The Mendenhall Order marked a decision to change the fundamental standards of length and mass of the United States from the customary standards based on those of England to metric standards (Mendenhall 1922). It was issued on April 5, 1893, by Thomas Corwin Mendenhall, superintendent of the U.S. Coast and Geodetic Survey, with the approval of the United States Secretary of the Treasury, John Griffin Carlisle. The order was issued as the Survey's Bulletin No. 26 - Fundamental Standards of Length and Mass.
Standards before the order
In October 1834, the United Kingdom Houses of Parliament were destroyed in a fire, and the British standards of length and mass were also destroyed. "When the new imperial standards to replace them were completed in 1855, two copies of the yard and one copy of the avoirdupois pound were presented to the United States" (Barbrow & Judson 1976, 9). These were superior to the yard then in use, so one of them was adopted as the United States national standard yard. These yards were taken to England and re-compared with the imperial yard in 1876 and 1888. The pound provided by the United Kingdom agreed with the United States mint pound, which remained the national standard according to Barbrow and Judson. Hockert (2015) claims the UK pound replaced the mint pound.
These were the fundamental standards for customary length and mass measurements in the United States, but the Office of Weights and Measures had other standards for metric measurements.
Official recognition of the metric system
The Metric Act of 1866 was passed by Congress and allowed, but did not require, the use of the metric system. Included in the law was a table of conversion factors between the traditional and metric units. The U.S. Coast and Geodetic Survey Office of Weights and Measures had on hand a number of metric standards, and selected the iron “Committee Meter” and the platinum "Arago Kilogram" to be the national standards for metric measurement; the standard yard and pound previously mentioned continued to be the standards for customary measurements. (Barbrow & Judson 1976, 10).
A series of conferences in France between 1870 and 1875 led to the signing of the Metre Convention and to the permanent establishment of the International Bureau of Weights and Measures, abbreviated BIPM after the French name. The BIPM made meter and kilogram standards for all the countries that signed the treaty; the two meters and two kilograms allocated to the United States arrived in 1890, and were adopted as national standards (Barbrow & Judson 1976, 16).
Reasons for the change
The imperial standard yard of 1855 was found to be unstable and shortening by measurable amounts (Barbrow & Judson 1976, 16). Also, the mint pound was found to be “likewise unfit for use.” For several years before the Mendenhall order was actually issued, the Office of Weights and Measures was ���practically forced” to use the metric standards because of their superior stability, and because they were better designed for carrying out precision comparisons. The Office found that the conversion tables in the 1866 law were satisfactory and used them to derive customary length and mass from the metric standards. The conversions were 1 yard = 3600⁄3937 meter and 1 pound = 0.4535924277 kilogram. The Mendenhall order amounted to a formal announcement of a change that had already occurred (Mendenhall 1922).
Refinement of the conversions
The definitions of 1893 remained unchanged for 66 years, but increasing precision in measurements gradually made the differences in the standards in use in English-speaking countries important. By the international yard and pound agreement of July 1, 1959, Australia, Canada, New Zealand, South Africa, the United Kingdom, and the United States agreed that 1 yard = 0.9144 meter and that 1 avoirdupois pound = 0.45359237 kilogram (but see U.S. survey foot in the foot) (Barbrow & Judson 1976, 20).
Standards versus systems
Mendenhall ordered that the standards used for the most accurate length and mass comparison change from certain yard and pound objects to certain meter and kilogram objects, but did not require anyone outside of the Office of Weights and Measures to change from the customary units to the metric system.
- Barbrow, Louis E. and Judson, Lewis V. (1976). Weights and measures standards of the United States: A brief history (NBS Special Publication 447). Washington D.C.: Superintendent of Documents. Viewed August 23, 2006 at http://physics.nist.gov/Pubs/SP447/ at the Wayback Machine (archived December 10, 2006)
- Hockert, Carol. (2015, July 21). "Address to the National Conference on Weights and Measures to Commemorate Their 100th Meeting". National Institute of Standards and Technology.
- Mendenhall, T. C. (1893). "Fundamental Standards of Length and Mass". Reprinted in Barbrow, Louis E. and Judson, Lewis V. (1976). Weights and measures standards of the United States: A brief history (NBS Special Publication 447). Washington D.C.: Superintendent of Documents. Viewed August 23, 2006 at http://physics.nist.gov/Pubs/SP447/ at the Wayback Machine (archived December 10, 2006) pp. 28–29.
- Mendenhall, T. C. (1922). "The United States Fundamental Standards of Length and Mass". Science, 56(1449), 337–380, ISSN 0036-8075.