**Spatial analysis** or **spatial statistics** includes any of the formal techniques which study entities using their topological, geometric, or geographic properties. Spatial analysis includes a variety of techniques, many still in their early development, using different analytic approaches and applied in fields as diverse as astronomy, with its studies of the placement of galaxies in the cosmos, to chip fabrication engineering, with its use of "place and route" algorithms to build complex wiring structures. In a more restricted sense, spatial analysis is the technique applied to structures at the human scale, most notably in the analysis of geographic data.

Complex issues arise in spatial analysis, many of which are neither clearly defined nor completely resolved, but form the basis for current research. The most fundamental of these is the problem of defining the spatial location of the entities being studied.

Classification of the techniques of spatial analysis is difficult because of the large number of different fields of research involved, the different fundamental approaches which can be chosen, and the many forms the data can take.

## Contents

## History of spatial analysis

Spatial analysis can perhaps be considered^{[according to whom?]} to have arisen with early attempts at cartography and surveying but many fields have contributed to its rise in modern form. Biology contributed through botanical studies of global plant distributions and local plant locations, ethological studies of animal movement, landscape ecological studies of vegetation blocks, ecological studies of spatial population dynamics, and the study of biogeography. Epidemiology contributed with early work on disease mapping, notably John Snow's work of mapping an outbreak of cholera, with research on mapping the spread of disease and with location studies for health care delivery. Statistics has contributed greatly through work in spatial statistics. Economics has contributed notably through spatial econometrics. Geographic information system is currently a major contributor due to the importance of geographic software in the modern analytic toolbox. Remote sensing has contributed extensively in morphometric and clustering analysis. Computer science has contributed extensively through the study of algorithms, notably in computational geometry. Mathematics continues to provide the fundamental tools for analysis and to reveal the complexity of the spatial realm, for example, with recent work on fractals and scale invariance. Scientific modelling provides a useful framework for new approaches.

## Fundamental issues in spatial analysis

Spatial analysis confronts many fundamental issues in the definition of its objects of study, in the construction of the analytic operations to be used, in the use of computers for analysis, in the limitations and particularities of the analyses which are known, and in the presentation of analytic results. Many of these issues are active subjects of modern research.

Common errors often arise in spatial analysis, some due to the mathematics of space, some due to the particular ways data are presented spatially, some due to the tools which are available. Census data, because it protects individual privacy by aggregating data into local units, raises a number of statistical issues. The fractal nature of coastline makes precise measurements of its length difficult if not impossible. A computer software fitting straight lines to the curve of a coastline, can easily calculate the lengths of the lines which it defines. However these straight lines may have no inherent meaning in the real world, as was shown for the coastline of Britain.

These problems represent a challenge in spatial analysis because of the power of maps as media of presentation. When results are presented as maps, the presentation combines spatial data which are generally accurate with analytic results which may be inaccurate, leading to an impression that analytic results are more accurate than the data would indicate.^{[1]}

### Spatial characterization

The definition of the spatial presence of an entity constrains the possible analysis which can be applied to that entity and influences the final conclusions that can be reached. While this property is fundamentally true of all analysis, it is particularly important in spatial analysis because the tools to define and study entities favor specific characterizations of the entities being studied. Statistical techniques favor the spatial definition of objects as points because there are very few statistical techniques which operate directly on line, area, or volume elements. Computer tools favor the spatial definition of objects as homogeneous and separate elements because of the limited number of database elements and computational structures available, and the ease with which these primitive structures can be created.

### Spatial dependency or auto-correlation

Spatial dependency is the co-variation of properties within geographic space: characteristics at proximal locations appear to be correlated, either positively or negatively. Spatial dependency leads to the spatial autocorrelation problem in statistics since, like temporal autocorrelation, this violates standard statistical techniques that assume independence among observations. For example, regression analyses that do not compensate for spatial dependency can have unstable parameter estimates and yield unreliable significance tests. Spatial regression models (see below) capture these relationships and do not suffer from these weaknesses. It is also appropriate to view spatial dependency as a source of information rather than something to be corrected.^{[2]}

Locational effects also manifest as spatial heterogeneity, or the apparent variation in a process with respect to location in geographic space. Unless a space is uniform and boundless, every location will have some degree of uniqueness relative to the other locations. This affects the spatial dependency relations and therefore the spatial process. Spatial heterogeneity means that overall parameters estimated for the entire system may not adequately describe the process at any given location.

### Scaling

Spatial measurement scale is a persistent issue in spatial analysis; more detail is available at the modifiable areal unit problem (MAUP) topic entry. Landscape ecologists developed a series of scale invariant metrics for aspects of ecology that are fractal in nature.^{[3]} In more general terms, no scale independent method of analysis is widely agreed upon for spatial statistics.

### Sampling

Spatial sampling involves determining a limited number of locations in geographic space for faithfully measuring phenomena that are subject to dependency and heterogeneity.^{[citation needed]} Dependency suggests that since one location can predict the value of another location, we do not need observations in both places. But heterogeneity suggests that this relation can change across space, and therefore we cannot trust an observed degree of dependency beyond a region that may be small. Basic spatial sampling schemes include random, clustered and systematic. These basic schemes can be applied at multiple levels in a designated spatial hierarchy (e.g., urban area, city, neighborhood). It is also possible to exploit ancillary data, for example, using property values as a guide in a spatial sampling scheme to measure educational attainment and income. Spatial models such as autocorrelation statistics, regression and interpolation (see below) can also dictate sample design.^{[citation needed]}

### Common errors in spatial analysis

The fundamental issues in spatial analysis lead to numerous problems in analysis including bias, distortion and outright errors in the conclusions reached. These issues are often interlinked but various attempts have been made to separate out particular issues from each other.^{[4]}

#### Length

In a paper by Benoit Mandelbrot on the coastline of Britain it was shown that it is inherently nonsensical to discuss certain spatial concepts despite an inherent presumption of the validity of the concept. Lengths in ecology depend directly on the scale at which they are measured and experienced. So while surveyors commonly measure the length of a river, this length only has meaning in the context of the relevance of the measuring technique to the question under study.

#### Locational fallacy

The locational fallacy refers to error due to the particular spatial characterization chosen for the elements of study, in particular choice of placement for the spatial presence of the element.

Spatial characterizations may be simplistic or even wrong. Studies of humans often reduce the spatial existence of humans to a single point, for instance their home address. This can easily lead to poor analysis, for example, when considering disease transmission which can happen at work or at school and therefore far from the home.

The spatial characterization may implicitly limit the subject of study. For example, the spatial analysis of crime data has recently become popular but these studies can only describe the particular kinds of crime which can be described spatially. This leads to many maps of assault but not to any maps of embezzlement with political consequences in the conceptualization of crime and the design of policies to address the issue.^{[5]}

#### Atomic fallacy

This describes errors due to treating elements as separate 'atoms' outside of their spatial context. The fallacy is about transferring individual conclusions to spatial units.^{[6]}

#### Ecological fallacy

The ecological fallacy describes errors due to performing analyses on aggregate data when trying to reach conclusions on the individual units.^{[citation needed]} Errors occur in part from spatial aggregation. For example, a pixel represents the average surface temperatures within an area. Ecological fallacy would be to assume that all points within the area have the same temperature. This topic is closely related to the modifiable areal unit problem.

### Solutions to the fundamental issues

#### Geographic space

A mathematical space exists whenever we have a set of observations and quantitative measures of their attributes. For example, we can represent individuals' incomes or years of education within a coordinate system where the location of each individual can be specified with respect to both dimensions. The distance between individuals within this space is a quantitative measure of their differences with respect to income and education. However, in spatial analysis, we are concerned with specific types of mathematical spaces, namely, geographic space. In geographic space, the observations correspond to locations in a spatial measurement framework that capture their proximity in the real world. The locations in a spatial measurement framework often represent locations on the surface of the Earth, but this is not strictly necessary. A spatial measurement framework can also capture proximity with respect to, say, interstellar space or within a biological entity such as a liver. The fundamental tenet is Tobler's First Law of Geography: if the interrelation between entities increases with proximity in the real world, then representation in geographic space and assessment using spatial analysis techniques are appropriate.

The Euclidean distance between locations often represents their proximity, although this is only one possibility. There are an infinite number of distances in addition to Euclidean that can support quantitative analysis. For example, "Manhattan" (or "Taxicab") distances where movement is restricted to paths parallel to the axes can be more meaningful than Euclidean distances in urban settings. In addition to distances, other geographic relationships such as connectivity** (e.g., the existence or degree of shared borders) and direction** can also influence the relationships among entities. It is also possible to compute minimal cost paths across a cost surface; for example, this can represent proximity among locations when travel must occur across rugged terrain.

## Types of spatial analysis

Spatial data comes in many varieties and it is not easy to arrive at a system of classification that is simultaneously exclusive, exhaustive, imaginative, and satisfying. -- G. Upton & B. Fingelton

^{[7]}

### Spatial data analysis

Urban and Regional Studies deal with large tables of spatial data obtained from censuses and surveys. It is necessary to simplify the huge amount of detailed information in order to extract the main trends. Multivariable analysis (or Factor analysis, FA) allows a change of variables, transforming the many variables of the census, usually correlated between themselves, into fewer independent "Factors" or "Principal Components" which are, actually, the eigenvectors of the data correlation matrix weighted by the inverse of their eigenvalues. This change of variables has two main advantages:

- Since information is concentrated on the first new factors, it is possible to keep only a few of them while losing only a small amount of information; mapping them produces fewer and more significant maps
- The factors, actually the eigenvectors, are orthogonal by construction, i.e. not correlated. In most cases, the dominant factor (with the largest eigenvalue) is the Social Component, separating rich and poor in the city. Since factors are not-correlated, other smaller processes than social status, which would have remained hidden otherwise, appear on the second, third, … factors.

Factor analysis depends on measuring distances between observations : the choice of a significant metric is crucial. The Euclidean metric (Principal Component Analysis), the Chi-Square distance (Correspondence Analysis) or the Generalized Mahalanobis distance (Discriminant Analysis ) are among the more widely used.^{[8]} More complicated models, using communalities or rotations have been proposed.^{[9]}

Using multivariate methods in spatial analysis began really in the 1950s (although some examples go back to the beginning of the century) and culminated in the 1970s, with the increasing power and accessibility of computers. Already in 1948, in a seminal publication, two sociologists, Bell and Shevky,^{[10]} had shown that most city populations in the USA and in the world could be represented with three independent factors : 1- the « socio-economic status » opposing rich and poor districts and distributed in sectors running along highways from the city center, 2- the « life cycle », i.e. the age structure of households, distributed in concentric circles, and 3- « race and ethnicity », identifying patches of migrants located within the city. In 1961, in a groundbreaking study, British geographers used FA to classify British towns.^{[11]} Brian J Berry, at the University of Chicago, and his students made a wide use of the method,^{[12]} applying it to most important cities in the world and exhibiting common social structures.^{[13]}
The use of Factor Analysis in Geography, made so easy by modern computers, has been very wide but not always very wise.^{[14]}

Since the vectors extracted are determined by the data matrix, it is not possible to compare factors obtained from different censuses. A solution consists in fusing together several census matrices in a unique table which, then, may be analyzed. This, however, assumes that the definition of the variables has not changed over time and produces very large tables, difficult to manage. A better solution, proposed by psychometricians,^{[15]} groups the data in a « cubic matrix », with three entries (for instance, locations, variables, time periods). A Three-Way Factor Analysis produces then three groups of factors related by a small cubic « core matrix ».^{[16]} This method, which exhibits data evolution over time, has not been widely used in geography.^{[17]} In Los Angeles,^{[18]} however, it has exhibited the role, traditionally ignored, of Downtown as an organizing center for the whole city during several decades.

### Spatial autocorrelation

Spatial autocorrelation statistics measure and analyze the degree of dependency among observations in a geographic space. Classic spatial autocorrelation statistics include Moran's , Geary's , Getis's and the standard deviational ellipse. These statistics require measuring a spatial weights matrix that reflects the intensity of the geographic relationship between observations in a neighborhood, e.g., the distances between neighbors, the lengths of shared border, or whether they fall into a specified directional class such as "west". Classic spatial autocorrelation statistics compare the spatial weights to the covariance relationship at pairs of locations. Spatial autocorrelation that is more positive than expected from random indicate the clustering of similar values across geographic space, while significant negative spatial autocorrelation indicates that neighboring values are more dissimilar than expected by chance, suggesting a spatial pattern similar to a chess board.

Spatial autocorrelation statistics such as Moran's and Geary's are global in the sense that they estimate the overall degree of spatial autocorrelation for a dataset. The possibility of spatial heterogeneity suggests that the estimated degree of autocorrelation may vary significantly across geographic space. **Local spatial autocorrelation statistics** provide estimates disaggregated to the level of the spatial analysis units, allowing assessment of the dependency relationships across space. statistics compare neighborhoods to a global average and identify local regions of strong autocorrelation. Local versions of the and statistics are also available.

### Spatial stratified heterogeneity

Spatial stratified heterogeneity, referring to the within-strata variance less than the between strata-variance, is ubiquitous in ecological phenomena, such as ecological zones and many ecological variables. Spatial stratified heterogeneity reflects the essence of nature, implies potential distinct mechanisms by strata, suggests possible determinants of the observed process, allows the representativeness of observations of the earth, and enforces the applicability of statistical inferences. Spatial stratified heterogeneity of an attribute can be measured by geographical detector *q*-statistic:^{[19]}

```
```

where a population is partitioned into *h* = 1, ..., *L* strata; *N* stands for the size of the population, σ^{2} stands for variance of the attribute. The value of *q* is within [0, 1], 0 indicates no spatial stratified heterogeneity, 1 indicates perfect spatial stratified heterogeneity.The value of *q* indicates the percent of the variance of an attribute explained by the stratification.The *q* follows a noncentral *F* probability density function.

### Spatial interpolation

Spatial interpolation methods estimate the variables at unobserved locations in geographic space based on the values at observed locations. Basic methods include inverse distance weighting: this attenuates the variable with decreasing proximity from the observed location. Kriging is a more sophisticated method that interpolates across space according to a spatial lag relationship that has both systematic and random components. This can accommodate a wide range of spatial relationships for the hidden values between observed locations. Kriging provides optimal estimates given the hypothesized lag relationship, and error estimates can be mapped to determine if spatial patterns exist.

### Spatial regression

Spatial regression methods capture spatial dependency in regression analysis, avoiding statistical problems such as unstable parameters and unreliable significance tests, as well as providing information on spatial relationships among the variables involved. The estimated spatial relationships can be used on spatial and spatio-temporal predictions.^{[20]} Depending on the specific technique, spatial dependency can enter the regression model as relationships between the independent variables and the dependent, between the dependent variables and a spatial lag of itself, or in the error terms. **Geographically weighted regression** (GWR) is a local version of spatial regression that generates parameters disaggregated by the spatial units of analysis.^{[21]} This allows assessment of the spatial heterogeneity in the estimated relationships between the independent and dependent variables. The use of Bayesian hierarchical modeling^{[22]} in conjunction with Markov Chain Monte Carlo (MCMC) methods have recently shown to be effective in modeling complex relationships using Poisson-Gamma-CAR, Poisson-lognormal-SAR, or Overdispersed logit models.
Spatial stochastic processes, such as Gaussian processes are also increasingly being deployed in spatial regression analysis. Model-based versions of GWR, known as spatially varying coefficient models have been applied to conduct Bayesian inference.^{[22]} Spatial stochastic process can become computationally effective and scalable Gaussian process models, such as Gaussian Predictive Processes^{[23]} and Nearest Neighbor Gaussian Processes (NNGP).^{[24]}

### Spatial interaction

Spatial interaction or "gravity models" estimate the flow of people, material or information between locations in geographic space. Factors can include origin propulsive variables such as the number of commuters in residential areas, destination attractiveness variables such as the amount of office space in employment areas, and proximity relationships between the locations measured in terms such as driving distance or travel time. In addition, the topological, or connective, relationships between areas must be identified, particularly considering the often conflicting relationship between distance and topology; for example, two spatially close neighborhoods may not display any significant interaction if they are separated by a highway. After specifying the functional forms of these relationships, the analyst can estimate model parameters using observed flow data and standard estimation techniques such as ordinary least squares or maximum likelihood. Competing destinations versions of spatial interaction models include the proximity among the destinations (or origins) in addition to the origin-destination proximity; this captures the effects of destination (origin) clustering on flows. Computational methods such as artificial neural networks can also estimate spatial interaction relationships among locations and can handle noisy and qualitative data.^{[citation needed]}

### Simulation and modeling

Spatial interaction models are aggregate and top-down: they specify an overall governing relationship for flow between locations. This characteristic is also shared by urban models such as those based on mathematical programming, flows among economic sectors, or bid-rent theory. An alternative modeling perspective is to represent the system at the highest possible level of disaggregation and study the bottom-up emergence of complex patterns and relationships from behavior and interactions at the individual level.^{[citation needed]}

Complex adaptive systems theory as applied to spatial analysis suggests that simple interactions among proximal entities can lead to intricate, persistent and functional spatial entities at aggregate levels. Two fundamentally spatial simulation methods are cellular automata and agent-based modeling. Cellular automata modeling imposes a fixed spatial framework such as grid cells and specifies rules that dictate the state of a cell based on the states of its neighboring cells. As time progresses, spatial patterns emerge as cells change states based on their neighbors; this alters the conditions for future time periods. For example, cells can represent locations in an urban area and their states can be different types of land use. Patterns that can emerge from the simple interactions of local land uses include office districts and urban sprawl. Agent-based modeling uses software entities (agents) that have purposeful behavior (goals) and can react, interact and modify their environment while seeking their objectives. Unlike the cells in cellular automata, simulysts can allow agents to be mobile with respect to space. For example, one could model traffic flow and dynamics using agents representing individual vehicles that try to minimize travel time between specified origins and destinations. While pursuing minimal travel times, the agents must avoid collisions with other vehicles also seeking to minimize their travel times. Cellular automata and agent-based modeling are complementary modeling strategies. They can be integrated into a common geographic automata system where some agents are fixed while others are mobile.

Calibration plays a pivotal role in both CA and ABM simulation and modelling approaches. Initial approaches to CA proposed robust calibration approaches based on stochastic, Monte Carlo methods.^{[25]}^{[26]} ABM approaches rely on agents' decision rules (in many cases extracted from qualitative research base methods such as questionnaires).^{[27]} Recent Machine Learning Algorithms calibrate using training sets, for instance in order to understand the qualities of the built environment.^{[28]}

### Multiple-point geostatistics (MPS)

Spatial analysis of a conceptual geological model is the main purpose of any MPS algorithm. The method analyzes the spatial statistics of the geological model, called the training image, and generates realizations of the phenomena that honor those input multiple-point statistics.

A recent MPS algorithm used to accomplish this task is the pattern-based method by Honarkhah.^{[29]} In this method, a distance-based approach is employed to analyze the patterns in the training image. This allows the reproduction of the multiple-point statistics, and the complex geometrical features of the training image. Each output of the MPS algorithm is a realization that represents a random field. Together, several realizations may be used to quantify spatial uncertainty.

One of the recent methods is presented by Tahmasebi et al.^{[30]} uses a cross-correlation function to improve the spatial pattern reproduction. They call their MPS simulation method as the CCSIM algorithm. This method is able to quantify the spatial connectivity, variability and uncertainty. Furthermore, the method is not sensitive to any type of data and is able to simulate both categorical and continuous scenarios. CCSIM algorithm is able to be used for any stationary, non-stationary and multivariate systems and it can provide high quality visual appeal model.,^{[31]}^{[32]}

## Geospatial analysis

**Geospatial analysis**, or just **spatial analysis**,^{[33]} is an approach to applying statistical analysis and other analytic techniques to data which has a geographical or spatial aspect ^{[34]}. Such analysis would typically employ software capable of rendering maps processing spatial data, and applying analytical methods to terrestrial or geographic datasets, including the use of geographic information systems and geomatics.^{[35]}^{[36]}^{[37]}

### Geographical information system usage

Geographic information systems (GIS) — a large domain that provides a variety of capabilities designed to capture, store, manipulate, analyze, manage, and present all types of geographical data — utilizes geospatial analysis in a variety of contexts, operations and applications.

#### Basic applications

Geospatial analysis, using GIS, was developed for problems in the environmental and life sciences, in particular ecology, geology and epidemiology. It has extended to almost all industries including defense, intelligence, utilities, Natural Resources (i.e. Oil and Gas, Forestry ... etc.), social sciences, medicine and Public Safety (i.e. emergency management and criminology), disaster risk reduction and management (DRRM), and climate change adaptation (CCA). Spatial statistics typically result primarily from observation rather than experimentation.

#### Basic operations

Vector-based GIS is typically related to operations such as map overlay (combining two or more maps or map layers according to predefined rules), simple buffering (identifying regions of a map within a specified distance of one or more features, such as towns, roads or rivers) and similar basic operations. This reflects (and is reflected in) the use of the term spatial analysis within the Open Geospatial Consortium (OGC) “simple feature specifications”. For raster-based GIS, widely used in the environmental sciences and remote sensing, this typically means a range of actions applied to the grid cells of one or more maps (or images) often involving filtering and/or algebraic operations (map algebra). These techniques involve processing one or more raster layers according to simple rules resulting in a new map layer, for example replacing each cell value with some combination of its neighbours’ values, or computing the sum or difference of specific attribute values for each grid cell in two matching raster datasets. Descriptive statistics, such as cell counts, means, variances, maxima, minima, cumulative values, frequencies and a number of other measures and distance computations are also often included in this generic term spatial analysis. Spatial analysis includes a large variety of statistical techniques (descriptive, exploratory, and explanatory statistics) that apply to data that vary spatially and which can vary over time. Some more advanced statistical techniques include Getis-ord Gi* or Anselin Local Moran's I which are used to determine clustering patterns of spatially referenced data.

#### Advanced operations

Geospatial analysis goes beyond 2D and 3D mapping operations and spatial statistics. It includes:

- Surface analysis — in particular analysing the properties of physical surfaces, such as gradient, aspect and visibility, and analysing surface-like data “fields”;
- Network analysis — examining the properties of natural and man-made networks in order to understand the behaviour of flows within and around such networks; and locational analysis. GIS-based network analysis may be used to address a wide range of practical problems such as route selection and facility location (core topics in the field of operations research, and problems involving flows such as those found in hydrology and transportation research. In many instances location problems relate to networks and as such are addressed with tools designed for this purpose, but in others existing networks may have little or no relevance or may be impractical to incorporate within the modeling process. Problems that are not specifically network constrained, such as new road or pipeline routing, regional warehouse location, mobile phone mast positioning or the selection of rural community health care sites, may be effectively analysed (at least initially) without reference to existing physical networks. Locational analysis "in the plane" is also applicable where suitable network datasets are not available, or are too large or expensive to be utilised, or where the location algorithm is very complex or involves the examination or simulation of a very large number of alternative configurations.
- Geovisualization — the creation and manipulation of images, maps, diagrams, charts, 3D views and their associated tabular datasets. GIS packages increasingly provide a range of such tools, providing static or rotating views, draping images over 2.5D surface representations, providing animations and fly-throughs, dynamic linking and brushing and spatio-temporal visualisations. This latter class of tools is the least developed, reflecting in part the limited range of suitable compatible datasets and the limited set of analytical methods available, although this picture is changing rapidly. All these facilities augment the core tools utilised in spatial analysis throughout the analytical process (exploration of data, identification of patterns and relationships, construction of models, and communication of results)

#### Mobile Geospatial Computing

Traditionally geospatial computing has been performed primarily on personal computers (PCs) or servers. Due to the increasing capabilities of mobile devices, however, geospatial computing in mobile devices is a fast-growing trend.^{[38]} The portable nature of these devices, as well as the presence of useful sensors, such as Global Navigation Satellite System (GNSS) receivers and barometric pressure sensors, make them useful for capturing and processing geospatial information in the field. In addition to the local processing of geospatial information on mobile devices, another growing trend is cloud-based geospatial computing. In this architecture, data can be collected in the field using mobile devices and then transmitted to cloud-based servers for further processing and ultimate storage. In a similar manner, geospatial information can be made available to connected mobile devices via the cloud, allowing access to vast databases of geospatial information anywhere where a wireless data connection is available.

### Geographic information science and spatial analysis

**Geographic information systems** (GIS) and the underlying geographic information science that advances these technologies have a strong influence on spatial analysis. The increasing ability to capture and handle geographic data means that spatial analysis is occurring within increasingly data-rich environments. Geographic data capture systems include remotely sensed imagery, environmental monitoring systems such as intelligent transportation systems, and location-aware technologies such as mobile devices that can report location in near-real time. GIS provide platforms for managing these data, computing spatial relationships such as distance, connectivity and directional relationships between spatial units, and visualizing both the raw data and spatial analytic results within a cartographic context.

#### Content

- Spatial location: Transfer positioning information of space objects with the help of space coordinate system. Projection transformation theory is the foundation of spatial object representation.
- Spatial distribution: the similar spatial object groups positioning information, including distribution, trends, contrast etc..
- Spatial form: the geometric shape of the spatial objects
- Spatial space: the space objects' approaching degree
- Spatial relationship: relationship between spatial objects, including topological, orientation, similarity, etc..

**Geovisualization** (GVis) combines scientific visualization with digital cartography to support the exploration and analysis of geographic data and information, including the results of spatial analysis or simulation. GVis leverages the human orientation towards visual information processing in the exploration, analysis and communication of geographic data and information. In contrast with traditional cartography, GVis is typically three- or four-dimensional (the latter including time) and user-interactive.

**Geographic knowledge discovery** (GKD) is the human-centered process of applying efficient computational tools for exploring massive spatial databases. GKD includes geographic data mining, but also encompasses related activities such as data selection, data cleaning and pre-processing, and interpretation of results. GVis can also serve a central role in the GKD process. GKD is based on the premise that massive databases contain interesting (valid, novel, useful and understandable) patterns that standard analytical techniques cannot find. GKD can serve as a hypothesis-generating process for spatial analysis, producing tentative patterns and relationships that should be confirmed using spatial analytical techniques.

**Spatial decision support systems** (SDSS) take existing spatial data and use a variety of mathematical models to make projections into the future. This allows urban and regional planners to test intervention decisions prior to implementation.^{[39]}

## See also

- General topics

- Cartography
- Complete spatial randomness
- GeoComputation
- Geospatial intelligence
- Geospatial predictive modeling
- Dimensionally Extended nine-Intersection Model (DE-9IM)
- Geographic information science
- Mathematical statistics
- Modifiable areal unit problem
- Spatial autocorrelation
- Spatial relation
- List of spatial analysis software

- Specific applications

## References

**^**Mark Monmonier*How to Lie with Maps*University of Chicago Press, 1996.**^**Knegt, De; Coughenour, M.B.; Skidmore, A.K.; Heitkönig, I.M.A.; Knox, N.M.; Slotow, R.; Prins, H.H.T. (2010). "Spatial autocorrelation and the scaling of species–environment relationships".*Ecology*.**91**: 2455–2465. doi:10.1890/09-1359.1.**^**Halley, J. M.; Hartley, S.; Kallimanis, A. S.; Kunin, W. E.; Lennon, J. J.; Sgardelis, S. P. (2004-03-01). "Uses and abuses of fractal methodology in ecology".*Ecology Letters*.**7**(3): 254–271. doi:10.1111/j.1461-0248.2004.00568.x. ISSN 1461-0248.**^**Ocaña-Riola, R (2010). "Common errors in disease mapping".*Geospatial Health*.**4**(2): 139–154. doi:10.4081/gh.2010.196. PMID 20503184.**^**"Understanding Spatial Fallacies".*The Learner's Guide to Geospatial Analysis*. Penn State Department of Geography. Retrieved 27 April 2018.**^**A.,, Quattrochi, Dale.*Integrating scale in remote sensing and GIS*. ISBN 9781482218268. OCLC 973767077.**^**Graham J. Upton & Bernard Fingelton:**Spatial Data Analysis by Example Volume 1: Point Pattern and Quantitative Data**John Wiley & Sons, New York. 1985.**^**Harman H H (1960)*Modern Factor Analysis*, University of Chicago Press**^**Rummel R J (1970)*Applied Factor Analysis*. Evanston, ILL: Northwestern University Press.**^**Bell W & E Shevky (1955)*Social Area Analysis*, Stanford University Press**^**Moser C A & W Scott (1961)*British Towns ; A Statistical Study of their Social and Economic Differences*, Oliver & Boyd, London.**^**Berry B J & F Horton (1971)*Geographic Perspectives on Urban Systems*, John Wiley, N-Y.**^**Berry B J & K B Smith eds (1972)*City Classification Handbook : Methods and Applications*, John Wiley, N-Y.**^**Ciceri M-F (1974)*Méthodes d’analyse multivariée dans la géographie anglo-saxonne*, Université de Paris-1 ; free download on http://www-ohp.univ-paris1.fr**^**Tucker L R (1964) « The extension of Factor Analysis to three-dimensional matrices », in Frederiksen N & H Gulliksen eds,*Contributions to Mathematical Psychology*, Holt, Rinehart and Winston, NY.**^**R. Coppi & S. Bolasco, eds. (1989),*Multiway data analysis*, Elsevier, Amsterdam.**^**Cant, R.G. (1971). "Changes in the location of manufacturing in New Zealand 1957-1968: An application of three-mode factor analysis".*New Zealand Geographer*.**27**: 38–55. doi:10.1111/j.1745-7939.1971.tb00636.x.**^**Marchand B (1986)*The Emergence of Los Angeles, 1940-1970*, Pion Ltd, London**^**Wang, JF; Zhang, TL; Fu, BJ (2016). "A measure of spatial stratified heterogeneity".*Ecological Indicators*.**67**: 250–256. doi:10.1016/j.ecolind.2016.02.052.**^**Song, Yongze; Yong Ge. "Spatial distribution estimation of malaria in northern China and its scenarios in 2020, 2030, 2040 and 2050".*Malaria Journal*. doi:10.1186/s12936-016-1395-2.**^**Fotheringham, A. S.; Charlton, M. E.; Brunsdon, C. (1998). "Geographically weighted regression: a natural evolution of the expansion method for spatial data analysis".*Environment and Planning A*.**30**(11): 1905–1927. doi:10.1068/a301905.- ^
^{a}^{b}Banerjee, Sudipto; Carlin, Bradley P.; Gelfand, Alan E. (2014),*Hierarchical Modeling and Analysis for Spatial Data, Second Edition*, Monographs on Statistics and Applied Probability (2nd ed.), Chapman and Hall/CRC, ISBN 9781439819173 **^**Banerjee, Sudipto; Gelfand, Alan E.; Finley, Andrew O.; Sang, Huiyan (2008). "Gaussian predictive process models for large spatial datasets".*Journal of the Royal Statistical Society, Series B*.**70**(4): 825–848. doi:10.1111/j.1467-9868.2008.00663.x.**^**Datta, Abhirup; Banerjee, Sudipto; Finley, Andrew O.; Gelfand, Alan E. (2016). "Hierarchical Nearest Neighbor Gaussian Process Models for Large Geostatistical Datasets".*Journal of the American Statistical Association*. arXiv:1406.7343 . doi:10.1080/01621459.2015.1044091.**^**Silva, E. A.; Clarke, K.C. (2002). "Calibration of the SLEUTH urban growth model for Lisbon and Porto, Portugal".*Computers, Environment and Urban Systems*.**26**(6): 525–552. doi:10.1016/S0198-9715(01)00014-X.**^**Silva, E A (2003). "Complexity, emergence and cellular urban models: lessons learned from applying SLEUTH to two Portuguese metropolitan areas".*European Planning Studies*.**13**(1): 93–115. doi:10.1080/0965431042000312424.**^**Liu and Silva (2017). "Examining the dynamics of the interaction between the development of creative industries and urban spatial structure by agent-based modelling: A case study of Nanjing, China".*Urban Studies*.**65**: 113–125. doi:10.1177/0042098016686493.**^**Liu, Lun; Silva, Elisabete A.; Wu, Chunyang; Wang, Hui (2017). "A machine learning-based method for the large-scale evaluation of the qualities of the urban environment".*Computers environment and Urban Systems*.**65**: 113–125. doi:10.1016/j.compenvurbsys.2017.06.003.**^**Honarkhah, M; Caers, J (2010). "Stochastic Simulation of Patterns Using Distance-Based Pattern Modeling".*Mathematical Geosciences*.**42**: 487–517. doi:10.1007/s11004-010-9276-7.**^**Tahmasebi, P.; Hezarkhani, A.; Sahimi, M. (2012). "Multiple-point geostatistical modeling based on the cross-correlation functions".*Computational Geosciences*.**16**(3): 779–79742. doi:10.1007/s10596-012-9287-1.**^**Tahmasebi, P.; Sahimi, M. (2015). "Reconstruction of nonstationary disordered materials and media: Watershed transform and cross-correlation function".*Physical Review E*.**91**(3). Bibcode:2015PhRvE..91c2401T. doi:10.1103/PhysRevE.91.032401.**^**Tahmasebi, P.; Sahimi, M. (2015). "Geostatistical Simulation and Reconstruction of Porous Media by a Cross-Correlation Function and Integration of Hard and Soft Data".*Transport in Porous Media*.**107**(3): 871–905. doi:10.1007/s11242-015-0471-3.**^**"Graduate Program in Spatial Analysis".*Ryerson University*. Ryerson University. Retrieved 17 December 2015.**^**Hemakumara, GPTS, & Rainis, Ruslan. (2015). Geo-statistical modeling to evaluate the socio-economic impacts of households in the context of low-lying areas conversion in Colombo metropolitan region-Sri Lanka. Paper presented at the AIP Conference Proceedings.**^**geospatial. Collins English Dictionary - Complete & Unabridged 11th Edition. Retrieved 5tth August 2012 from CollinsDictionary.com website: http://www.collinsdictionary.com/dictionary/english/geospatial**^**Dictionary.com's 21st Century Lexicon Copyright © 2003-2010 Dictionary.com, LLC http://dictionary.reference.com/browse/geospatial**^**The geospatial web – blending physical and virtual spaces. Archived 2011-10-02 at the Wayback Machine., Arno Scharl in receiver magazine, Autumn 2008**^**Chen, Ruizhi; Guinness, Robert E. (2014).*Geospatial Computing in Mobile Devices*(1st ed.). Norwood, MA: Artech House. p. 228. ISBN 978-1-60807-565-2. Retrieved 1 July 2014.**^**González, Ainhoa; Donnelly, Alison; Jones, Mike; Chrysoulakis, Nektarios; Lopes, Myriam (2012). "A decision-support system for sustainable urban metabolism in Europe".*Environmental Impact Assessment Review*.**38**: 109–119. doi:10.1016/j.eiar.2012.06.007.

## Further reading

This article's further reading may not follow Wikipedia's content policies or guidelines. Please improve this article by removing less relevant or redundant publications with the same point of view; or by incorporating the relevant publications into the body of the article through appropriate citations. (June 2014) (Learn how and when to remove this template message) |

- Abler, R., J. Adams, and P. Gould (1971)
*Spatial Organization–The Geographer's View of the World*, Englewood Cliffs, NJ: Prentice-Hall. - Anselin, L. (1995) "Local indicators of spatial association – LISA".
*Geographical Analysis*, 27, 93–115. - Awange, Joseph; Paláncz, Béla (2016).
*Geospatial Algebraic Computations, Theory and Applications, Third Edition*. New York: Springer. ISBN 978-3319254630. - Banerjee, Sudipto; Carlin, Bradley P.; Gelfand, Alan E. (2014),
*Hierarchical Modeling and Analysis for Spatial Data, Second Edition*, Monographs on Statistics and Applied Probability (2nd ed.), Chapman and Hall/CRC, ISBN 9781439819173 - Benenson, I. and P. M. Torrens. (2004).
*Geosimulation: Automata-Based Modeling of Urban Phenomena.*Wiley. - Fotheringham, A. S., C. Brunsdon and M. Charlton (2000)
*Quantitative Geography: Perspectives on Spatial Data Analysis*, Sage. - Fotheringham, A. S. and M. E. O'Kelly (1989)
*Spatial Interaction Models: Formulations and Applications*, Kluwer Academic - Fotheringham, A. S.; Rogerson, P. A. (1993). "GIS and spatial analytical problems".
*International Journal of Geographical Information Systems*.**7**: 3–19. doi:10.1080/02693799308901936. - Goodchild, M. F. (1987). "A spatial analytical perspective on geographical information systems".
*International Journal of Geographical Information Systems*.**1**: 327–44. doi:10.1080/02693798708927820. - MacEachren, A. M. and D. R. F. Taylor (eds.) (1994)
*Visualization in Modern Cartography*, Pergamon. - Levine, N. (2010).
*CrimeStat: A Spatial Statistics Program for the Analysis of Crime Incident Locations*. Version 3.3. Ned Levine & Associates, Houston, TX and the National Institute of Justice, Washington, DC. Ch. 1-17 + 2 update chapters [1] - Miller, H. J. (2004). "Tobler's First Law and spatial analysis".
*Annals of the Association of American Geographers*.**94**: 284–289. doi:10.1111/j.1467-8306.2004.09402005.x. - Miller, H. J. and J. Han (eds.) (2001)
*Geographic Data Mining and Knowledge Discovery*, Taylor and Francis. - O'Sullivan, D. and D. Unwin (2002)
*Geographic Information Analysis*, Wiley. - Parker, D. C.; Manson, S. M.; Janssen, M.A.; Hoffmann, M. J.; Deadman, P. (2003). "Multi-agent systems for the simulation of land-use and land-cover change: A review".
*Annals of the Association of American Geographers*.**93**: 314–337. doi:10.1111/1467-8306.9302004. - White, R.; Engelen, G. (1997). "Cellular automata as the basis of integrated dynamic regional modelling".
*Environment and Planning B: Planning and Design*.**24**: 235–246. doi:10.1068/b240235. - Scheldeman, X. & van Zonneveld, M. (2010).
*Training Manual on Spatial Analysis of Plant Diversity and Distribution*. Bioversity International. - Fisher MM, Leung Y (2001) Geocomputational Modelling: techniques and applications. Springer Verlag, Berlin
- Fotheringham, S; Clarke, G; Abrahart, B (1997). "Geocomputation and GIS".
*Transactions in GIS*.**2**: 199–200. doi:10.1111/j.1467-9671.1997.tb00010.x. - Openshaw S and Abrahart RJ (2000) GeoComputation. CRC Press
- Diappi L (2004) Evolving Cities: Geocomputation in Territorial Planning. Ashgate, England
- Longley PA, Brooks SM, McDonnell R, Macmillan B (1998), Geocomputation, a primer. John Wiley and Sons, Chichester
- Ehlen, J; Caldwell, DR; Harding, S (2002). "GeoComputation: what is it?".
*Comput Environ and Urban Syst*.**26**: 257–265. doi:10.1016/s0198-9715(01)00047-3. - Gahegan, M (1999). "What is Geocomputation?".
*Transaction in GIS*.**3**: 203–206. doi:10.1111/1467-9671.00017. - Murgante B., Borruso G., Lapucci A. (2009) "Geocomputation and Urban Planning"
*Studies in Computational Intelligence*, Vol. 176. Springer-Verlag, Berlin. - Reis, J. Silva, E.A., Pinho, P (2015) "Spatial metrics to study urban patterns in growing and shrinking cities"
*Urban Geography*, Urban Geography. 37 (2): 246-271. Doi. 10.1080/02723638.2015.1096118 - Fischer M., Leung Y. (2010) "GeoComputational Modelling: Techniques and Applications" Advances in Spatial Science. Springer-Verlag, Berlin.
- Murgante B., Borruso G., Lapucci A. (2011) "Geocomputation, Sustainability and Environmental Planning"
*Studies in Computational Intelligence*, Vol. 348. Springer-Verlag, Berlin. - Tahmasebi, P.; Hezarkhani, A.; Sahimi, M. (2012). "Multiple-point geostatistical modeling based on the cross-correlation functions".
*Computational Geosciences*.**16**(3): 779–79742. doi:10.1007/s10596-012-9287-1. - Tóth, G., Kincses, Á., Nagy, Z., (2014) European Spatial Structure LAP LAMBERT Academic Publishing, ISBN 978-3-659-64559-4, doi:10.13140/2.1.1560.2247

## External links

Wikimedia Commons has media related to .Spatial data analysis |

- ICA Commission on Geospatial Analysis and Modeling
- An educational resource about spatial statistics and geostatistics
- A comprehensive guide to principles, techniques & software tools
- Social and Spatial Inequalities
- National Center for Geographic Information and Analysis (NCGIA)
- International Cartographic Association (ICA), the world body for mapping and GIScience professionals