A reglet is found on the exterior of a building along a masonry wall, chimney or parapet that meets the roof. It is a groove cut within a mortar joint that receives counter-flashing meant to cover surface flashing used to deflect water infiltration. Reglet can also refer to the counter-flashing itself when it is applied on the surface, known as "face reglet" or "reglet-flashing".
The reglet is created typically with a grinder or masonry cutting saw that cuts 3/4" to 1-1/2" deep into a mortar joint between two bricks. The counter-flashing is then inserted to the reglet and held in place with thin metal wedge covered with a sealant.
A face reglet (also known as reglet-flashing) is counter-flashing that is typically made out of either copper or lead-coated copper. It is applied on the surface of the wall or parapet and screwed into place, with additional sealant placed between the surface and the counter-flashing. It is easily removable for roof repair and flashing replacements.
A face reglet can also be called a raggle and may be related to regle, a groove.
- "Reglet Counterflashing". www.fickbros.com. Retrieved 2018-05-31.
- https://www.riversidesheetmetal.net/flashing-metal/masonry/reglet/. Missing or empty
- Cash, Carl G.. Roofing failures. London: Spon, 2003. Chapter 6. Print.
- Ryan, Thomas, Edward Allen, and Patrick Rand. Detailing for landscape architects: aesthetics, function, constructibility. Hoboken, N.J.: Wiley, 2011. 37. Print.
|This architecture-related article is a stub. You can help Wikipedia by expanding it.|