A silver halide (or silver salt) is one of the chemical compounds that can form between the element silver and one of the halogens. In particular, bromine, chlorine, iodine and fluorine may each combine with silver to produce silver bromide (AgBr), silver chloride (AgCl), silver iodide (AgI), and three forms of silver fluoride, respectively.
As a group, they are often referred to as the silver halides, and are often given the pseudo-chemical notation AgX. Although most silver halides involve silver atoms with oxidation states of +1 (Ag+), silver halides in which the silver atoms have oxidation states of +2 (Ag2+) are known, of which silver(II) fluoride is the only known stable one.
Silver halides are light-sensitive chemicals, and are commonly used in photographic film and paper.
Silver halides are used in photographic film and photographic paper, including graphic art film and paper, where silver halide crystals in gelatin are coated on to a film base, glass or paper substrate. The gelatin is a vital part of the emulsion as the protective colloid of appropriate physical and chemical properties. Gelatin may also contain trace elements (such as sulfur) which increase the light sensitivity of the emulsion, although modern practice uses gelatin without such components. When absorbed by an AgX crystal, photons cause electrons to be promoted to a conduction band (de-localized electron orbital with higher energy than a valence band) which can be attracted by a sensitivity speck, which is a shallow electron trap, which may be a crystalline defect or a cluster of silver sulfide, gold, other trace elements (dopant), or combination thereof, and then combined with an interstitial silver ion to form silver metal speck.
When a silver halide crystal is exposed to light, a sensitivity speck on the surface of the crystal is turned into a small speck of metallic silver (these comprise the invisible or latent image). If the speck of silver contains approximately four or more atoms, it is rendered developable - meaning that it can undergo development which turns the entire crystal into metallic silver. Areas of the emulsion receiving larger amounts of light (reflected from a subject being photographed, for example) undergo the greatest development and therefore results in the highest optical density.
Silver bromide and silver chloride may be used separately or combined, depending on the sensitivity and tonal qualities desired in the product. Silver iodide is always combined with silver bromide or silver chloride, except in the case of some historical processes such as the collodion wet plate and daguerreotype, in which the iodide is sometimes used alone (generally regarded as necessary if a daguerreotype is to be developed by the Becquerel method, in which exposure to strong red light, which affects only the crystals bearing latent image specks, is substituted for exposure to mercury fumes). Silver fluoride is not used in photography.
Silver halides, except for silver fluoride, are very insoluble in water. Silver nitrate can be used to precipitate halides; this application is useful in quantitative analysis of halides. The three main silver halide compounds have distinctive colours that can be used to quickly identify halide ions in a solution. The silver chloride compound forms a white precipitate, silver bromide a creamy coloured precipitate and silver iodide a yellow coloured precipitate.
However, close attention is necessary for other compounds in the test solution. Some compounds can considerably increase or decrease the solubility of AgX. Examples of compounds that increase the solubility include: cyanide, thiocyanate, thiosulfate, thiourea, amines, ammonia, sulfite, thioether, crown ether. Examples of compounds that reduces the solubility include many organic thiols and nitrogen compounds that do not possess solubilizing group other than mercapto group or the nitrogen site, such as mercaptooxazoles, mercaptotetrazoles, especially 1-phenyl-5-mercaptotetrazole, benzimidazoles, especially 2-mercaptobenzimidazole, benzotriazole, and these compounds further substituted by hydrophobic groups. Compounds such as thiocyanate and thiosulfate enhance solubility when they are present in a sufficiently large quantity, due to formation of highly soluble complex ions, but they also significantly depress solubility when present in a very small quantity, due to formation of sparingly soluble complex ions.
Medical technology and use
Scientists from Tel Aviv University are experimenting with silver halide optical fibers for transmitting mid-infrared light from carbon dioxide lasers. The fibers allow laser welding of human tissue, as an alternative to traditional sutures.
- Myers, Dr. Drew. "Chemistry of Photography". Cheresources.com. GlobalSpec. Retrieved January 25, 2009.
- "Israeli researchers pioneer laser treatment for sealing wounds". Israel21c. November 16, 2008. Retrieved March 8, 2009.