In geometry, a **generalized helicoid** is a surface in Euclidean space generated by rotating and simultaneously displacing a curve, the *profile curve*, along a line, its *axis*. Any point of the given curve is the starting point of a circular helix. If the profile curve is contained in a plane through the axis, it is called the **meridian** of the generalized helicoid. Simple examples of generalized helicoids are the helicoids. The meridian of a helicoid is a line which intersects the axis orthogonally.

Essential types of generalized helicoids are

**ruled generalized helicoids**. Their profile curves are lines and the surfaces are ruled surfaces.**circular generalized helicoids**. Their profile curves are circles.

In mathematics helicoids play an essential role as minimal surfaces. In the technical area generalized helicoids are used for staircases, slides, screws, and pipes.

## Analytical representation

### Screw motion of a point

Moving a point on a screwtype curve means, the point is rotated and displaced along a line (axis) such that the displacement is proportional to the rotation-angle. The result is a circular helix.

If the axis is the *z*-axis, the motion of a point can be described parametrically by

is called *slant*, the angle , measured in radian, is called the *screw angle* and the *pitch* (green). The trace of the point is a *circular helix* (red). It is contained in the surface of a right circular cylinder. Its radius is the distance of point to the *z*-axis.

In case of , the helix is called *right handed* otherwise *left handed*.
(In case of the motion is a rotation around the *z*-axis).

### Screw motion of a curve

The screw motion of curve

yields a generalized helicoid with the parametric representation

The curves are circular helices.

The curves are copies of the given profile curve.

**Example:** For the first picture above, the meridian is a *parabola*.

## Ruled generalized helicoids

### Types

If the profile curve is a line one gets a *ruled generalized helicoid*. There are four types:

**(1)**The line intersects the axis orthogonally. One gets a**helicoid**(*closed right*ruled generalized helicoid).**(2)**The line intersects the axis, but*not*orthogonally. One gets an**oblique closed**type.

If the given line and the axis are skew lines one gets an **open** type and the axis is not part of the surface (s. picture).

**(3)**If the given line and the axis are skew lines and the line is contained in a plane orthogonally to the axis one gets a**right open**type or shortly**open helicoid**.**(4)**If the line and the axis are skew and the line is*not*contained in ... (s. 3) one gets an**oblique open**type.

Oblique types do *intersect themselves* (s. picture), *right* types (helicoids) do not.

One gets an interesting case, if the line is skew to the axis and the product of its distance to the axis and its slope is exactly . In this case the surface is a tangent developable surface and is generated by the directrix .

*Remark:*

- The (open and closed) helicoids are Catalan surfaces. The closed type (common helicoid) is even a conoid
- Ruled generalized helicoids are not algebraic surfaces.

### On closed ruled generalized helicoids

A closed ruled generalized helicoid has a profile line that intersects the axis. If the profile line is described by one gets the following parametric representation

If (common helicoid) the surface does *not* intersect itself.

If (oblique type) the surface intersects itself and the curves (on the surface)

- with

consist of *double points*. There exist infinite double curves. The smaller the greater are the distances between the double curves.

### On the tangent developable type

For the directrix (a helix)

one gets the following parametric representation of the tangent developable surface:

The surface normal vector is

For the normal vector is the null vector. Hence the directrix consists of singular points. The directrix separates two regular parts of the surface (s. picture).

## Circular generalized helicoids

There are 3 interesting types of circular generalized helicoids:

**(1)**If the circle is a meridian and does not intersect the axis (s. picture).**(2)**The plane that contains the circle is orthogonal to the helix of the circle centers. One gets a pipe surface**(3)**The circle's plane is orthogonal to the axis and comprises the axis point in it (s. picture). This type was used for baroque-columns.

## See also

## External links

- Gfrerrer:
*Kurven und Flächen*, S. 47 - mathcurve.com: circular generalized helicoid
- mathcurve.com: developable generalized helicoid
- mathcurve.com: ruled generalized helicoid
- K3Dsurf: 3d surface generator

## References

- Elsa Abbena,Simon Salamon,Alfred Gray:
*Modern Differential Geometry of Curves and Surfaces with Mathematica*,3. edition, studies in advanced mathematics, Chapman & Hall, 2006, ISBN 1584884487, p. 470 - E. Kreyszig:
*Differential Geometry*. New York: Dover, p. 88, 1991. - U. Graf, M. Barner:
*Darstellende Geometrie.*Quelle & Meyer, Heidelberg 1961, ISBN 3-494-00488-9, p.218 - K. Strubecker:
*Vorlesungen über Darstellende Geometrie*, Vandenhoek & Ruprecht, Göttingen, 1967, p. 286