Because parts of the core closer to the fiber axis have a higher refractive index than the parts near the cladding, light rays follow sinusoidal paths down the fiber. The most common refractive index profile for a graded-index fiber is very nearly parabolic. The parabolic profile results in continual refocusing of the rays in the core, and minimizes modal dispersion.
Multi-mode optical fiber can be built with either graded index or step index. The advantage of the multi-mode graded index compared to the multi-mode step index is the considerable decrease in modal dispersion. Modal dispersion can be further decreased by selecting a smaller core size (less than 5-10μm) and forming a single mode step index fiber.
This type of fiber is normalized by the International Telecommunications Union ITU-T at recommendation G.651.1.
Pulse dispersion in a graded index optical fiber is given by
is the difference in refractive indices of core and cladding,
is the refractive index of the cladding,
is the length of the fiber taken for observing the pulse dispersion,
is the speed of light, and
is the constant of graded index profile.
- A Reference Guide to Optical Fibers and Light Guides, archived from the original on 2015-07-22, retrieved 2015-04-22 Cite uses deprecated parameter
- Characteristics of a 50/125 μm multimode graded index optical fibre cable for the optical access network, retrieved 2012-11-23
- This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C" (in support of MIL-STD-188).
|This optics-related article is a stub. You can help Wikipedia by expanding it.|