This article needs additional citations for verification. (September 2014) (Learn how and when to remove this template message)
|.300 Ruger Compact Magnum|
|Place of origin||USA|
|Parent case||.375 Ruger|
|Case type||Rimless, bottleneck|
|Bullet diameter||.308 in (7.8 mm)|
|Neck diameter||.340 in (8.6 mm)|
|Shoulder diameter||.515 in (13.1 mm)|
|Base diameter||.532 in (13.5 mm)|
|Rim diameter||.532 in (13.5 mm)|
|Rim thickness||.050 in (1.3 mm)|
|Case length||2.1 in (53 mm)|
|Overall length||2.825 in (71.8 mm)|
|Rifling twist||1-12" (304.8 mm)|
|Primer type||Large rifle|
|Maximum pressure (CIP)||63,817 psi (440.00 MPa)|
The .300 Ruger Compact Magnum or .300 RCM is a rimless, short-length rifle cartridge designed for the hunting of Medium-to-Large-sized North American game. It is designed to closely duplicate the performance of the historic .300 Winchester Magnum cartridge, yet to be chambered in a short length action rifle. The cartridge was designed by Hornady and Sturm Ruger in partnership and released commercially in 2008 and chambered in various Ruger rifles.
Design & Specifications
The .300 Ruger Compact Magnum uses a unique case designed by Hornady and Ruger based on the powerful .375 Ruger cartridge. The case is of a rimless design having the base and rim diameter of .532 in (13.5 mm) which is the same diameter of the belt on belted magnum cases based on the .300 H&H Magnum and .375 H&H Magnum. This allows the cartridge to have a greater case capacity than a belted magnum case given cases of equal length. As Ruger intended the cartridge to be chambered in short length bolt-action rifles the case length was shortened to 2.10 in (53 mm) which is similar to the .308 Winchester case. Unlike Winchester Short Magnum cartridges, the Ruger Compact Magnums share the same diameter from case head to body. This allowed Ruger to chamber the cartridge without extensively redesigning their M77 rifle to adopt them to the new Ruger cartridge.
While the .300 H&H Magnum is longer than the .300 Ruger Compact Magnum, the latter cartridge has a greater case capacity than the former. This is due to the .300 H&H Magnum having a long tapered body while the .300 Ruger Compact Magnum follows modern cartridge designs in that it has very little taper and a sharper shoulder. The dimensioned drawing is of the parent case .375 Ruger.
Hornady manufactures ammunition for the .300 Ruger Compact Magnum cartridge. The Hornady Superformance Ammunition drives a Hornady 180 gr (12 g) Interbond or SST bullet at 3,040 ft/s (930 m/s) and the 150 gr (9.7 g) SST bullets at 3,310 ft/s (1,010 m/s). The.300 Ruger Compact Magnum's greater case capacity, and the "short fat" cartridge efficiency lead to increases in the neighborhood of 150 fps over the H&H cartridge and is essentially the same performance as the .300 Winchester Magnum or .300 WSM.