In baseball statistics, slugging percentage (SLG) is a measure of the batting productivity of a hitter. It is calculated as total bases divided by at bats, through the following formula, where AB is the number of at bats for a given player, and 1B, 2B, 3B, and HR are the number of singles, doubles, triples, and home runs, respectively:
Unlike batting average, slugging percentage gives more weight to extra-base hits such as doubles and home runs, relative to singles. Plate appearances resulting in walks are specifically excluded from this calculation, as an appearance that ends in a walk is not counted as an at bat.
The name is a misnomer, as the statistic is not a percentage but an average of how many bases a player achieves per at bat. It scale of measure whose computed value is a number from 0 to 4. This might not be readily apparent given that a Major League Baseball player's slugging percentage is almost always less than 1 (as a majority of at-bats result in either 0 or 1 base). The statistic gives a double twice the value of a single, a triple three times the value, and a home run four times. The slugging percentage would have to be divided by 4 to actually be a percentage (of bases achieved per at-bat out of total bases possible).
A slugging percentage is always expressed as a decimal to three decimal places, and is generally spoken as if multiplied by 1000. For example, a slugging percentage of .589 would be spoken as "five eighty nine."
For example, in 1920, Babe Ruth played his first season for the New York Yankees. In 458 at bats, Ruth had 172 hits, comprising 73 singles, 36 doubles, 9 triples, and 54 home runs, which brings the total base count to (73 × 1) + (36 × 2) + (9 × 3) + (54 × 4) = 388. His total number of bases (388) divided by his total at-bats (458) is .847 which constitutes his slugging percentage for the season. This also set a record for Ruth which stood until 2001 when Barry Bonds achieved 411 bases in 476 at-bats bringing his slugging percentage to .863, which has been unmatched since.
Long after it was first invented, slugging percentage gained new significance when baseball analysts realized that it combined with on-base percentage (OBP) to form a very good measure of a player's overall offensive production (in fact, OBP + SLG was originally referred to as "production" by baseball writer and statistician Bill James). A predecessor metric was developed by Branch Rickey in 1954. Rickey, in Life magazine, suggested that combining OBP with what he called "extra base power" (EBP) would give a better indicator of player performance than typical Triple Crown stats. EBP was a predecessor to slugging percentage.
Allen Barra and George Ignatin were early adopters in combining the two modern-day statistics, multiplying them together to form what is now known as "SLOB" (Slugging × On-Base). Bill James applied this principle to his runs created formula several years later (and perhaps independently), essentially multiplying SLOB × At-Bats to create the formula:
In 1984, Pete Palmer and John Thorn developed perhaps the most widespread means of combining slugging and on-base percentage: On-base plus slugging (OPS), which is a simple addition of the two values. Because it is easy to calculate, OPS has been used with increased frequency in recent years as a shorthand form to evaluate contributions as a batter.
In a 2015 article, Bryan Grosnick made the point that "on base" and "slugging" may not be comparable enough to be simply added together. "On base" has a theoretical maximum of 1.000 whereas "slugging" has a theoretical maximum of 4.000. The actual numbers don't show as big a difference, with Grosnick listing .350 as a good "on base" and .430 as a good "slugging." He goes on to say that OPS has the advantages of simplicity and availability and further states, "you'll probably get it 75% right, at least."
Perfect slugging percentage
The maximum numerically possible slugging percentage is 4.000. A number of MLB players (117 through the end of the 2016 season) have momentarily had a 4.000 career slugging percentage by homering in their first major league at-bat.
- "Career Leaders & Records for Slugging %". Baseball Reference. Retrieved 2014-02-27.
- Baseball Scorekeeping: A Practical Guide to the Rules, Andres Wirkmaa, Jefferson, North Carolina, London: McFarland & Company, Inc., Publishers, 2003.
- "2018 MLB Team Statistics". Baseball Reference. Retrieved 2019-06-15.
- "Single-Season Leaders & Records for Slugging %". Baseball Reference. Retrieved 2016-12-10.
- Lewis, Dan (2001-03-31). "Lies, Damn Lies, and RBIs". nationalreview.com. Archived from the original on 2012-10-20. Retrieved 2012-07-01.
- Barra, Allen (2001-06-20). "The best season ever?". Salon.com. Retrieved 2007-07-15.
- Separate but not quite equal: Why OPS is a "bad" statistic, Bryan Grosnick, Beyond the Box Score, September 18, 2015.