3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||184.287 g mol−1|
|Appearance||Vivid orange, opaque crystals|
|Melting point||187 °C (369 °F; 460 K)|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Tetrasulfur tetranitride is an inorganic compound with the formula S4N4. This gold-poppy coloured solid is the most important binary sulfur nitride, which are compounds that contain only the elements sulfur and nitrogen. It is a precursor to many S-N compounds and has attracted wide interest for its unusual structure and bonding.
Nitrogen and sulfur have similar electronegativities. When the properties of atoms are so highly similar, they often form extensive families of covalently bonded structures and compounds. Indeed, a large number of S-N and S-NH compounds are known with S4N4 as their parent.
S4N4 adopts an unusual “extreme cradle” structure, with D2d point group symmetry. It can be viewed as a derivative of a hypothetical eight-membered ring of alternating sulfur and nitrogen atoms.[clarification needed] The pairs of sulfur atoms across the ring are separated by 2.586 Å, resulting in a cage-like structure as determined by single crystal X-Ray diffraction. The nature of the "transannular" S–S interactions remains a matter of investigation because it is significantly shorter than the sum of the van der Waal's distances but has been explained in the context of molecular orbital theory. The bonding in S4N4 is considered to be delocalized, which is indicated by the fact that the bond distances between neighboring sulfur and nitrogen atoms are nearly identical. S4N4 has been shown to co-crystallize with benzene and the C60 molecule.
S4N4 is stable to air. It is, however, unstable in the thermodynamic sense with a positive enthalpy of formation of +460 kJ mol−1. This endothermic enthalpy of formation originates in the difference in energy of S4N4 compared to its highly stable decomposition products:
- 2 S4N4 → 4 N2 + S8
Because one of its decomposition products is a gas, S4N4 can be used as an explosive. Purer samples tend to be more explosive. Small samples can be detonated by striking with a hammer. S4N4 is thermochromic, changing from pale yellow below −30 °C to orange at room temperature to deep red above 100 °C.
- 6 S2Cl2 + 16 NH3 → S4N4 + S8 + 12 NH4Cl
- 4 NH4Cl + 6 S2Cl2 → S4N4 + 16 HCl + S8
- 2 [(CH3)3Si]2NLi + SCl2 → [((CH3)3Si)2N]2S + 2 LiCl
- 2[((CH3)3Si)2N]2S + 2SCl2 + 2SO2Cl2 → S4N4 + 8 (CH3)3SiCl + 2SO2
- S4N4 + SbCl5 → S4N4·SbCl5
- S4N4 + SO3 → S4N4·SO3
The reaction of [Pt2Cl4(PMe2Ph)2] with S4N4 is reported to form a complex where a sulfur forms a dative bond to the metal. This compound upon standing is isomerised to a complex in which a nitrogen atom forms the additional bond to the metal centre.
It is protonated by HBF4 to form a tetrafluoroborate salt:
- S4N4 + HBF4 → [S4N4H+][BF−
- n S4N4 + n CuCl → (S4N4)n-μ-(-Cu-Cl-)n
- 2 S4N4 + 6 OH− + 9 H2O → S2O2−
3 + 2 S3O2−
6 + 8 NH3
- S4N4 + 6 OH− + 3 H2O → S2O2−
3 + 2 SO2−
3 + 4 NH3
S4N4 reacts with metal complexes. The cage remains intact in some cases but in other cases, it is degraded. S4N4 reacts with Vaska's complex ([Ir(Cl)(CO)(PPh3)2] in an oxidative addition reaction to form a six coordinate iridium complex where the S4N4 binds through two sulfur atoms and one nitrogen atom.
S4N4 as a precursor to other S-N compounds
- 3 S4N4 + 4 C5H10NH → (C5H10NH2)+[S4N5]− + (C5H10N)2S + ⅜ S8 + N2
- S4N4 + NMe4N3 → NMe4[S3N3] + ⅛ S8 + 2 N2
Cyclo-[S3N3]− has 10 pi-electrons: 2e−/S plus 1e−/N plus 1e− for the negative charge.
- 2 S4N4 + PPN(N3) → PPN[NS4] + ½ S8 + 5 N2
The anion NS4− has a chain structure described using the resonance [S=S=N–S–S]− ↔ [S–S–N=S=S]−.
Chlorination of S4N4 gives thiazyl chloride.
Passing gaseous S4N4 over silver metal yields the low temperature superconductor polythiazyl or polysulfurnitride (transition temperature (0.26±0.03) K), often simply called "(SN)x". In the conversion, the silver first becomes sulfided, and the resulting Ag2S catalyzes the conversion of the S4N4 into the four-membered ring S2N2, which readily polymerizes.
- S4N4 + 8 Ag → 4 Ag2S + 2 N2
- S4N4 → (SN)x
S4N4 is shock-sensitive. Purer samples are more shock-sensitive than those contaminated with elemental sulfur.
- Greenwood, N. N.; Earnshaw, A. (1997). Chemical Elements (2nd ed.). Boston, MA: Butterworth-Heinemann. pp. 721–725.
- Chivers, T. (2004). A Guide To Chalcogen-Nitrogen Chemistry. Singapore: World Scientific Publishing. ISBN 981-256-095-5.
- Sharma, B. D.; Donohue, J. (1963). "The Crystal and Molecular Structure of Sulfur Nitride, S4N4". Acta Crystallographica. 16 (9): 891–897. doi:10.1107/S0365110X63002401.
- Rzepa, H. S.; Woollins, J. D. (1990). "A PM3 SCF-MO Study of the Structure and Bonding in the Cage Systems S4N4 and S4N4X (X = N+, N−, S, N2S, P+, C, Si, B− and Al−)". Polyhedron. 9 (1): 107–111. doi:10.1016/S0277-5387(00)84253-9.
- Konarev, D. V.; Lyubovskaya, R. N.; Drichko, N. V.; et al. (2000). "Donor-Acceptor Complexes of Fullerene C60 with Organic and Organometallic Donors". Journal of Materials Chemistry. 10 (4): 803–818. doi:10.1039/a907106g.
- Jolly, W. L.; Lipp, S. A. (1971). "Reaction of Tetrasulfur Tetranitride with Sulfuric Acid". Inorganic Chemistry. 10 (1): 33–38. doi:10.1021/ic50095a008.
- Villena-Blanco, M.; Jolly, W. L.; et al. (1967). S. Y. Tyree Jr (ed.). "Tetrasulfur Tetranitride, S
4". Inorganic Syntheses. 9: 98–102. doi:10.1002/9780470132401.ch26.
- Maaninen, A.; Shvari, J.; Laitinen, R. S.; Chivers, T (2002). Coucouvanis, Dimitri (ed.). "Compounds of General Interest". Inorganic Syntheses. 33: 196–199. doi:10.1002/0471224502.ch4. ISBN 9780471208259.
- Kelly, P. F.; Slawin, A. M. Z.; Williams, D. J.; Woollins, J. D. (1992). "Caged explosives: Metal-Stabilized Chalcogen Nitrides". Chemical Society Reviews. 21 (4): 245–252. doi:10.1039/CS9922100245.
- Bojes, J.; Chivers, T.; Oakley, R. D.; et al. (1989). Allcock, H. R. (ed.). "Binary Cyclic Nitrogen-Sulfur Anions". Inorganic Syntheses. 25: 30–35. doi:10.1002/9780470132562.ch7. ISBN 9780470132562.
- Dunn, P. J.; Rzepa, H. S. (1987). "The Reaction between Tetrasulphur Tetranitride (S4N4) and Electron-deficient Alkynes. A Molecular Orbital Study". Journal of the Chemical Society, Perkin Transactions 2. 1987 (11): 1669–1670. doi:10.1039/p29870001669.
- Greene, R. L.; Street, G. B.; Suter, L. J. (1975). "Superconductivity in Polysulfur Nitride (SN)x". Physical Review Letters. 34 (10): 577–579. Bibcode:1975PhRvL..34..577G. doi:10.1103/PhysRevLett.34.577.
- Kelly, P. F.; Woollins, J. D. (1993). "The Reactivity of Se4N4 in Liquid Ammonia". Polyhedron. 12 (10): 1129–1133. doi:10.1016/S0277-5387(00)88201-7.
- Kelly, P. F.; Slawin, A. M. Z.; Soriano-Rama, A. (1997). "Use of Se4N4 and Se(NSO)2 in the Preparation of Palladium Adducts of Diselenium Dinitride, Se2N2; Crystal Structure of [PPh4]2[Pd2Br6(Se2N2)]". Dalton Transactions. 1997 (4): 559–562. doi:10.1039/a606311j.
- Kelly, P. F.; Slawin, A. M. Z. (1996). "Preparation and Crystal Structure of [(AlBr3)2(Se2N2)], the First Example of a Main-Group Element Adduct of Diselenium Dinitride". Dalton Transactions. 1996 (21): 4029–4030. doi:10.1039/DT9960004029.