Some fields of engineering in the United States use a system of measurement of physical quantities known as the English Engineering units. The system is based on United States customary units of measure.
The English Engineering units is a set of consistent units used in the United States. The set is defined by the following units, with a comparison to the standard units based on the International System of Units.
|Dimension||English Engineering unit||SI unit||Approximate conversion[a]|
|time||second (s)||second (s)||1:1|
|length||foot (ft)||metre (m)||1 ft (0.30 m)|
|mass||pound mass (lb)||kilogram (kg)||1 lb (0.45 kg)|
|force||pound force (lbf)||newton (N)||1 lbf (4.4 N)|
|temperature||degree Fahrenheit (°F)||degree Celsius (°C)||1 °F (0.56 °C)|
|absolute temperature||degree Rankine (°R)||kelvin (K)||1 °R (0.556 K)|
Units for other physical quantities are derived from this set as needed.
In English Engineering units, the pound mass and the pound force are distinct base units, and Newton's Second Law of Motion takes the form F = ma/gc, where gc = 32.174 lb·ft/(lbf·s2).
A similar system, termed British engineering units by Halliday and Resnick, was a system that used the slug as the unit of mass, and in which Newton's law retains the form F = ma. (Modern British engineering practice has used SI base units since the late 1970s).
The term English units strictly refers to the system used in England until 1826, when it was replaced by (more rigorously defined) Imperial units. The United States continued to use the older definitions until the Mendenhall Order of 1893, which established the United States customary units. Nevertheless, the term "English units" persisted in common speech and was adapted as "English engineering units" but these are based on US customary units rather than the pre-1826 English system.
- Comings, E. W. (1940). "English Engineering Units and Their Dimensions". Ind. Eng. Chem. 32 (7): 984–987. doi:10.1021/ie50367a028.
- Klinkenberg, Adrian (1969). "The American Engineering System of Units and Its Dimensional Constant gc". Ind. Eng. Chem. 61 (4): 53–59. doi:10.1021/ie50712a010.
- R. Zucker, O. Biblarz (2002). Fundamentals of Gas Dynamics. Hoboken, New Jersey: John Wiley & Sons, Inc. ISBN 0-471-05967-6.
- International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), ISBN 92-822-2213-6, archived (PDF) from the original on 2017-08-14
- Halliday, David; Resnick, Robert (1974). Fundamentals of Physics (revised printing ed.). New York: Wiley. pp. 35, 68–69.
- Railway Construction and Operation Requirements – Structural and Electrical Clearances (PDF). London: Department of Transport. 1977. ISBN 0-11-550443-5. Retrieved 29 March 2012.
"an up-to-date metric guide" (para 1.2)
- For precise conversion ratios, see each unit's own article.