|Developed into||Burnelli CBY-3|
Design and development
Following on from his earlier designs Vincent Burnelli designed a commercial transport version using the lifting-fuselage concept. Burnelli's designs were based on the idea that an airfoil-section fuselage would contribute to the lift generated. The Burnelli UB-14 first flew in 1934, the airfoil-section fuselage was the centre-section of the wing. The aircraft had twin tailbooms and a widespan tailplane and elevator fitted with twin fins and rudders. The UB-14 had retractable landing gear and was powered by two Pratt & Whitney radial engines. An enclosed cockpit for the crew of two was located on the centre wing's upper surface. The cabin held 14 to 18 passengers.
The first prototype, UB-14, was destroyed in a 1935 accident attributed to faulty maintenance on the aileron control system. Burnelli then designed and built an improved version, the UB-14B. A modified version of the UB-14B design was built under licence in the United Kingdom by Cunliffe-Owen Aircraft, powered by two Bristol Perseus XIVC radials as the Cunliffe-Owen OA-1. A contemporary photo shows the mockup of the original UB-14B, to be built by Scottish Aviation before bankruptcy. This design was to have had streamline inline engines. The OA-1 used radial engines.
The Cunliffe-Owen failed its airworthiness certification due to excessive takeoff run and poor workmanship. It was performance tested at the A&AEE Boscombe Down in 1939.
After appropriate work, in June 1941 Jim Mollison and an Air Transport Auxiliary crew delivered Cunliffe-Owen OA-1 G-AFMB to Fort Lamy, Chad. The aircraft was fitted out as a personal transport for General De Gaulle. It was later abandoned at RAF Kabrit in Egypt, and burned during VJ-Day celebrations. The other one aircraft landed in Vichy France en route to Fort Lamy
- UB-14 Prototype, powered by Pratt & Whitney engines. Built by Burnelli Company. Destroyed 13 January 1935, without injury to those aboard.
- UB-14B Second prototype with modifications. Built by Burnelli Company.
- UB-14B Third prototype, modified from second unit. Built by Cunliffe Owen Aircraft in United Kingdom.
- Crew: two
- Capacity: 14–18 passengers
- Length: 44 ft 0 in (13.41 m)
- Wingspan: 71 ft 0 in (21.64 m)
- Height: 10 ft 0 in (3.05 m)
- Wing area: 686 ft2 (63.73 m2)
- Empty weight: 9,200 lb (4173 kg)
- Gross weight: 17,500 lb (7938 kg)
- Powerplant: 2 × Pratt & Whitney Hornet radial piston engines, 750 hp (560 kW) each
- Maximum speed: 210 mph (383 km/h)
- Cruise speed: 205 mph (330 km/h)
- Range: 1240 miles (1996 km)
- Service ceiling: 22,000 ft (6705 m)
- Fuselage: NACA 4323
- Exterior wing, root: NACA 2412
- Exterior wing, tip: NACA 2409
Aircraft of comparable role, configuration and era
- "About". Burnelli successor company. Retrieved: November 28, 2015.
- "Fast Air Liner To Compete In Atlantic Race." Popular Mechanics, May 1937.
- "Ocean hop planned in metal airplane." The Washington Post, September 17, 1936.
- Mason 2010, p. 242.
- Aeroplane Monthly June 2006 p.95 with two bw plates
- Joss, D.A. "Flying Wing" Recollection, Flight International, 13 May 1965, pp. 750–751.
- Flight magazine, 1936 / pg. 1591
|Wikimedia Commons has media related to Burnelli UB-14.|