This article needs additional citations for verification. (June 2020) (Learn how and when to remove this template message)
In geometry, a paraboloid is a quadric surface that has exactly one axis of symmetry and no center of symmetry. The term "paraboloid" is derived from parabola, which refers to a conic section that has a similar property of symmetry.
Every plane section of a paraboloid by a plane parallel to the axis of symmetry is a parabola. The paraboloid is hyperbolic if every other plane section is either a hyperbola, or two crossing lines (in the case of a section by a tangent plane). The paraboloid is elliptic if every other nonempty plane section is either an ellipse, or a single point (in the case of a section by a tangent plane). A paraboloid is either elliptic or hyperbolic.
Equivalently, a paraboloid may be defined as a quadric surface that is not a cylinder, and has an implicit equation whose part of degree two may be factored over the complex numbers into two different linear factors. The paraboloid is hyperbolic if the factors are real; elliptic if the factors are complex conjugate.
An elliptic paraboloid is shaped like an oval cup and has a maximum or minimum point when its axis is vertical. In a suitable coordinate system with three axes x, y, and z, it can be represented by the equation:892
where a and b are constants that dictate the level of curvature in the xz and yz planes respectively. In this position, the elliptic paraboloid opens upward.
A hyperbolic paraboloid (not to be confused with a hyperboloid) is a doubly ruled surface shaped like a saddle. In a suitable coordinate system, a hyperbolic paraboloid can be represented by the equation:896
In this position, the hyperbolic paraboloid opens downward along the x-axis and upward along the y-axis (that is, the parabola in the plane x = 0 opens upward and the parabola in the plane y = 0 opens downward).
Any paraboloid (elliptic or hyperbolic) is a translation surface, as it can be generated by a moving parabola directed by a second parabola.
Properties and applications
In a suitable Cartesian coordinate system, an elliptic paraboloid has the equation
Obviously, a circular paraboloid contains circles. This is also true in the general case (see Circular section).
- Plane sections
The plane sections of an elliptic paraboloid can be:
- a parabola, if the plane is parallel to the axis,
- a point, if the plane is a tangent plane.
- an ellipse or empty, otherwise.
On the axis of a circular paraboloid, there is a point called the focus (or focal point), such that, if the paraboloid is a mirror, light (or other waves) from a point source at the focus is reflected into a parallel beam, parallel to the axis of the paraboloid. This also works the other way around: a parallel beam of light that is parallel to the axis of the paraboloid is concentrated at the focal point. For a proof, see Parabola § Proof of the reflective property.
Therefore, the shape of a circular paraboloid is widely used in astronomy for parabolic reflectors and parabolic antennas.
The hyperbolic paraboloid is a doubly ruled surface: it contains two families of mutually skew lines. The lines in each family are parallel to a common plane, but not to each other. Hence the hyperbolic paraboloid is a conoid.
These properties characterize hyperbolic paraboloids and are used in one of the oldest definitions of hyperbolic paraboloids: a hyperbolic paraboloid is a surface that may be generated by a moving line that is parallel to a fixed plane and crosses two fixed skew lines.
This property makes it simple to manufacture a hyperbolic paraboloid from a variety of materials and for a variety of purposes, from concrete roofs to snack foods. In particular, Pringles fried snacks resemble a truncated hyperbolic paraboloid.
- Plane sections
A plane section of a hyperbolic paraboloid with equation
- a line, if the plane is parallel to the z-axis, and has an equation of the form ,
- a parabola, if the plane is parallel to the z-axis, and the section is not a line,
- a pair of intersecting lines, if the plane is a tangent plane,
- a hyperbola, otherwise.
- Examples in architecture
- St. Mary's Cathedral, Tokyo, Japan (1964)
- Cathedral of Saint Mary of the Assumption, San Francisco, California, USA (1971)
- Saddledome in Calgary, Alberta, Canada (1983)
- L'Oceanogràfic in Valencia, Spain (2003)
- London Velopark, England (2011)
Warszawa Ochota railway station, an example of a hyperbolic paraboloid structure
Hyperbolic paraboloid thin-shell roofs at L'Oceanogràfic, Valencia, Spain (taken 2019)
Cylinder between pencils of elliptic and hyperbolic paraboloids
The pencil of elliptic paraboloids
and the pencil of hyperbolic paraboloids
approach the same surface
for , which is a parabolic cylinder (see image).
The elliptic paraboloid, parametrized simply as
and mean curvature
which are both always positive, have their maximum at the origin, become smaller as a point on the surface moves further away from the origin, and tend asymptotically to zero as the said point moves infinitely away from the origin.
The hyperbolic paraboloid, when parametrized as
has Gaussian curvature
and mean curvature
Geometric representation of multiplication table
If the hyperbolic paraboloid
is rotated by an angle of π/ in the +z direction (according to the right hand rule), the result is the surface
and if a = b then this simplifies to
Finally, letting a = √, we see that the hyperbolic paraboloid
is congruent to the surface
The two paraboloidal ℝ2 → ℝ functions
which is the analytic continuation of the ℝ → ℝ parabolic function f(x) = x2/.
Dimensions of a paraboloidal dish
The dimensions of a symmetrical paraboloidal dish are related by the equation
where F is the focal length, D is the depth of the dish (measured along the axis of symmetry from the vertex to the plane of the rim), and R is the radius of the rim. They must all be in the same unit of length. If two of these three lengths are known, this equation can be used to calculate the third.
A more complex calculation is needed to find the diameter of the dish measured along its surface. This is sometimes called the "linear diameter", and equals the diameter of a flat, circular sheet of material, usually metal, which is the right size to be cut and bent to make the dish. Two intermediate results are useful in the calculation: P = 2F (or the equivalent: P = R2/) and Q = √, where F, D, and R are defined as above. The diameter of the dish, measured along the surface, is then given by
The volume of the dish, the amount of liquid it could hold if the rim were horizontal and the vertex at the bottom (e.g. the capacity of a paraboloidal wok), is given by
where the symbols are defined as above. This can be compared with the formulae for the volumes of a cylinder (πR2D), a hemisphere (2π/R2D, where D = R), and a cone (π/R2D). πR2 is the aperture area of the dish, the area enclosed by the rim, which is proportional to the amount of sunlight a reflector dish can intercept. The surface area of a parabolic dish can be found using the area formula for a surface of revolution which gives
- Ellipsoid – Quadric surface that looks like a deformed sphere
- Hyperboloid – Unbounded quadric surface
- Parabolic loudspeaker
- Parabolic reflector – Reflector that has the shape of a paraboloid
- Thomas, George B.; Maurice D. Weir; Joel Hass; Frank R. Giordiano (2005). Thomas' Calculus 11th ed. Pearson Education, Inc. p. 892. ISBN 0-321-18558-7.
- Weisstein, Eric W. "Hyperbolic Paraboloid." From MathWorld--A Wolfram Web Resource. http://mathworld.wolfram.com/HyperbolicParaboloid.html
- Thomas, George B.; Maurice D. Weir; Joel Hass; Frank R. Giordiano (2005). Thomas' Calculus 11th ed. Pearson Education, Inc. p. 896. ISBN 0-321-18558-7.
- Zill, Dennis G.; Wright, Warren S. (2011), Calculus: Early Transcendentals, Jones & Bartlett Publishers, p. 649, ISBN 9781449644482.
- Media related to Paraboloid at Wikimedia Commons