|Preferred IUPAC name
3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||66.103 g·mol−1|
|Density||0.786 g cm−3|
|Melting point||−90 °C; −130 °F; 183 K|
|Boiling point||39 to 43 °C; 102 to 109 °F; 312 to 316 K|
|Vapor pressure||400 mmHg (53 kPa)|
|Conjugate base||Cyclopentadienyl anion|
Heat capacity (C)
|115.3 J K−1 mol−1|
|182.7 J K−1 mol−1|
|Flash point||25 °C (77 °F; 298 K)|
|Lethal dose or concentration (LD, LC):|
LC50 (median concentration)
|14,182 ppm (rat, 2 hr)|
5091 ppm (mouse, 2 hr)
|NIOSH (US health exposure limits):|
|TWA 75 ppm (200 mg/m3)|
|TWA 75 ppm (200 mg/m3)|
IDLH (Immediate danger)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Cyclopentadiene is an organic compound with the formula C5H6. This colorless liquid has a strong and unpleasant odor. At room temperature, this cyclic diene dimerizes over the course of hours to give dicyclopentadiene via a Diels–Alder reaction. This dimer can be restored by heating to give the monomer.
The compound is mainly used for the production of cyclopentene and its derivatives. It is popularly used as a precursor to the cyclopentadienyl ligand (Cp) in cyclopentadienyl complexes in organometallic chemistry.
Production and reactions
Cyclopentadiene production is usually not distinguished from dicyclopentadiene since they are interconverted. They are obtained from coal tar (about 10–20 g/tonne) and by steam cracking of naphtha (about 14 kg/tonne). To obtain cyclopentadiene monomer, commercial dicyclopentadiene is cracked by heating to ~ 180 °C. The monomer is collected by distillation, and used soon thereafter.
The hydrogen atoms in cyclopentadiene undergo rapid [1,5]-sigmatropic shifts as indicated by 1H NMR spectra recorded at various temperatures. Even more fluxional are the derivatives C5H5E(CH3)3 (E = Si, Ge, Sn), wherein the heavier element migrates from carbon to carbon with a low activation barrier.
Cyclopentadiene is a highly reactive diene in the Diels–Alder reaction because minimal distortion of the diene is required to achieve the envelope geometry of the transition state compared to other dienes. Famously, cyclopentadiene dimerizes. The conversion occurs in hours at room temperature, but the monomer can be stored for days at −20 °C.
The compound is unusually acidic (pKa = 16) for a hydrocarbon, a fact explained by the high stability of the aromatic cyclopentadienyl anion, C
5. Deprotonation can be achieved with a variety of bases, typically sodium hydride, sodium metal, and butyl lithium. Salts of this anion are commercially available, including sodium cyclopentadienide and lithium cyclopentadienide. They are used to prepare cyclopentadienyl complexes.
Metallocenes and related cyclopentadienyl derivatives have been heavily investigated and represent a cornerstone of organometallic chemistry owing to their high stability. The first metallocene characterised, ferrocene, was prepared the way many other metallocenes are prepared: by combining alkali metal derivatives of the form MC5H5 with dihalides of the transition metals: As typical example, nickelocene forms upon treating nickel(II) chloride with sodium cyclopentadienide in THF.
- NiCl2 + 2 NaC5H5 → Ni(C5H5)2 + 2 NaCl
Organometallic complexes that include both the cyclopentadienyl anion and cyclopentadiene itself are known, one example of which is the rhodocene derivative produced from the rhodocene monomer in protic solvents.
It was the starting material in Leo Paquette's 1982 synthesis of dodecahedrane. The first step involved reductive dimerization of the molecule to give dihydrofulvalene, not simple addition to give dicyclopentadiene.
Aside from serving as a precursor to cyclopentadienyl-based catalysts, the main commercial application of cyclopentadiene is as a precursor to comonomers. Semi-hydrogenation gives cyclopentene. Diels-Alder reaction with butadiene gives ethylidene norbornene, a comonomer in the production of EPDM rubbers.
The commonly used abbreviation of the cyclopentadienyl anion is Cp. The abbreviation played a part in the naming of copernicium: the original proposal for the element's symbol was also Cp, but because of the abbreviation for this anion and the fact that lutetium was originally named cassiopeium and had Cp for the symbol as well, the symbol for copernicium was changed to Cn.
- Methylcyclopentadiene, pentamethylcyclopentadiene and pentacyanocyclopentadiene, also found as ligands in organometallic chemistry
- NIOSH Pocket Guide to Chemical Hazards. "#0170". National Institute for Occupational Safety and Health (NIOSH).
- William M. Haynes (2016). CRC Handbook of Chemistry and Physics [Physical Constants of Organic Compounds]. 97. CRC Press/Taylor and Francis. p. 276 (3-138). ISBN 978-1498754286.
- Faustov, Valery I.; Egorov, Mikhail P.; Nefedov, Oleg M.; Molin, Yuri N. (2000). "Ab initio G2 and DFT calculations on electron affinity of cyclopentadiene, silole, germole and their 2,3,4,5-tetraphenyl substituted analogs: structure, stability and EPR parameters of the radical anions". Phys. Chem. Chem. Phys. 2 (19): 4293–4297. Bibcode:2000PCCP....2.4293F. doi:10.1039/b005247g.
- "Cyclopentadiene". Immediately Dangerous to Life and Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
- Hartwig, J. F. (2010). Organotransition Metal Chemistry: From Bonding to Catalysis. New York, NY: University Science Books. ISBN 978-1-891389-53-5.
- Hönicke, Dieter; Födisch, Ringo; Claus, Peter; Olson, Michael. "Cyclopentadiene and Cyclopentene". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH.
- Moffett, Robert Bruce (1962). "Cyclopentadiene and 3-Chlorocyclopentene". Organic Syntheses.; Collective Volume, 4, p. 238
- Streitwieser, A.; Heathcock, C. H.; Kosower, E. M. (1998). Introduction to Organic Chemistry (4th ed.). Upper Saddle River, NJ: Prentice Hall.[ISBN missing]
- Levandowski, Brian; Houk, Ken (2015). "Theoretical Analysis of Reactivity Patterns in Diels–Alder Reactions of Cyclopentadiene, Cyclohexadiene, and Cycloheptadiene with Symmetrical and Unsymmetrical Dienophiles". J. Org. Chem. 80 (7): 3530–3537. doi:10.1021/acs.joc.5b00174. PMID 25741891.
- Fischer, E. O.; Wawersik, H. (1966). "Über Aromatenkomplexe von Metallen: LXXXVIII. Über Monomeres und Dimeres Dicyclopentadienylrhodium und Dicyclopentadienyliridium und Über Ein Neues Verfahren Zur Darstellung Ungeladener Metall-Aromaten-Komplexe" [On aromatic complexes of metals: LXXXVIII. On monomeric and dimeric dicyclopentadienylrhodium and dicyclopentadienyliridium, and a new method to represent uncharged metal–aromatic complexes]. J. Organomet. Chem. (in German). 5 (6): 559–567. doi:10.1016/S0022-328X(00)85160-8.
- Girolami, G. S.; Rauchfuss, T. B.; Angelici, R. J. (1999). Synthesis and Technique in Inorganic Chemistry. Mill Valley, CA: University Science Books. ISBN 0-935702-48-2.
- Jolly, W. L. (1970). The Synthesis and Characterization of Inorganic Compounds. Englewood Cliffs, NJ: Prentice-Hall. ISBN 0-13-879932-6.
- Kolle, U.; Grub, J. (1985). "Permethylmetallocene: 5. Reactions of Decamethylruthenium Cations". J. Organomet. Chem. 289 (1): 133–139. doi:10.1016/0022-328X(85)88034-7.
- Paquette, L. A.; Wyvratt, M. J. (1974). "Domino Diels–Alder reactions. I. Applications to the rapid construction of polyfused cyclopentanoid systems". J. Am. Chem. Soc. 96 (14): 4671–4673. doi:10.1021/ja00821a052.
- "Copernicium Video – The Periodic Table of Videos – University of Nottingham". Retrieved 2011-02-22.