In economics, a **production function** gives the technological relation between quantities of physical inputs and quantities of output of goods. The production function is one of the key concepts of mainstream neoclassical theories, used to define marginal product and to distinguish allocative efficiency, a key focus of economics. One important purpose of the production function is to address allocative efficiency in the use of factor inputs in production and the resulting distribution of income to those factors, while abstracting away from the technological problems of achieving technical efficiency, as an engineer or professional manager might understand it.

For modelling the case of many outputs and many inputs, researchers often use the so-called Shephard's distance functions or, alternatively, directional distance functions, which are generalizations of the simple production function in economics.^{[1]}

In macroeconomics, aggregate production functions are estimated to create a framework in which to distinguish how much of economic growth to attribute to changes in factor allocation (e.g. the accumulation of physical capital) and how much to attribute to advancing technology. Some non-mainstream economists, however, reject the very concept of an aggregate production function.^{[2]}^{[3]}

## The theory of production functions

In general, economic output is *not* a (mathematical) function of input, because any given set of inputs can be used to produce a range of outputs. To satisfy the mathematical definition of a function, a production function is customarily assumed to specify the *maximum* output obtainable from a given set of inputs. The production function, therefore, describes a boundary or frontier representing the limit of output obtainable from each feasible combination of input. (Alternatively, a production function can be defined as the specification of the minimum input requirements needed to produce designated quantities of output.) Assuming that maximum output is obtained from given inputs allows economists to abstract away from technological and managerial problems associated with realizing such a technical maximum, and to focus exclusively on the problem of allocative efficiency, associated with the *economic* choice of how much of a factor input to use, or the degree to which one factor may be substituted for another. In the production function itself, the relationship of output to inputs is non-monetary; that is, a production function relates physical inputs to physical outputs, and prices and costs are not reflected in the function.

In the decision frame of a firm making economic choices regarding production—how much of each factor input to use to produce how much output—and facing market prices for output and inputs, the production function represents the possibilities afforded by an exogenous technology. Under certain assumptions, the production function can be used to derive a marginal product for each factor. The profit-maximizing firm in perfect competition (taking output and input prices as given) will choose to add input right up to the point where the marginal cost of additional input matches the marginal product in additional output. This implies an ideal division of the income generated from output into an income due to each input factor of production, equal to the marginal product of each input.

The inputs to the production function are commonly termed factors of production and may represent primary factors, which are stocks. Classically, the primary factors of production were land, labour and capital. Primary factors do not become part of the output product, nor are the primary factors, themselves, transformed in the production process. The production function, as a theoretical construct, may be abstracting away from the secondary factors and intermediate products consumed in a production process. The production function is not a full model of the production process: it deliberately abstracts from inherent aspects of physical production processes that some would argue are essential, including error, entropy or waste, and the consumption of energy or the co-production of pollution. Moreover, production functions do not ordinarily model the business processes, either, ignoring the role of strategic and operational business management. (For a primer on the fundamental elements of microeconomic production theory, see production theory basics).

The production function is central to the marginalist focus of neoclassical economics, its definition of efficiency as allocative efficiency, its analysis of how market prices can govern the achievement of allocative efficiency in a decentralized economy, and an analysis of the distribution of income, which attributes factor income to the marginal product of factor input.

### Specifying the production function

A production function can be expressed in a functional form as the right side of

where is the quantity of output and are the quantities of factor inputs (such as capital, labour, land or raw materials).

If is a scalar, then this form does not encompass joint production, which is a production process that has multiple co-products. On the other hand, if maps from to then it is a joint production function expressing the determination of different types of output based on the joint usage of the specified quantities of the inputs.

One formulation, unlikely to be relevant in practice, is as a linear function:

where are parameters that are determined empirically. Another is as a Cobb–Douglas production function:

The Leontief production function applies to situations in which inputs must be used in fixed proportions; starting from those proportions, if usage of one input is increased without another being increased, output will not change. This production function is given by

Other forms include the constant elasticity of substitution production function (CES), which is a generalized form of the Cobb–Douglas function, and the quadratic production function. The best form of the equation to use and the values of the parameters () vary from company to company and industry to industry. In a short run production function at least one of the 's (inputs) is fixed. In the long run all factor inputs are variable at the discretion of management.

Moysan and Senouci (2016) provide an analytical formula for all 2-input, neoclassical production functions.^{[4]}

### Production function as a graph

Any of these equations can be plotted on a graph. A typical (quadratic) production function is shown in the following diagram under the assumption of a single variable input (or fixed ratios of inputs so they can be treated as a single variable). All points above the production function are unobtainable with current technology, all points below are technically feasible, and all points on the function show the maximum quantity of output obtainable at the specified level of usage of the input. From point A to point C, the firm is experiencing positive but decreasing marginal returns to the variable input. As additional units of the input are employed, output increases but at a decreasing rate. Point B is the point beyond which there are diminishing average returns, as shown by the declining slope of the average physical product curve (APP) beyond point Y. Point B is just tangent to the steepest ray from the origin hence the average physical product is at a maximum. Beyond point B, mathematical necessity requires that the marginal curve must be below the average curve (See production theory basics for further explanation and Sickles and Zelenyuk (2019) for more extensive discussions of various production functions, their generalizations and estimations).

### Stages of production

To simplify the interpretation of a production function, it is common to divide its range into 3 stages. In Stage 1 (from the origin to point B) the variable input is being used with increasing output per unit, the latter reaching a maximum at point B (since the average physical product is at its maximum at that point). Because the output per unit of the variable input is improving throughout stage 1, a price-taking firm will always operate beyond this stage.

In Stage 2, output increases at a decreasing rate, and the average and marginal physical product both decline. However, the average product of fixed inputs (not shown) is still rising, because output is rising while fixed input usage is constant. In this stage, the employment of additional variable inputs increases the output per unit of fixed input but decreases the output per unit of the variable input. The optimum input/output combination for the price-taking firm will be in stage 2, although a firm facing a downward-sloped demand curve might find it most profitable to operate in Stage 2. In Stage 3, too much variable input is being used relative to the available fixed inputs: variable inputs are over-utilized in the sense that their presence on the margin obstructs the production process rather than enhancing it. The output per unit of both the fixed and the variable input declines throughout this stage. At the boundary between stage 2 and stage 3, the highest possible output is being obtained from the fixed input.

### Shifting a production function

By definition, in the long run the firm can change its scale of operations by adjusting the level of inputs that are fixed in the short run, thereby shifting the production function upward as plotted against the variable input. If fixed inputs are lumpy, adjustments to the scale of operations may be more significant than what is required to merely balance production capacity with demand. For example, you may only need to increase production by million units per year to keep up with demand, but the production equipment upgrades that are available may involve increasing productive capacity by 2 million units per year.

If a firm is operating at a profit-maximizing level in stage one, it might, in the long run, choose to reduce its scale of operations (by selling capital equipment). By reducing the amount of fixed capital inputs, the production function will shift down. The beginning of stage 2 shifts from B1 to B2. The (unchanged) profit-maximizing output level will now be in stage 2.

### Homogeneous and homothetic production functions

There are two special classes of production functions that are often analyzed. The production function is said to be homogeneous of degree , if given any positive constant , . If , the function exhibits increasing returns to scale, and it exhibits decreasing returns to scale if . If it is homogeneous of degree , it exhibits **constant** returns to scale. The presence of increasing returns means that a one percent increase in the usage levels of all inputs would result in a greater than one percent increase in output; the presence of decreasing returns means that it would result in a less than one percent increase in output. Constant returns to scale is the in-between case. In the Cobb–Douglas production function referred to above, returns to scale are increasing if , decreasing if , and constant if .

If a production function is homogeneous of degree one, it is sometimes called "linearly homogeneous". A linearly homogeneous production function with inputs capital and labour has the properties that the marginal and average physical products of both capital and labour can be expressed as functions of the capital-labour ratio alone. Moreover, in this case if each input is paid at a rate equal to its marginal product, the firm's revenues will be exactly exhausted and there will be no excess economic profit.^{[5]}^{:pp.412–414}

Homothetic functions are functions whose marginal technical rate of substitution (the slope of the isoquant, a curve drawn through the set of points in say labour-capital space at which the same quantity of output is produced for varying combinations of the inputs) is homogeneous of degree zero. Due to this, along rays coming from the origin, the slopes of the isoquants will be the same. Homothetic functions are of the form where is a monotonically increasing function (the derivative of is positive ()), and the function is a homogeneous function of any degree.

### Aggregate production functions

In macroeconomics, aggregate production functions for whole nations are sometimes constructed. In theory they are the summation of all the production functions of individual producers; however there are methodological problems associated with aggregate production functions, and economists have debated extensively whether the concept is valid.^{[3]}

### Criticisms of the production function theory

There are two major criticisms^{[which?]} of the standard form of the production function.^{[6]}

#### On the concept of capital

During the 1950s, '60s, and '70s there was a lively debate about the theoretical soundness of production functions (see the Capital controversy). Although the criticism was directed primarily at aggregate production functions, microeconomic production functions were also put under scrutiny. The debate began in 1953 when Joan Robinson criticized the way the factor input capital was measured and how the notion of factor proportions had distracted economists. She wrote:

"The production function has been a powerful instrument of miseducation. The student of economic theory is taught to write Q = f (L, K ) where L is a quantity of labor, K a quantity of capital and Q a rate of output of commodities. [They] are instructed to assume all workers alike, and to measure L in man-hours of labor; [they] are told something about the index-number problem in choosing a unit of output; and then [they] are hurried on to the next question, in the hope that [they] will forget to ask in what units K is measured. Before [they] ever do ask, [they] have become a professor, and so sloppy habits of thought are handed on from one generation to the next".^{[7]}

According to the argument, it is impossible to conceive of capital in such a way that its quantity is independent of the rates of interest and wages. The problem is that this independence is a precondition of constructing an isoquant. Further, the slope of the isoquant helps determine relative factor prices, but the curve cannot be constructed (and its slope measured) unless the prices are known beforehand.

#### On the empirical relevance

As a result of the criticism on their weak theoretical grounds, it has been claimed that empirical results firmly support the use of neoclassical *well behaved* aggregate production functions. Nevertheless, Anwar Shaikh has demonstrated that they also have no empirical relevance, as long as the alleged good fit comes from an accounting identity, not from any underlying laws of production/distribution.^{[8]}

#### Natural resources

Natural resources are usually absent in production functions. When Robert Solow and Joseph Stiglitz attempted to develop a more realistic production function by including natural resources, they did it in a manner economist Nicholas Georgescu-Roegen criticized as a "conjuring trick": Solow and Stiglitz had failed to take into account the laws of thermodynamics, since their variant allowed man-made capital to be a complete substitute for natural resources. Neither Solow nor Stiglitz reacted to Georgescu-Roegen's criticism, despite an invitation to do so in the September 1997 issue of the journal *Ecological Economics*.^{[2]}^{[9]}^{:127–136} ^{[3]}^{[10]}

### The practice of production functions

The theory of the production function depicts the relation between physical outputs of a production process and physical inputs, i.e. factors of production. The practical application of production functions is obtained by valuing the physical outputs and inputs by their prices. The economic value of physical outputs minus the economic value of physical inputs is the income generated by the production process. By keeping the prices fixed between two periods under review we get the income change generated by a change of the production function. This is the principle how the production function is made a practical concept, i.e. measureable and understandable in practical situations.

## See also

- Assembly line
- Computer-aided manufacturing
- Distribution (economics)
- Division of labour
- Industrial Revolution
- Mass production
- Production
- Production theory basics
- Production, costs, and pricing
- Production possibility frontier
- Productive forces
- Productive and unproductive labour
- Productivity
- Productivity improving technologies (historical)
- Productivity model
- Second Industrial Revolution

## Footnotes

**^**Sickles, R., & Zelenyuk, V. (2019). Measurement of Productivity and Efficiency: Theory and Practice. Cambridge: Cambridge University Press. doi:10.1017/9781139565981- ^
^{a}^{b}Daly, H (1997). "Forum on Georgescu-Roegen versus Solow/Stiglitz".*Ecological Economics*.**22**(3): 261–306. doi:10.1016/S0921-8009(97)00080-3. - ^
^{a}^{b}^{c}Cohen, A. J.; Harcourt, G. C. (2003). "Retrospectives: Whatever Happened to the Cambridge Capital Theory Controversies?".*Journal of Economic Perspectives*.**17**(1): 199–214. doi:10.1257/089533003321165010. **^**see Moysan and, G.; Senouci, M. (2016). "A note on 2-input neoclassical production functions".*Journal of Mathematical Economics*.**67**: 80–86. doi:10.1016/j.jmateco.2016.09.011.**^**Chiang, Alpha C. (1984)*Fundamental Methods of Mathematical Economics*, third edition, McGraw-Hill.**^**On the history of production functions, see Mishra, S. K. (2007). "A Brief History of Production Functions".*Working Paper*. SSRN 1020577.**^**Robinson, Joan (1953). "The Production Function and the Theory of Capital".*Review of Economic Studies*.**21**(2): 81–106. doi:10.2307/2296002. JSTOR 2296002.**^**Shaikh, A. (1974). "Laws of Production and Laws of Algebra: The Humbug Production Function".*Review of Economics and Statistics*.**56**(1): 115–120. doi:10.2307/1927538. JSTOR 1927538.**^**Daly, Herman E. (1999). "How long can neoclassical economists ignore the contributions of Georgescu-Roegen?" (PDF contains full book). In Daly, Herman E. (2007) (ed.).*Ecological Economics and Sustainable Development. Selected Essays of Herman Daly*. Cheltenham: Edward Elgar. ISBN 9781847201010.**^**Ayres, Robert U.; Warr, Benjamin (2009).*The Economic Growth Engine: How Useful Work Creates Material Prosperity*. ISBN 978-1-84844-182-8.

## References

- Jorgenson, D.W.; Ho, M.S.; Samuels, J.D. (2014).
*Long-term Estimates of U.S. Productivity and Growth*(PDF). Tokyo: Third World KLEMS Conference. - Riistama, K.; Jyrkkiö E. (1971).
*Operatiivinen laskentatoimi (Operative accounting)*. Weilin + Göös. p. 335. - Saari, S. (2006).
*Productivity. Theory and Measurement in Business*(PDF). Espoo, Finland: European Productivity Conference. - Saari, S. (2011).
*Production and Productivity as Sources of Well-being*. MIDO OY. p. 25.

- Sickles, R., & Zelenyuk, V. (2019). Measurement of Productivity and Efficiency: Theory and Practice. Cambridge: Cambridge University Press. https://assets.cambridge.org/97811070/36161/frontmatter/9781107036161_frontmatter.pdf

## Further reading

- Brems, Hans (1968). "The Production Function".
*Quantitative Economic Theory*. New York: Wiley. pp. 62–74. - Craig, C.; Harris, R. (1973). "Total Productivity Measurement at the Firm Level".
*Sloan Management Review*(Spring 1973): 13–28.CS1 maint: ref=harv (link) - Guerrien B. and O. Gun (2015) "Putting an end to the aggregate function of production... forever?",
*Real World Economic Review*N°73 - Hulten, C. R. (January 2000). "Total Factor Productivity: A Short Biography".
*NBER Working Paper No. 7471*. doi:10.3386/w7471.CS1 maint: ref=harv (link) - Heathfield, D. F. (1971).
*Production Functions*. Macmillan Studies in Economics. New York: Macmillan Press. - Intriligator, Michael D. (1971).
*Mathematical Optimalization and Economic Theory*. Englewood Cliffs: Prentice-Hall. pp. 178–189. ISBN 0-13-561753-7. - Laidler, David (1981).
*Introduction to Microeconomics*(Second ed.). Oxford: Philip Allan. pp. 124–137. ISBN 0-86003-131-4. - Maurice, S. Charles; Phillips, Owen R.; Ferguson, C. E. (1982).
*Economic Analysis: Theory and Application*(Fourth ed.). Homewood: Irwin. pp. 169–222. ISBN 0-256-02614-9. - Moroney, J. R. (1967). "Cobb–Douglass production functions and returns to scale in US manufacturing industry".
*Western Economic Journal*.**6**(1): 39–51. doi:10.1111/j.1465-7295.1967.tb01174.x. - Pearl, D.; Enos, J. (1975). "Engineering Production Functions and Technological Progress".
*Journal of Industrial Economics*.**24**(1): 55–72. doi:10.2307/2098099. JSTOR 2098099. - Shephard, R. (1970).
*Theory of Cost and Production Functions*. Princeton, NJ: Princeton University Press. - Thompson, A. (1981).
*Economics of the Firm: Theory and Practice*(3rd ed.). Englewood Cliffs: Prentice Hall. ISBN 0-13-231423-1. - Sickles, R., & Zelenyuk, V. (2019). Measurement of Productivity and Efficiency: Theory and Practice. Cambridge: Cambridge University Press. https://assets.cambridge.org/97811070/36161/frontmatter/9781107036161_frontmatter.pdf