Hydrogen (cryogenic liquid); hydrogen, refrigerated liquid; LH2, para-hydrogen
3D model (JSmol)
|Molar mass||2.016 g·mol−1|
|Density||70.85 g/L (4.423 lb/cu ft)|
|Melting point||−259.14 °C (−434.45 °F; 14.01 K)|
|Boiling point||−252.87 °C (−423.17 °F; 20.28 K)|
|571 °C (1,060 °F; 844 K)|
|Explosive limits||LEL 4.0%; UEL 74.2% (in air)|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
To exist as a liquid, H2 must be cooled below hydrogen's critical point of 33 K. However, for hydrogen to be in a fully liquid state without boiling at atmospheric pressure, it needs to be cooled to 20.28 K (−423.17 °F; −252.87 °C). One common method of obtaining liquid hydrogen involves a compressor resembling a jet engine in both appearance and principle. Liquid hydrogen is typically used as a concentrated form of hydrogen storage. As in any gas, storing it as liquid takes less space than storing it as a gas at normal temperature and pressure. However, the liquid density is very low compared to other common fuels. Once liquefied, it can be maintained as a liquid in pressurized and thermally insulated containers.
In 1885, Zygmunt Florenty Wróblewski published hydrogen's critical temperature as 33 K; critical pressure, 13.3 atmospheres; and boiling point, 23 K.
Hydrogen was liquefied by James Dewar in 1898 by using regenerative cooling and his invention, the vacuum flask. The first synthesis of the stable isomer form of liquid hydrogen, parahydrogen, was achieved by Paul Harteck and Karl Friedrich Bonhoeffer in 1929.
Spin isomers of hydrogen
The two nuclei in a dihydrogen molecule can have two different spin states. Parahydrogen, in which the two nuclear spins are antiparallel, is more stable than orthohydrogen, in which the two are parallel. At room temperature, gaseous hydrogen is mostly in the ortho isomeric form due to thermal energy, but an ortho-enriched mixture is only metastable when liquified at low temperature. It slowly undergoes an exothermic reaction to become the para isomer, with enough energy released as heat to cause some of the liquid to boil. To prevent loss of the liquid during long-term storage, it is therefore intentionally converted to the para isomer as part of the production process, typically using a catalyst such as iron(III) oxide, activated carbon, platinized asbestos, rare earth metals, uranium compounds, chromium(III) oxide, or some nickel compounds.
Liquid hydrogen is a common liquid rocket fuel for rocketry applications — both NASA and the United States Air Force operate a large number of liquid hydrogen tanks with an individual capacity up to 3.8 million liters (1 million U.S. gallons). In most rocket engines fueled by liquid hydrogen, it first cools the nozzle and other parts before being mixed with the oxidizer — usually liquid oxygen (LOX) — and burned to produce water with traces of ozone and hydrogen peroxide. Practical H2–O2 rocket engines run fuel-rich so that the exhaust contains some unburned hydrogen. This reduces combustion chamber and nozzle erosion. It also reduces the molecular weight of the exhaust, which can actually increase specific impulse, despite the incomplete combustion.
|ACGIH TLV-TWA||Simple asphyxiant|
Liquid hydrogen can be used as the fuel for an internal combustion engine or fuel cell. Various submarines (Type 212 submarine, Type 214 submarine) and concept hydrogen vehicles have been built using this form of hydrogen (see DeepC, BMW H2R). Due to its similarity, builders can sometimes modify and share equipment with systems designed for liquefied natural gas (LNG). However, because of the lower volumetric energy, the hydrogen volumes needed for combustion are large. Unless direct injection is used, a severe gas-displacement effect also hampers maximum breathing and increases pumping losses.
Liquid hydrogen is also used to cool neutrons to be used in neutron scattering. Since neutrons and hydrogen nuclei have similar masses, kinetic energy exchange per interaction is maximum (elastic collision). Finally, superheated liquid hydrogen was used in many bubble chamber experiments.
The product of its combustion with oxygen alone is water vapor (although if its combustion is with oxygen and nitrogen it can form toxic chemicals), which can be cooled with some of the liquid hydrogen. Since water is often considered harmless to the environment, an engine burning it can be considered "zero emissions". In aviation, however, water vapor emitted in the atmosphere contributes to global warming (to a lesser extent than CO2). Liquid hydrogen also has a much higher specific energy than gasoline, natural gas, or diesel.
The density of liquid hydrogen is only 70.99 g/L (at 20 K), a relative density of just 0.07. Although the specific energy is more than twice that of other fuels, this gives it a remarkably low volumetric energy density, many fold lower.
Liquid hydrogen requires cryogenic storage technology such as special thermally insulated containers and requires special handling common to all cryogenic fuels. This is similar to, but more severe than liquid oxygen. Even with thermally insulated containers it is difficult to keep such a low temperature, and the hydrogen will gradually leak away (typically at a rate of 1% per day). It also shares many of the same safety issues as other forms of hydrogen, as well as being cold enough to liquefy, or even solidify atmospheric oxygen, which can be an explosion hazard.
Due to its cold temperatures, liquid hydrogen is a hazard for cold burns. Elemental hydrogen as a liquid is biologically inert and its only human health hazard as a vapor is displacement of oxygen, resulting in asphyxiation. Because of its flammability, liquid hydrogen should be kept away from heat or flame unless ignition is intended.
- Thermophysical Properties of Hydrogen , nist.gov, accessed 2012-09-14
- Information specific to liquid hydrogen Archived 2009-07-17 at the Wayback Machine, harvard.edu, accessed 2009-06-12
- IPTS-1968, iupac.org, accessed 2009-06-12
- Chemical elements data references
- Properties Of Gases. Roymech.co.uk. Retrieved on 2011-08-28.
- Liquid Air/LH2. Astronautix.com. Retrieved on 2011-08-28.
- "Liquefaction of "Permanent" Gases" (PDF of lecture notes). 2011. Retrieved 2017-10-16.
- Flynn, Thomas (2004). Cryogenic Engineering, Second Edition, Revised and Expanded. CRC Press. p. 401. ISBN 978-0-203-02699-1.
- Nojoumi, H. (2008-11-10). "Greenhouse gas emissions assessment of hydrogen and kerosene-fueled aircraft propulsion". Internation Journal of Hydrogen. 34: v. doi:10.1016/j.ijhydene.2008.11.017.
- Hydrogen As an Alternative Fuel Archived 2008-08-08 at the Wayback Machine. Almc.army.mil. Retrieved on 2011-08-28.
- Cengel, Yunus A. and Turner, Robert H. (2004). Fundamentals of thermal-fluid sciences, McGraw-Hill, p. 78, ISBN 0-07-297675-6