximum particle displacement *A* in each sense; that is, with a **frequency** of *f* = 1/*T* full oscillation cycles every second. A snapshot of all particles at a fixed time *t* will show the same displacement for all particles on each plane perpendicular to *d*, with the displacements in successive planes forming a sinusoidal pattern, with each full cycle extending along *d* by the **wavelength** *λ* = *v* *T* = *v*/*f*. The whole pattern moves in the direction *d* with speed *V*.

The same equation describes a plane linearly polarized sinusoidal light wave, except that the "displacement" *S*(*p*, *t*) is the electric field at point *p* and time *t*. (The magnetic field will be described by the same equation, but with a "displacement" direction that is perpendicular to both *d* and *u*, and a different amplitude.)

### Superposition principle

In a homogeneous elastic medium, complex oscillations (vibrations in a material or light flows) can be described as the superposition of many simple sinusoidal waves, either transverse (linearly polarized) or longitudinal.

The vibrations of a violin string, for example, can be analyzed as the sum of many transverse waves of different frequencies, that displace the string either up or down or left to right. The ripples in a pond can be analyzed as a combination of transverse and longitudinal waves (gravity waves) that propagate together.

### Circular polarization

If the medium is linear and allows multiple independent displacement directions for the same travel direction *d*, we can choose two mutually perpendicular directions of polarization, and express any wave linearly polarized in any other direction as a linear combination (mixing) of those two waves.

By combining two waves with same frequency, velocity, and direction of travel, but with different phases and independent displacement directions, one obtains a circularly or elliptically polarized wave. In such a wave the particles describe circular or elliptical trajectories, instead of moving back and forth.

It may help understanding to revisit the thought experiment with a taut string mentioned above. Notice that you can also launch waves on the string by moving your hand to the right and left instead of up and down. This is an important point. There are two independent (orthogonal) directions that the waves can move.(This is true for any two directions at right angles, up and down and right and left are chosen for clarity.) Any waves launched by moving your hand in a straight line are linearly polarized waves.

But now imagine moving your hand in a circle. Your motion will launch a spiral wave on the string. You are moving your hand simultaneously both up and down and side to side. The maxima of the side to side motion occur a quarter wavelength (or a quarter of a way around the circle, that is 90 degrees or π/2 radians) from the maxima of the up and down motion. At any point along the string, the displacement of the string will describe the same circle as your hand, but delayed by the propagation speed of the wave. Notice also that you can choose to move your hand in a clockwise circle or a counter-clockwise circle. These alternate circular motions produce right and left circularly polarized waves.

To the extent your circle is imperfect, a regular motion will describe an ellipse, and produce elliptically polarized waves. At the extreme of eccentricity your ellipse will become a straight line, producing linear polarization along the major axis of the ellipse. An elliptical motion can always be decomposed into two orthogonal linear motions of unequal amplitude and 90 degrees out of phase, with circular polarization being the special case where the two linear motions have the same amplitude.

## See also

- Longitudinal wave
- Luminiferous aether – the postulated medium for light waves; accepting that light was a transverse wave prompted a search for evidence of this physical medium
- Shear wave splitting
- Sinusoidal plane-wave solutions of the electromagnetic wave equation
- Transverse mode
- Elastography
- Shear-wave elasticity imaging

## References

## External links

- Interactive simulation of transverse wave
- Wave types explained with high speed film and animations
- Weisstein, Eric Wolfgang (ed.). "Transverse Wave".
*ScienceWorld*. - Transverse and Longitudinal Waves Introductory module on these waves at Connexions