|National origin||United States|
|First run||March 1993|
|Major applications||Boeing 777|
|Number built||Over 2,600|
|Program cost||$2 billion, high thrust: $500 million|
|Unit cost||US$27.5 million list price (2011)|
|Developed into||General Electric GEnx |
Engine Alliance GP7000
General Electric GE9X
The General Electric GE90 is a family of high-bypass turbofan aircraft engines built by GE Aviation for the Boeing 777, with thrust ratings from 81,000 to 115,000 lbf (360 to 510 kN). It entered service with British Airways in November 1995. It is one of three options for the 777-200, -200ER, and -300 versions, and the exclusive engine of the -200LR, -300ER, and 777F. It is the world's largest and most powerful jet engine. Its 6 in (15 cm) wider fan successor, the 105,000 lbf (470 kN) GE9X, is expected to power the Boeing 777X from 2019.
The GE90 was developed from the NASA 1970s Energy Efficient Engine. GE's GE36 UDF (propfan) was meant to replace the CFM International CFM56 high-bypass turbofan which was initially noncompetitive against the rival IAE V2500. However, when the V2500 ran into technical problems, sales of the CFM56 took off. GE was not interested in having the GE36 cannibalize the CFM56, and while "the UDF could be made reliable by earlier standards, turbofans were getting much, much better than that." However, GE integrated the UDF's blade technology directly into the GE90.
The GE90 engine was launched in 1990. GE Aviation teamed with Snecma (France, 24%), IHI (Japan) and Avio (Italy) for the program. Initially the GE90 was only one of three 777 options and GE Aviation then-CEO Brian H. Rowe would have paid for the development of putting it on an A330, but Airbus' strategy for long-haul was the four-engine A340, missing the market favouring twins.
The GE90's 10-stage high-pressure compressor develops an industry record pressure ratio of 23:1 and is driven by a 2-stage, air-cooled, HP turbine. A 3-stage low-pressure compressor, situated directly behind the fan, supercharges the core. The fan/LPC is driven by a 6-stage low-pressure turbine.
The higher-thrust variants, GE90-110B1 and -115B, have a different architecture from the earlier GE90 versions, with one stage removed from the HP compressor and an extra stage added to the LP compressor. A net increase in core flow was achieved. General Electric performed a similar re-staging exercise when they upgraded the CF6 from the -6 to the higher-thrust -50. However, this thrust growth route is expensive, since all the downstream components (e.g. turbines) must be larger for flow capacity. The fan is an advanced, larger diameter unit made from composite materials and is the first production engine to feature swept rotor blades. Its nacelle has a maximum diameter of 166 in (4,200 mm).
As one of the three available engines for the new Boeing 777, the GE90 was an all-new $2 billion design meant to handle transoceanic routes, in contrast to the offerings from Pratt & Whitney and Rolls-Royce which were modifications of existing engines.
The first General Electric-powered Boeing 777 was delivered to British Airways on November 12, 1995. The aircraft, with two GE90-77Bs, entered service five days later. Initial service was affected by gearbox bearing wear concerns, which caused the airline to temporarily withdraw its 777 fleet from transatlantic service in 1997. British Airways' aircraft returned to full service later that year.
Problems with GE90 development and testing caused delays in Federal Aviation Administration certification. In addition the GE90's increased output was not yet put to use by airlines and it was also the heaviest engine of the three available choices, making it the least popular option while Rolls-Royce held the top spot. British Airways soon replaced the GE90 with Rolls-Royce engines on their 777s.
For Boeing's second-generation 777 long-range versions (later named 777-200LR, 777-300ER, and 777F), greater thrust was needed to meet the specifications. General Electric and Pratt & Whitney insisted on a winner-take-all contract due to the $500 million investment in engine modifications needed to meet the requirements. GE received sole engine supplier status for the higher-thrust engine variants for the 777-200LR, -300ER, and 777F.
The higher-output GE90-110B1 and -115B engines, in combination with the second-generation 777 variants -200LR and -300ER, has been a primary driver of the twinjet's sales past the rival A330/340 series. Using two engines produces a typical operating cost advantage of around 8–9% for the -300ER over the A340-600. The 777-300ER has also been seen as a 747-400 replacement amid rising fuel prices given its 20% fuel burn advantage.
Until passed by its derivative, the GE9X, the GE90 series held the title of the largest engines in aviation history. The fan diameter of the original series being 123 in (310 cm), and the largest variant GE90-115B has a fan diameter of 128 in (330 cm). As a result, GE90 engines can only be air freighted in assembled form by outsize cargo aircraft such as the Antonov An-124, presenting unique problems if, due to emergency diversions, a 777 were stranded in a place without the proper spare parts. If the fan is removed from the core, then the engines may be shipped on a 747 Freighter.
According to the Guinness Book of Records, at 127,900 lbf (569 kN), the engine holds the record for the highest thrust (although rated at 115,300 lbf (513 kN)). This thrust record was accomplished inadvertently as part of a one-hour, triple-red-line engine stress test. To accommodate the increase in torsional stresses, a new steel alloy, GE1014 was created and then machined to extreme tolerances. The new record was set during testing of a GE90-115B development engine at GE Aviations' Peebles Test Operation, which is an outdoor test complex outside Peebles, Ohio. It eclipsed the engine's previous Guinness world record of 122,965 lbf (546.98 kN). On November 10, 2017, its successor, the GE9X, reached a higher record test thrust of 134,300 lbf (597 kN) in Peebles, Ohio.
In October 2003, a Boeing 777-300ER broke the ETOPS record by being able to fly five and a half hours (330 minutes) with one engine shut down. The aircraft, with GE90-115B engines, flew from Seattle to Taiwan as part of the ETOPS certification program.
On November 10, 2005, the GE90 entered the Guinness World Records for a second time. The GE90-110B1 powered a 777-200LR during the world's longest flight by a commercial airliner, though there were no fare-paying passengers on the flight, only journalists and invited guests. The 777-200LR flew 13,422 mi (21,601 km) in 22 hours, 42 minutes, flying from Hong Kong to London "the long way": over the Pacific, over the continental U.S., then over the Atlantic to London.
On August 11, 2004 a GE90-85B powering a Boeing 777-200ER on British Airways flight 2024 suffered an engine failure on takeoff from George Bush Intercontinental Airport, Houston. The pilots noticed a noise and vibration on takeoff but continued the rotation. At 1500 ft AGL they noticed smoke and haze in cockpit and cabin crew advised cabin was filling with smoke. They returned to the airport for an immediate emergency landing. Findings were a stage 2 turbine blade had separated at its shank damaging the trailing blades causing the vibration. The debris was contained in the engine casing.
On September 8, 2015, a GE90-85B powering a Boeing 777-236ER on British Airways Flight 2276 suffered an uncontained failure during take-off roll leading to a fire. NTSB and FAA investigations were begun to determine the cause; initial findings were reported in September 2015.
On June 27, 2016, a GE90-115B powering a Boeing 777-300ER, on Singapore Airlines Flight 368, received an engine oil warning during flight and returned to Singapore Changi Airport. On landing the malfunctioning right engine caught fire, leading to fire damage to the engine and the wing.
Transfer gearbox failures
The FAA issued an Airworthiness Directive (AD) on May 16, 2013, and sent it to owners and operators of General Electric GE90-110B1 and GE90-115B turbofan engines. This emergency AD was prompted by reports of two failures of transfer gearbox assemblies (TGBs) which resulted in in-flight shutdowns (IFSDs). Investigation revealed that the failures were caused by TGB radial gear cracking and separation. Further inspections found two additional radial gears with cracks. This condition, if not corrected, could result in additional IFSDs of one or more engines, loss of thrust control, and damage to the airplane. The Airworthiness Directive requires compliance by taking remedial measures within five days of receipt of the AD.
|Type||Dual rotor, axial flow, high bypass turbofan|
|Compressor||1 fan, 3-stage LP, 10-stage HP||1 fan, 4-stage LP, 9-stage HP|
|Turbine||2-stage HP, 6-stage LP|
|Length[a]||286.9 in (729 cm)||286.67 in (728.1 cm)|
|Max. width||152.4 in (387 cm)||148.38 in (376.9 cm)|
|Max. height||155.6 in (395 cm)||154.56 in (392.6 cm)|
|Fan diameter||123 in (310 cm)||128 in (330 cm)|
|Weight[b]||17,400 lb (7,893 kg)||19,316 lb (8,762 kg)|
|Takeoff thrust||81,070–97,300 lbf (360.6–432.8 kN)||110,760–115,540 lbf (492.7–513.9 kN)[c]|
|LP rotor speed||2,261.5 rpm||2,355 rpm|
|HP rotor speed||9,332 rpm|
|Bypass ratio||8.4 - 9||9|
|Takeoff TSFC||0.278 lb/lbf/h (28.3 kg/kN/h)|
|Cruise TSFC||0.545 lb/lbf/h (55.6 kg/kN/h)|
GE Aviation has also set up a cooperative venture with Pratt & Whitney, named Engine Alliance, under which the companies have developed an engine for the Airbus A380, named GP7000, based on an 0.72 flow scale of the GE90-110B/115B core.
In February 2012, GE announced studies on a 10% more efficient derivative, dubbed the GE9X, to power the new Boeing 777-8X/9X aircraft.
The LM9000 is an aeroderivative gas turbine available in two options; the LM9000 without water augmentation outputting 66 MW (89,000 hp) at a 42.4% efficiency before cogeneration, and the LM9000 with water augmentation outputting 75 MW (101,000 hp) at a 42.7% efficiency before cogeneration. The engine's 33:1 pressure ratio comes from a 4-stage low pressure compressor followed by a 9 stage high pressure compressor, driven by a 2 stage high pressure turbine and a 1-stage low pressure turbine, powering a 4-stage Free Turbine.
- Fan spinner to nozzle centerbody
- Dry, Includes basic engine, basic engine accessories, and optional equipment
- world record set at 127,900 lbf (569 kN) in testing 827 feet above sea level
- Brian J. Cantwell (February 2, 2010). "The GE90 - An Introduction" (PDF). Stanford University.
- Dominic Gates (January 4, 2019). "The biggest jet engines ever seen are set to roar on Boeing's 777X". Seattle Times.
- "GE90 secures exclusive position on 777X". Flight Global. July 14, 1999.
- "Record Year For The World's Largest, Most Powerful Jet Engine" (Press release). GE Aviation. January 19, 2012.
- The Short, Happy Life of the Prop-fan | History | Air & Space Magazine
- "First Year in Service for GE90 a Huge Success" (Press release). GE Aviation. November 18, 1996.
- "commercial aircraft engines -GE90" (PDF). Snecma. Safran.
- Scott Hamilton (December 14, 2017). "Top Airbus officials scoffed at Leahy's 50% market share goal". Leeham.
- "How Ge Locked Up That Boeing Order". Bloomberg. August 9, 1999.
- Eden, Paul, ed. (2008). Civil Aircraft Today: The World's Most Successful Commercial Aircraft. London: Amber Books Ltd. p. 115. ISBN 1-84509-324-0.
- Norris, Guy; Mark Wagner (1999). Modern Boeing Jetliners. Minneapolis, Minnesota: Zenith Imprint. pp. 143–144. ISBN 0-7603-0717-2.
- "Airbus A350 XWB puts pressure on Boeing 777". flightglobal. November 26, 2007.
- Ben Kingsley-Jones; Guy Norris (November 29, 2005). "Enhanced A340 to take on 777". Flight International.
- Jens Flottau (November 14, 2011). "Airbus Bids Adieu to A340, Postpones A350 Delivery". Aviation Week & Space Technology.
- "GE strives to identify Air France engine fault". Flight International. January 3, 2006.
- "The FAA Cleared The First 3D Printed Part To Fly In A Commercial Jet Engine From GE". GE reports. GE Aviation. April 14, 2015.
- "Etihad Airways signs engine agreements with GE for Boeing 777 Freighters" (Press release). GE Aviation. November 10, 2015.
- General Electric Biggest Jet Engine for B-777. History Channel. 2008. Event occurs at 3:00–3:10 min. Retrieved July 11, 2013.
- "GE90-115B certification: a look at the flight tests". Le Webmag. Safran. August 8, 2003. Archived from the original on November 1, 2006. Cite uses deprecated parameter
- "Impressive Progress of GE90-115B Engine Continues" (Press release). GE Aviation. July 24, 2000.
- "GE90 Sets New World Record For Thrust; Engine Completes FAR 33 Certification Tests" (Press release). GE Aviation. February 5, 2003.
- "GE9X Breaks GUINNESS WORLD RECORDS™ Title for Thrust" (Press release). GE Aviation. July 12, 2019.
- "Boeing 777-300ER Performs 330-Minute ETOPS Flight" (Press release). Boeing. October 15, 2003.
- "Flight-distance record awaits as big 777 heads to London". Seattle Post-Intelligencer. November 8, 2005.
- url= https://www.ntsb.gov/_layouts/ntsb.aviation/brief2.aspx?ev_id=20041015X01640&ntsbno=DCA04IA066&akey=1
- "Maintenance inspection a factor in 2012 Air Canada engine failure during take-off from Lester B. Pearson International Airport". Transportation Safety Board of Canada. December 13, 2013. Retrieved September 11, 2015.
- Edmiston, Jake (May 29, 2012). "Air Canada plane debris struck cars after engine failure, safety board confirms". National Post.
- Charles Alcock (September 8, 2015). "Engine Failure Causes Fire on British Airways Boeing 777". Aviation International News.
- "NTSB Issues Update on the British Airways Engine Fire at Las Vegas". NTSB. September 8, 2015. Retrieved August 8, 2015.
- "Fire damage apparent on SIA 777 wing". Flight Global. June 27, 2016.
- "Emergency airworthiness directive (AD) 2013-10-52" (PDF). FAA. May 16, 2013. sent to owners and operators of General Electric Company (GE) GE90-110B1 and GE90-115B turbofan engines.
- "Type Certificate Data Sheet E00049EN" (PDF). FAA. June 23, 2016.
- "GE90 Commercial Aircraft Engine". GE Aviation.
- "GE90-115B Fan Completing Blade Testing; On Schedule For First Engine To Test" (Press release). GE Aviation. June 17, 2001.
- "Engine Directory Part 1 - Turbofans". Flight International. November 14, 2000.
- Lloyd R. Jenkinson & al. (July 30, 1999). "Civil Jet Aircraft Design: Engine Data File". Elsevier/Butterworth-Heinemann.
- "LM9000". General Electric. Retrieved July 2, 2018.
- "LM9000 - The new prime mover for oil and gas" (PDF). General Electric. 2017.
|Wikimedia Commons has media related to General Electric GE90.|
- Official website
- "It's Great Design Too: World's Biggest Jet Engine Fan Blade at The Museum of Modern Art" (Press release). GE Aviation. November 16, 2004.